kernel/git/stable/linux.git/arch/mips/bcm63xx, branch linux-3.5.y

mips: mark const init data with initconst instead of initdata

2012-07-19T09:23:43+00:00

As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König Cc: linux-mips@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel@pengutronix.de Patchwork: https://patchwork.linux-mips.org/patch/3565/ Signed-off-by: Ralf Baechle

MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.

2012-05-21T14:09:36+00:00

Signed-off-by: Ralf Baechle

mips: Fix typo in bcm63xx/setup.c

2012-02-05T16:14:47+00:00

Correct spelling "reseting" to "resetting" in arch/mips/bcm63xx/setup.c Signed-off-by: Masanari Iida Signed-off-by: Jiri Kosina

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2012-01-14T21:05:21+00:00

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (119 commits) MIPS: Delete unused function add_temporary_entry. MIPS: Set default pci cache line size. MIPS: Flush huge TLB MIPS: Octeon: Remove SYS_SUPPORTS_HIGHMEM. MIPS: Octeon: Add support for OCTEON II PCIe MIPS: Octeon: Update PCI Latency timer and enable more error reporting. MIPS: Alchemy: Update cpu-feature-overrides MIPS: Alchemy: db1200: Improve PB1200 detection. MIPS: Alchemy: merge Au1000 and Au1300-style IRQ controller code. MIPS: Alchemy: chain IRQ controllers to MIPS IRQ controller MIPS: Alchemy: irq: register pm at irq init time MIPS: Alchemy: Touchscreen support on DB1100 MIPS: Alchemy: Hook up IrDA on DB1000/DB1100 net/irda: convert au1k_ir to platform driver. MIPS: Alchemy: remove unused board headers MTD: nand: make au1550nd.c a platform_driver MIPS: Netlogic: Mark Netlogic chips as SMT capable MIPS: Netlogic: Add support for XLP 3XX cores MIPS: Netlogic: Merge some of XLR/XLP wakup code MIPS: Netlogic: Add default XLP config. ... Fix up trivial conflicts in arch/mips/kernel/{perf_event_mipsxx.c, traps.c} and drivers/tty/serial/Makefile

MIPS: BCM63XX: use the new bcm63xxpart parser

2012-01-09T18:16:25+00:00

Signed-off-by: Jonas Gorski Acked-by: Florian Fainelli Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse

MIPS: BCM63XX: generate WLAN MAC address after registering ethernet devices.

2011-12-07T22:03:04+00:00

In case the MAC address pool is not big enough to also register a WLAN device prefer registering the Ethernet devices. [ralf@linux-mips.org: Fixed formatting as per Sergei's complaint.] Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3013/ Signed-off-by: Ralf Baechle

MIPS: BCM63xx: Fix GPIO set/get for BCM6345

2011-12-07T22:03:04+00:00

On BCM6345, the register offsets for the set/get GPIO registers is wrong. Use the same logic as the one present in arch/mips/bcm63xx/irq.c to define the correct gpio_out_low_reg value when support for BCM6345 is compiled in. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3010/ Signed-off-by: Ralf Baechle

MIPS: BCM63xx: Remove BCM6345 hacks to read base boot address

2011-12-07T22:03:04+00:00

Though BCM6345 does not technically have the same MPI register layout than the other SoCs, reading the chip-select registers is done the same way, and particularly for chip-select 0, which is the boot flash. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3009/ Signed-off-by: Ralf Baechle

MIPS: BCM63xx: Fix SDRAM size computation for BCM6345

2011-12-07T22:03:04+00:00

Instead of hardcoding the amount of available RAM, read the number of effective multiples of 8MB from SDRAM_MBASE_REG. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3008/ Signed-off-by: Ralf Baechle

MIPS: BCM63XX: Add support for bcm6368 CPU.

2011-12-07T22:03:04+00:00

Signed-off-by: Maxime Bizon Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2892/ Signed-off-by: Ralf Baechle

kernel/git/stable/linux.git/arch/mips/bcm63xx, branch linux-3.5.y

mips: mark const init data with __initconst instead of __initdata

MIPS: Remove all -Wall and almost all -Werror usage from arch/mips.

mips: Fix typo in bcm63xx/setup.c

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

MIPS: BCM63XX: use the new bcm63xxpart parser

MIPS: BCM63XX: generate WLAN MAC address after registering ethernet devices.

MIPS: BCM63xx: Fix GPIO set/get for BCM6345

MIPS: BCM63xx: Remove BCM6345 hacks to read base boot address

MIPS: BCM63xx: Fix SDRAM size computation for BCM6345

MIPS: BCM63XX: Add support for bcm6368 CPU.

mips: mark const init data with initconst instead of initdata