kernel/git/stable/linux.git/arch/mips/boot, branch linux-4.11.y

MIPS: .its targets depend on vmlinux

2017-06-24T05:06:21+00:00

commit bcd7c45e0d5a82be9a64b90050f0e09d41a50758 upstream. The .its targets require information about the kernel binary, such as its entry point, which is extracted from the vmlinux ELF. We therefore require that the ELF is built before the .its files are generated. Declare this requirement in the Makefile such that make will ensure this is always the case, otherwise in corner cases we can hit issues as the .its is generated with an incorrect (either invalid or stale) entry point. Signed-off-by: Paul Burton Fixes: cf2a5e0bb4c6 ("MIPS: Support generating Flattened Image Trees (.itb)") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16179/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

MIPS: DTS: Add img directory to Makefile

2017-02-17T11:16:46+00:00

An img directory exists for the Pistchio SoC device tree but the directory itself isn't in the dts Makefile meaning the dtbs never get built. Fixes: daa10170da27 ("MIPS: DTS: img: add device tree for Marduk board") Signed-off-by: Ian Pozella Reviewed-by: Rahul Bedarkar Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15309/ Signed-off-by: James Hogan

MIPS: BMIPS: Add support SPI device nodes

2017-01-24T17:30:34+00:00

Adds SPI device nodes to BCM7xxx MIPS based SoCs. Signed-off-by: Jaedon Shin Reviewed-by: Florian Fainelli Cc: Kevin Cernekee Cc: Rob Herring Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14990/ Signed-off-by: Ralf Baechle

MIPS: zboot: Consolidate compiler flag filtering.

2017-01-03T15:48:40+00:00

Al Viro noticed that we were using two different methods to filter out flags from KBUILD_CFLAGS. Signed-off-by: Ralf Baechle Reported-by: Al Viro

MIPS: DTS: img: add device tree for Marduk board

2017-01-03T15:34:41+00:00

Add support for Imagination Technologies' Marduk board which is based on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy name and will be there for decades. Documentation for this board can be found on https://docs.creatordev.io/ci40/ This patch adds initial support for board with following peripherals: * PWM based heartbeat LED * GPIO based buttons * SPI NOR flash on SPI1 * UART0 and UART1 * SD card * Ethernet * USB * PWM * ADC * I2C Signed-off-by: Rahul Bedarkar Acked-by: Rob Herring Acked-by: James Hartley Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14394/ Signed-off-by: Ralf Baechle

MIPS: DTS: Add base device tree for Pistachio SoC

2017-01-03T15:34:41+00:00

Add support for the base Device Tree for Imagination Technologies' Pistachio SoC. This commit supports the following peripherals: * Clocks * Pinctrl and GPIO * UART * SPI * I2C * PWM * ADC * Watchdog * Ethernet * MMC * DMA engine * Crypto * I2S * SPDIF * Internal DAC * Timer * USB * IR * Interrupt Controller Signed-off-by: Rahul Bedarkar Acked-by: James Hartley Cc: Rob Herring Cc: Mark Rutland Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14393/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Add DT node for AXI emaclite

2017-01-03T15:34:40+00:00

The xilfpga platform has a Xilinx AXI emaclite block. Add the DT node to use it. Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14596/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Add DT node for AXI I2C

2017-01-03T15:34:39+00:00

The xilfpga platform has an AXI I2C Bus master with a temperature sensor connected to it. Add the device tree node to use them. Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14594/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Update DT node and specify uart irq

2017-01-03T15:34:39+00:00

Update the DT node with the UART irq Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14593/ Signed-off-by: Ralf Baechle

MIPS: xilfpga: Use Xilinx Interrupt Controller

2017-01-03T15:34:39+00:00

IRQs from peripherals such as i2c/uart/ethernet come via the AXI Interrupt controller. Select it in Kconfig for xilfpga and add the DT node Signed-off-by: Zubair Lutfullah Kakakhel Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14592/ Signed-off-by: Ralf Baechle