kernel/git/stable/linux.git/arch/mips/pci, branch linux-3.5.y

MIPS: pci-ar724x: avoid data bus error due to a missing PCIe module

2012-09-14T16:59:23+00:00

commit a1dca315ce3f78347bca8ce8befe3cc71ae63b7e upstream. If the controller has no PCIe module attached, accessing of the device configuration space causes a data bus error. Avoid this by checking the status of the PCIe link in advance, and indicate an error if the link is down. Signed-off-by: Gabor Juhos Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4293/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2012-07-20T19:02:02+00:00

Pull late MIPS fixes from Ralf Baechle: "This fixes a number of lose ends in the MIPS code and various bug fixes. Aside of dropping some patch that should not be in this pull request everything has sat in -next for quite a while and there are no known issues. The biggest patch in this patch set moves the allocation of an array that is aliased to a function (for runtime generated code) to assembler code. This avoids an issue with certain toolchains when building for microMIPS." * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (35 commits) MIPS: PCI: Move fixups from __init to __devinit. MIPS: Fix bug.h MIPS build regression MIPS: sync-r4k: remove redundant irq operation MIPS: smp: Warn on too early irq enable MIPS: call set_cpu_online() on cpu being brought up with irq disabled MIPS: call ->smp_finish() a little late MIPS: Yosemite: delay irq enable to ->smp_finish() MIPS: SMTC: delay irq enable to ->smp_finish() MIPS: BMIPS: delay irq enable to ->smp_finish() MIPS: Octeon: delay enable irq to ->smp_finish() MIPS: Oprofile: Fix build as a module. MIPS: BCM63XX: Fix BCM6368 IPSec clock bit MIPS: perf: Fix build error caused by unused counters_per_cpu_to_total() MIPS: Fix Magic SysRq L kernel crash. MIPS: BMIPS: Fix duplicate header inclusion. mips: mark const init data with __initconst instead of __initdata MIPS: cmpxchg.h: Add missing include MIPS: Malta may also be equipped with MIPS64 R2 processors. MIPS: Fix typo multipy -> multiply MIPS: Cavium: Fix duplicate ARCH_SPARSEMEM_ENABLE in kconfig. ...

MIPS: PCI: Move fixups from init to devinit.

2012-07-19T09:27:23+00:00

Fixups are executed once the pci-device is found which is during boot process so __init seems fine as long as the platform does not support hotplug. However it is possible to remove the PCI bus at run time and have it rediscovered again via "echo 1 > /sys/bus/pci/rescan" and this will call the fixups again. [ralf@linux-mips.org: Made piixirqmap[] in malta_piix_func0_fixup() __initdata.] Signed-off-by: Sebastian Andrzej Siewior Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle

mips: mark const init data with initconst instead of initdata

2012-07-19T09:23:43+00:00

As long as there is no other non-const variable marked __initdata in the same compilation unit it doesn't hurt. If there were one however compilation would fail with error: $variablename causes a section type conflict because a section containing const variables is marked read only and so cannot contain non-const variables. Signed-off-by: Uwe Kleine-König Cc: linux-mips@linux-mips.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel@pengutronix.de Patchwork: https://patchwork.linux-mips.org/patch/3565/ Signed-off-by: Ralf Baechle

mips: pci-lantiq: Fix check for valid gpio

2012-07-05T13:02:18+00:00

This patch fixes two checks for valid gpio number, formerly (wrongly) considering zero as invalid, now using gpio_is_valid(). Signed-off-by: Roland Stigge Signed-off-by: Linus Walleij

MIPS: Netlogic: MSI enable fix for XLS

2012-07-03T16:57:19+00:00

MSI interrupts do not work on XLS after commit a776c49 ( "PCI: msi: Disable msi interrupts when we initialize a pci device" ) because the change disables MSI interrupts on the XLS PCIe bridges during the PCI enumeration. Fix this by enabling MSI interrupts on the bridge in the arch_setup_msi_irq() function. A new function xls_get_pcie_link() has been introduced to get the PCI device corresponding to the top level PCIe bridge on which MSI has to be enabled. Also, update get_irq_vector() to use the new xls_get_pcie_link() function and PCI_SLOT() macro for determining the IRQ of PCI devices. Signed-off-by: Ganesan Ramalingam Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3753/ Signed-off-by: Ralf Baechle

MIPS: Netlogic: Fix PCIX irq on XLR chips

2012-07-03T16:57:19+00:00

The correct irq is PIC_PCIX_IRQ Signed-off-by: Jayachandran C Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3750/ Signed-off-by: Ralf Baechle

Merge branches 'fixes-for-linus', 'generic', 'cavium', 'module.h-fixes', 'next/ath79' and 'next/lantiq' into mips-for-linux-next

2012-05-26T18:55:48+00:00

MIPS: pci: convert lantiq driver to OF

2012-05-21T13:31:52+00:00

Implement support for OF inside the lantiq PCI driver. The patch also splits pcibios_plat_dev_init and pcibios_map_irq out into their own file to accomodate coexistance with the upcoming pcie driver. Signed-off-by: John Crispin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3806/ Signed-off-by: Ralf Baechle

MIPS: lantiq: drop ltq_gpio_request() and gpio_to_irq()

2012-05-21T13:31:50+00:00

As part of the conversion to OF we also implement pinctrl drivers. Previously we used ltq_gpio_request() to set pinmuxing. This is now obselete and we can hence drop the function. Additionally we remove gpio_to_irq() from the gpio driver and move it to a header file. Signed-off-by: John Crispin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3801/ Signed-off-by: Ralf Baechle