kernel/git/stable/linux.git/arch/mips/ar7/gpio.c, branch master

MIPS: AR7: remove platform

2023-10-19T08:39:46+00:00

After a discussion about removing VLYNQ support from the Kernel, it was concluded that its only user, the AR7 platform can go [1]. Even OpenWRT has removed support because these devices are "stuck with 3.18" [2]. [1] https://lore.kernel.org/r/3395161f-2543-46f0-83d9-b918800305e1@gmail.com [2] https://openwrt.org/docs/techref/targets/ar7 Suggested-by: Jonas Gorski Signed-off-by: Wolfram Sang Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer

mips: ar7: include linux/gpio/driver.h

2023-03-10T11:40:18+00:00

The change to remove the implicit gpio/driver.h include was done after fixing all the other users, but the ar7 file still needs the same change. Reported-by: Naresh Kamboju Fixes: 21d9526d13b5 ("gpiolib: Make the legacy consumer-only") Signed-off-by: Arnd Bergmann Reviewed-by: Florian Fainelli Reviewed-by: Philippe Mathieu-Daudé Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Signed-off-by: Andy Shevchenko

mips: ar7: add missing iounmap() on error in ar7_gpio_init

2020-11-06T10:32:06+00:00

Add the missing iounmap() of gpch->regs before return from ar7_gpio_init() in the error handling case. Signed-off-by: Qinglang Miao Signed-off-by: Thomas Bogendoerfer

remove ioremap_nocache and devm_ioremap_nocache

2020-01-06T08:45:59+00:00

ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig Acked-by: Arnd Bergmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102

2019-05-24T15:39:00+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman

MIPS: Audit and remove any unnecessary uses of module.h

2017-02-14T09:00:25+00:00

Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker Cc: David Daney Cc: John Crispin Cc: Ralf Baechle Cc: "Steven J. Hill" Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan

MIPS: ar7: use gpiochip data pointer

2016-02-19T08:51:43+00:00

This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: linux-mips@linux-mips.org Cc: Alban Bedel Acked-by: Ralf Baechle Signed-off-by: Linus Walleij

MIPS: ar7: Be sure to clamp return value

2016-01-24T01:21:47+00:00

As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij Acked-by: Florian Fainelli Cc: Alban Bedel Cc: linux-mips@linux-mips.org Cc: linux-gpio@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11922/ Signed-off-by: Ralf Baechle

MIPS: Remove all the uses of custom gpio.h

2015-09-03T10:08:02+00:00

Currently CONFIG_ARCH_HAVE_CUSTOM_GPIO_H is defined for all MIPS machines, and each machine type provides its own gpio.h. However only a handful really implement the GPIO API, most just forward everythings to gpiolib. The Alchemy machine is notable as it provides a system to allow implementing the GPIO API at the board level. But it is not used by any board currently supported, so it can also be removed. For most machine types we can just remove the custom gpio.h, as well as the custom wrappers if some exists. Some of the code found in the wrappers must be moved to the respective GPIO driver. A few more fixes are need in some drivers as they rely on linux/gpio.h to provides some machine specific definitions, or used asm/gpio.h instead of linux/gpio.h for the gpio API. Signed-off-by: Alban Bedel Reviewed-by: Linus Walleij Cc: linux-mips@linux-mips.org Cc: Hauke Mehrtens Cc: Rafał Miłecki Cc: Bartlomiej Zolnierkiewicz Cc: Tejun Heo Cc: Alexandre Courbot Cc: Dmitry Torokhov Cc: Florian Fainelli Cc: Manuel Lauss Cc: Joe Perches Cc: Daniel Walter Cc: Sergey Ryazanov Cc: Huacai Chen Cc: James Hartley Cc: Andrew Bresticker Cc: Paul Burton Cc: Jiri Kosina Cc: Bjorn Helgaas Cc: Wolfram Sang Cc: Randy Dunlap Cc: Varka Bhadram Cc: Masanari Iida Cc: Tomi Valkeinen Cc: Michael Buesch Cc: abdoulaye berthe Cc: linux-kernel@vger.kernel.org Cc: linux-ide@vger.kernel.org Cc: linux-gpio@vger.kernel.org Cc: linux-input@vger.kernel.org Cc: netdev@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10828/ Signed-off-by: Ralf Baechle

MIPS: AR7: constify some arrays in gpio and prom code

2011-12-07T22:02:34+00:00

Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2980/ Signed-off-by: Ralf Baechle