kernel/git/stable/linux.git/arch/nios2/Makefile, branch linux-5.19.y

kbuild: factor out the common installation code into scripts/install.sh

2022-05-11T12:45:53+00:00

Many architectures have similar install.sh scripts. The first half is really generic; it verifies that the kernel image and System.map exist, then executes ~/bin/${INSTALLKERNEL} or /sbin/${INSTALLKERNEL} if available. The second half is kind of arch-specific; it copies the kernel image and System.map to the destination, but the code is slightly different. Factor out the generic part into scripts/install.sh. Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier

kbuild: use more subdir- for visiting subdirectories while cleaning

2021-10-24T04:49:46+00:00

Documentation/kbuild/makefiles.rst suggests to use "archclean" for cleaning arch/$(SRCARCH)/boot/, but it is not a hard requirement. Since commit d92cc4d51643 ("kbuild: require all architectures to have arch/$(SRCARCH)/Kbuild"), we can use the "subdir- += boot" trick for all architectures. This can take advantage of the parallel option (-j) for "make clean". I also cleaned up the comments in arch/$(SRCARCH)/Makefile. The "archdep" target no longer exists. Signed-off-by: Masahiro Yamada Reviewed-by: Kees Cook Acked-by: Geert Uytterhoeven Acked-by: Michael Ellerman (powerpc)

nios2: move the install rule to arch/nios2/Makefile

2021-09-22T00:26:24+00:00

Currently, the install target in arch/nios2/Makefile descends into arch/nios2/boot/Makefile to invoke the shell script, but it is no good reason to do so. arch/nios2/Makefile can run the shell script directly. Signed-off-by: Masahiro Yamada

kbuild: consolidate Devicetree dtb build rules

2018-10-02T14:23:21+00:00

There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon Acked-by: Paul Burton Acked-by: Ley Foon Tan Acked-by: Masahiro Yamada Cc: Michal Marek Cc: Vineet Gupta Cc: Russell King Cc: Catalin Marinas Cc: Yoshinori Sato Cc: Michal Simek Cc: Ralf Baechle Cc: James Hogan Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Chris Zankel Cc: Max Filippov Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring

nios2: use common rules to build built-in dtb

2018-10-02T14:22:49+00:00

Using the common build support for built-in dtb files just requires adding a .dtb.o target to obj-y. This has the side effect that CONFIG_NIOS2_DTB_SOURCE should now be just the dts filename in arch/nios2/boot/dts/ directory. Before any path was supported, but if you want to build in your dtb to the kernel, it should be in the kernel tree. Cc: Ley Foon Tan Cc: nios2-dev@lists.rocketboards.org Signed-off-by: Rob Herring

nios2: build .dtb files in dts directory

2018-10-02T14:22:49+00:00

Align nios2 with other architectures which build the dtb files in the same directory as the dts files. This is also in line with most other build targets which are located in the same directory as the source. This move will help enable the 'dtbs' target which builds all the dtbs regardless of kernel config. This transition could break some scripts if they expect dtb files in the old location. Cc: Ley Foon Tan Cc: nios2-dev@lists.rocketboards.org Signed-off-by: Rob Herring

nios2: Add CDX support

2017-05-08T08:59:19+00:00

Add support for the CDX Code Density Extensions present in Nios II R2 . This introduces new 16bit instruction set to improve code density while retaining support for the 32bit Nios II R2 instructions. Signed-off-by: Marek Vasut Cc: Ley Foon Tan

nios2: Add BMX support

2017-05-08T08:59:19+00:00

Add support for the BMX Bit Manipulation Extensions present in Nios II R2 . This introduces three new instructions, EXTRACT, INSERT and MERGE. Signed-off-by: Marek Vasut Cc: Ley Foon Tan

nios2: Add NIOS2_ARCH_REVISION to select between R1 and R2

2017-05-08T08:59:19+00:00

Allow user to select between Nios2 R1 and R2. Since R1 and R2 are not binary compatible, we cannot have a single kernel binary and there is no point in having DT property for discerning these two. Signed-off-by: Marek Vasut Cc: Ley Foon Tan

nios2: Add order-only DTC dependency to %.dtb target

2016-05-19T01:15:00+00:00

The dtc dependency is missing, thus dtc is not built before it's invoked, resulting in the following problem: linux-2.6$ make 10m50_defconfig && make 10m50_devboard.dtb [...] scripts/kconfig/conf --silentoldconfig Kconfig DTC arch/nios2/boot/10m50_devboard.dtb /bin/sh: 1: ./scripts/dtc/dtc: not found arch/nios2/boot/Makefile:52: recipe for target 'arch/nios2/boot/10m50_devboard.dtb' failed make[1]: *** [arch/nios2/boot/10m50_devboard.dtb] Error 127 arch/nios2/Makefile:57: recipe for target '10m50_devboard.dtb' failed make: *** [10m50_devboard.dtb] Error 2 Signed-off-by: Marek Vasut Cc: Ley Foon Tan Cc: Romain Perier Acked-by: Ley Foon Tan