kernel/git/stable/linux.git/arch/mips, branch linux-5.7.y

KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

2020-08-26T09:42:24+00:00

commit fdfe7cbd58806522e799e2a50a15aee7f2cbb7b6 upstream. The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

MIPS: Fix unable to reserve memory for Crash kernel

2020-08-26T09:42:11+00:00

[ Upstream commit b1ce9716f3b5ed3b49badf1f003b9e34b7ead0f9 ] Use 0 as the align parameter in memblock_find_in_range() is incorrect when we reserve memory for Crash kernel. The environment as follows: [ 0.000000] MIPS: machine is loongson,loongson64c-4core-rs780e ... [ 1.951016] crashkernel=64M@128M The warning as follows: [ 0.000000] Invalid memory region reserved for crash kernel And the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 1a000000-1bffffff : pci@1a000000 ... The align parameter may be finally used by round_down() or round_up(). Like the following call tree: mips-next: mm/memblock.c memblock_find_in_range └── memblock_find_in_range_node ├── __memblock_find_range_bottom_up │ └── round_up └── __memblock_find_range_top_down └── round_down \#define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) \#define round_down(x, y) ((x) & ~__round_mask(x, y)) \#define __round_mask(x, y) ((__typeof__(x))((y)-1)) The round_down(or round_up)'s second parameter must be a power of 2. If the second parameter is 0, it both will return 0. Use 1 as the parameter to fix the bug and the iomem as follows: 00200000-0effffff : System RAM 04000000-0484009f : Kernel code 048400a0-04ad7fff : Kernel data 04b40000-05c4c6bf : Kernel bss 08000000-0bffffff : Crash kernel 1a000000-1bffffff : pci@1a000000 ... Signed-off-by: Jinyang He Reviewed-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: SGI-IP27: always enable NUMA in Kconfig

2020-08-21T11:07:26+00:00

commit 6c86a3029ce3b44597526909f2e39a77a497f640 upstream. When a configuration has NUMA disabled and SGI_IP27 enabled, the build fails: CC kernel/bounds.s CC arch/mips/kernel/asm-offsets.s In file included from arch/mips/include/asm/topology.h:11, from include/linux/topology.h:36, from include/linux/gfp.h:9, from include/linux/slab.h:15, from include/linux/crypto.h:19, from include/crypto/hash.h:11, from include/linux/uio.h:10, from include/linux/socket.h:8, from include/linux/compat.h:15, from arch/mips/kernel/asm-offsets.c:12: include/linux/topology.h: In function 'numa_node_id': arch/mips/include/asm/mach-ip27/topology.h:16:27: error: implicit declaration of function 'cputonasid'; did you mean 'cpu_vpe_id'? [-Werror=implicit-function-declaration] #define cpu_to_node(cpu) (cputonasid(cpu)) ^~~~~~~~~~ include/linux/topology.h:119:9: note: in expansion of macro 'cpu_to_node' return cpu_to_node(raw_smp_processor_id()); ^~~~~~~~~~~ include/linux/topology.h: In function 'cpu_cpu_mask': arch/mips/include/asm/mach-ip27/topology.h:19:7: error: implicit declaration of function 'hub_data' [-Werror=implicit-function-declaration] &hub_data(node)->h_cpus) ^~~~~~~~ include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node' return cpumask_of_node(cpu_to_node(cpu)); ^~~~~~~~~~~~~~~ arch/mips/include/asm/mach-ip27/topology.h:19:21: error: invalid type argument of '->' (have 'int') &hub_data(node)->h_cpus) ^~ include/linux/topology.h:210:9: note: in expansion of macro 'cpumask_of_node' return cpumask_of_node(cpu_to_node(cpu)); ^~~~~~~~~~~~~~~ Before switch from discontigmem to sparsemem, there always was CONFIG_NEED_MULTIPLE_NODES=y because it was selected by DISCONTIGMEM. Without DISCONTIGMEM it is possible to have SPARSEMEM without NUMA for SGI_IP27 and as many things there rely on custom node definition, the build breaks. As Thomas noted "... there are right now too many places in IP27 code, which assumes NUMA enabled", the simplest solution would be to always enable NUMA for SGI-IP27 builds. Reported-by: kernel test robot Fixes: 397dc00e249e ("mips: sgi-ip27: switch from DISCONTIGMEM to SPARSEMEM") Cc: stable@vger.kernel.org Signed-off-by: Mike Rapoport Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

MIPS: qi_lb60: Fix routing to audio amplifier

2020-08-21T11:07:26+00:00

commit 0889a67a9e7a56ba39af223d536630b20b877fda upstream. The ROUT (right channel output of audio codec) was connected to INL (left channel of audio amplifier) instead of INR (right channel of audio amplifier). Fixes: 8ddebad15e9b ("MIPS: qi_lb60: Migrate to devicetree") Cc: stable@vger.kernel.org # v5.3 Signed-off-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

MIPS: CPU#0 is not hotpluggable

2020-08-21T11:07:26+00:00

commit 9cce844abf07b683cff5f0273977d5f8d0af94c7 upstream. Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices /system/cpu/cpu0/online which confuses some user-space tools. Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

irqdomain/treewide: Free firmware node after domain removal

2020-08-19T06:24:18+00:00

commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream. Commit 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commit e3beca48a45b fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed. The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards. Add the missing free operations after domain removal where where appropriate. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Signed-off-by: Jon Derrick Signed-off-by: Thomas Gleixner Reviewed-by: Andy Shevchenko Acked-by: Bjorn Helgaas # drivers/pci Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com Signed-off-by: Greg Kroah-Hartman

MIPS: OCTEON: add missing put_device() call in dwc3_octeon_device_init()

2020-08-19T06:23:59+00:00

[ Upstream commit e8b9fc10f2615b9a525fce56981e40b489528355 ] if of_find_device_by_node() succeed, dwc3_octeon_device_init() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: 93e502b3c2d4 ("MIPS: OCTEON: Platform support for OCTEON III USB controller") Signed-off-by: Yu Kuai Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

irqdomain/treewide: Keep firmware node unconditionally allocated

2020-07-29T08:19:37+00:00

[ Upstream commit e3beca48a45b5e0e6e6a4e0124276b8248dcc9bb ] Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after creating the irqdomain. The only purpose of these FW nodes is to convey name information. When this was introduced the core code did not store the pointer to the node in the irqdomain. A recent change stored the firmware node pointer in irqdomain for other reasons and missed to notice that the usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence are broken by this. Storing a dangling pointer is dangerous itself, but in case that the domain is destroyed later on this leads to a double free. Remove the freeing of the firmware node after creating the irqdomain from all affected call sites to cure this. Fixes: 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") Reported-by: Andy Shevchenko Signed-off-by: Thomas Gleixner Acked-by: Bjorn Helgaas Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de Signed-off-by: Sasha Levin

MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen

2020-07-09T07:39:39+00:00

commit fcec538ef8cca0ad0b84432235dccd9059c8e6f8 upstream. This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd935c34b ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by: Hauke Mehrtens Cc: Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names

2020-07-09T07:39:38+00:00

commit 03e62fd67d3ab33f39573fc8787d89dc9b4d7255 upstream. The dt-bindings for the GSWIP describe that the node should be named "switch". Use the same name in sysctrl.c so the GSWIP driver can actually find the "gphy0" and "gphy1" clocks. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl Acked-by: Hauke Mehrtens Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman