kernel/git/stable/linux.git/arch/mips/loongson/common, branch master

MIPS: Loongson: Naming style cleanup and rework

2015-06-21T19:53:59+00:00

Currently, code of Loongson-2/3 is under loongson directory and code of Loongson-1 is under loongson1 directory. Besides, there are Kconfig options such as MACH_LOONGSON and MACH_LOONGSON1. This naming style is very ugly and confusing. Since Loongson-2/3 are both 64-bit general- purpose CPU while Loongson-1 is 32-bit SoC, we rename both file names and Kconfig symbols from loongson/loongson1 to loongson64/loongson32. [ralf@linux-mips.org: Resolve a number of simple conflicts.] Signed-off-by: Huacai Chen Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Cc: Kelvin Cheung Patchwork: https://patchwork.linux-mips.org/patch/9790/ Signed-off-by: Ralf Baechle

MIPS: Loongson: Do not register 8250 platform device from module.

2015-06-10T08:43:07+00:00

If CONFIG_SERIAL_8250 is set to m, the Loongson seria.ko module might get unloaded while the serial driver modules are still loaded resulting in stale references to the destroyed platform_device instance. Anyway, platform devices should always be registered indicated what devices are present, _not_ what drivers have been configured. Signed-off-by: Ralf Baechle Reported-by: Paul Gortmaker Patchwork: https://patchwork.linux-mips.org/patch/10538/

Merge tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2015-04-18T12:22:10+00:00

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.1 development cycle: - A new GPIO hogging mechanism has been added. This can be used on boards that want to drive some GPIO line high, low, or set it as input on boot and then never touch it again. For some embedded systems this is bliss and simplifies things to a great extent. - Some API cleanup and closure: gpiod_get_array() and gpiod_put_array() has been added to get and put GPIOs in bulk as was possible with the non-descriptor API. - Encapsulate cross-calls to the pin control subsystem in . Now this should be the only header any GPIO driver needs to include or something is wrong. Cleanups restricting drivers to this include are welcomed if tested. - Sort the GPIO Kconfig and split it into submenus, as it was becoming and unstructured, illogical and unnavigatable mess. I hope this is easier to follow. Menus that require a certain subsystem like I2C can now be hidden nicely for example, still working on others. - New drivers: - New driver for the Altera Soft GPIO. - The F7188x driver now handles the F71869 and F71869A variants. - The MIPS Loongson driver has been moved to drivers/gpio for consolidation and cleanup. - Cleanups: - The MAX732x is converted to use the GPIOLIB_IRQCHIP infrastructure. - The PCF857x is converted to use the GPIOLIB_IRQCHIP infrastructure. - Radical cleanup of the OMAP driver. - Misc: - Enable the DWAPB GPIO for all architectures. This is a "hard IP" block from Synopsys which has started to turn up in so diverse architectures as X86 Quark, ARC and a slew of ARM systems. So even though it's not an expander, it's generic enough to be available for all. - We add a mock GPIO on Crystalcove PMIC after a long discussion with Daniel Vetter et al, tracing back to the shootout at the kernel summit where DRM drivers and sub-componentization was discussed. In this case a mock GPIO is assumed to be the best compromise gaining some reuse of infrastructure without making DRM drivers overly complex at the same time. Let's see" * tag 'gpio-v4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (62 commits) Revert "gpio: sch: use uapi/linux/pci_ids.h directly" gpio: dwapb: remove dependencies gpio: dwapb: enable for ARC gpio: removing kfree remove functionality gpio: mvebu: Fix mask/unmask managment per irq chip type gpio: split GPIO drivers in submenus gpio: move MFD GPIO drivers under their own comment gpio: move BCM Kona Kconfig option gpio: arrange SPI Kconfig symbols alphabetically gpio: arrange PCI GPIO controllers alphabetically gpio: arrange I2C Kconfig symbols alphabetically gpio: arrange Kconfig symbols alphabetically gpio: ich: Implement get_direction function gpio: use (!foo) instead of (foo == NULL) gpio: arizona: drop owner assignment from platform_drivers gpio: max7300: remove 'ret' variable gpio: use devm_kzalloc gpio: sch: use uapi/linux/pci_ids.h directly gpio: x-gene: fix devm_ioremap_resource() check gpio: loongson: Add Loongson-3A/3B GPIO driver support ...

MIPS: Move Loongson GPIO driver to drivers/gpio

2015-04-07T09:15:56+00:00

Move Loongson-2's GPIO driver to drivers/gpio and add Kconfig options. Acked-by: Ralf Baechle Signed-off-by: Huacai Chen Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij

MIPS: Cleanup Loongson-2F's gpio driver

2015-04-07T09:13:56+00:00

This cleanup is prepare to move the driver to drivers/gpio. Custom definitions of gpio_get_value()/gpio_set_value() are dropped. Acked-by: Ralf Baechle Signed-off-by: Huacai Chen Reviewed-by: Alexandre Courbot Signed-off-by: Linus Walleij

MIPS: Loongson-3: Add chipset ACPI platform driver

2015-04-01T15:22:18+00:00

This add south-bridge (SB700/SB710/SB800 chipset) ACPI platform driver for Loongson-3. This will be used by EC (Embedded Controller, used by laptops) driver and STR (Suspend To RAM). [ralf@linux-mips.org: Fix build error if !CONFIG_CPU_LOONGSON3. Build doesn't like it if no obj-* variable is defined at all in a Makefile. Obviously this has not been tested on other platforms.] Signed-off-by: Huacai Chen Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Patchwork: https://patchwork.linux-mips.org/patch/9619/ Signed-off-by: Ralf Baechle

MIPS: Loongson-3: Add CPU Hwmon platform driver

2015-04-01T15:22:17+00:00

This add CPU Hwmon (temperature sensor) platform driver for Loongson-3. Signed-off-by: Huacai Chen Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Patchwork: https://patchwork.linux-mips.org/patch/9617/ Signed-off-by: Ralf Baechle

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2014-12-12T01:56:37+00:00

Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...

MIPS: loongson: common: rtc: make loongson_rtc_resources static

2014-11-24T06:45:35+00:00

Make loongson_rtc_resources static to eliminate the following sparse warning: warning: symbol 'loongson_rtc_resources' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8529/ Signed-off-by: Ralf Baechle

MIPS: loongson: common: init: Add a missing include

2014-11-24T06:45:35+00:00

Add a missing include to eliminate the following sparse warnings: warning: symbol 'prom_init' was not declared. Should it be static? warning: symbol 'prom_free_prom_memory' was not declared. Should it be static? Signed-off-by: Aaro Koskinen Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8531/ Signed-off-by: Ralf Baechle