kernel/git/stable/linux.git/arch/nios2/include, branch linux-5.19.y

nios2: add force_successful_syscall_return()

2022-08-25T09:45:27+00:00

commit fd0c153daad135d0ec1a53c5dbe6936a724d6ae1 upstream. If we use the ancient SysV syscall ABI, we'd better have tell the kernel how to claim that a negative return value is a success. Use ->orig_r2 for that - it's inaccessible via ptrace, so it's a fair game for changes and it's normally[*] non-negative on return from syscall. Set to -1; syscall is not going to be restart-worthy by definition, so we won't interfere with that use either. [*] the only exception is rt_sigreturn(), where we skip the entire messing with r1/r2 anyway. Fixes: 82ed08dd1b0e ("nios2: Exception handling") Signed-off-by: Al Viro Signed-off-by: Dinh Nguyen Signed-off-by: Greg Kroah-Hartman

nios2: page fault et.al. are not restartable syscalls...

2022-08-25T09:45:27+00:00

commit 8535c239ac674f7ead0f2652932d35c52c4123b2 upstream. make sure that ->orig_r2 is negative for everything except the syscalls. Fixes: 82ed08dd1b0e ("nios2: Exception handling") Signed-off-by: Al Viro Signed-off-by: Dinh Nguyen Signed-off-by: Greg Kroah-Hartman

nios2: use fallback for random_get_entropy() instead of zero

2022-05-13T21:59:23+00:00

In the event that random_get_entropy() can't access a cycle counter or similar, falling back to returning 0 is really not the best we can do. Instead, at least calling random_get_entropy_fallback() would be preferable, because that always needs to return _something_, even falling back to jiffies eventually. It's not as though random_get_entropy_fallback() is super high precision or guaranteed to be entropic, but basically anything that's not zero all the time is better than returning zero all the time. Cc: Thomas Gleixner Cc: Arnd Bergmann Acked-by: Dinh Nguyen Signed-off-by: Jason A. Donenfeld

Merge tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

2022-03-24T01:03:08+00:00

Pull asm-generic updates from Arnd Bergmann: "There are three sets of updates for 5.18 in the asm-generic tree: - The set_fs()/get_fs() infrastructure gets removed for good. This was already gone from all major architectures, but now we can finally remove it everywhere, which loses some particularly tricky and error-prone code. There is a small merge conflict against a parisc cleanup, the solution is to use their new version. - The nds32 architecture ends its tenure in the Linux kernel. The hardware is still used and the code is in reasonable shape, but the mainline port is not actively maintained any more, as all remaining users are thought to run vendor kernels that would never be updated to a future release. - A series from Masahiro Yamada cleans up some of the uapi header files to pass the compile-time checks" * tag 'asm-generic-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (27 commits) nds32: Remove the architecture uaccess: remove CONFIG_SET_FS ia64: remove CONFIG_SET_FS support sh: remove CONFIG_SET_FS support sparc64: remove CONFIG_SET_FS support lib/test_lockup: fix kernel pointer check for separate address spaces uaccess: generalize access_ok() uaccess: fix type mismatch warnings from access_ok() arm64: simplify access_ok() m68k: fix access_ok for coldfire MIPS: use simpler access_ok() MIPS: Handle address errors for accesses above CPU max virtual user address uaccess: add generic __{get,put}_kernel_nofault nios2: drop access_ok() check from __put_user() x86: use more conventional access_ok() definition x86: remove __range_not_ok() sparc64: add __{get,put}_kernel_nofault() nds32: fix access_ok() checks in get/put_user uaccess: fix nios2 and microblaze get_user_8() sparc64: fix building assembly files ...

arch: Add pmd_pfn() where it is missing

2022-03-21T16:59:02+00:00

We need to use this function in common code, so define it for architectures and/or configrations that miss it. The result of pmd_pfn() will only be used if TRANSPARENT_HUGEPAGE is enabled, but a function or macro called pmd_pfn() must be defined, even on machines with two level page tables. Signed-off-by: Mike Rapoport Signed-off-by: Matthew Wilcox (Oracle)

uaccess: remove CONFIG_SET_FS

2022-02-25T08:36:06+00:00

There are no remaining callers of set_fs(), so CONFIG_SET_FS can be removed globally, along with the thread_info field and any references to it. This turns access_ok() into a cheaper check against TASK_SIZE_MAX. As CONFIG_SET_FS is now gone, drop all remaining references to set_fs()/get_fs(), mm_segment_t, user_addr_max() and uaccess_kernel(). Acked-by: Sam Ravnborg # for sparc32 changes Acked-by: "Eric W. Biederman" Tested-by: Sergey Matyukevich # for arc changes Acked-by: Stafford Horne # [openrisc, asm-generic] Acked-by: Dinh Nguyen Signed-off-by: Arnd Bergmann

uaccess: generalize access_ok()

2022-02-25T08:36:05+00:00

There are many different ways that access_ok() is defined across architectures, but in the end, they all just compare against the user_addr_max() value or they accept anything. Provide one definition that works for most architectures, checking against TASK_SIZE_MAX for user processes or skipping the check inside of uaccess_kernel() sections. For architectures without CONFIG_SET_FS(), this should be the fastest check, as it comes down to a single comparison of a pointer against a compile-time constant, while the architecture specific versions tend to do something more complex for historic reasons or get something wrong. Type checking for __user annotations is handled inconsistently across architectures, but this is easily simplified as well by using an inline function that takes a 'const void __user *' argument. A handful of callers need an extra __user annotation for this. Some architectures had trick to use 33-bit or 65-bit arithmetic on the addresses to calculate the overflow, however this simpler version uses fewer registers, which means it can produce better object code in the end despite needing a second (statically predicted) branch. Reviewed-by: Christoph Hellwig Acked-by: Mark Rutland [arm64, asm-generic] Acked-by: Geert Uytterhoeven Acked-by: Stafford Horne Acked-by: Dinh Nguyen Signed-off-by: Arnd Bergmann

nios2: drop access_ok() check from __put_user()

2022-02-25T08:36:05+00:00

Unlike other architectures, the nios2 version of __put_user() has an extra check for access_ok(), preventing it from being used to implement __put_kernel_nofault(). Split up put_user() along the same lines as __get_user()/get_user() Reviewed-by: Christoph Hellwig Acked-by: Dinh Nguyen Signed-off-by: Arnd Bergmann

uaccess: fix nios2 and microblaze get_user_8()

2022-02-25T08:36:00+00:00

These two architectures implement 8-byte get_user() through a memcpy() into a four-byte variable, which won't fit. Use a temporary 64-bit variable instead here, and use a double cast the way that risc-v and openrisc do to avoid compile-time warnings. Fixes: 6a090e97972d ("arch/microblaze: support get_user() of size 8 bytes") Fixes: 5ccc6af5e88e ("nios2: Memory management") Reviewed-by: Christoph Hellwig Acked-by: Dinh Nguyen Signed-off-by: Arnd Bergmann

Add linux/cacheflush.h

2021-11-17T15:36:15+00:00

Many architectures do not include asm-generic/cacheflush.h, so turn the includes on their head and add linux/cacheflush.h which includes asm/cacheflush.h. Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h to linux/cacheflush.h and change linux/highmem.h to include linux/cacheflush.h instead of asm/cacheflush.h so that all necessary places will see flush_dcache_folio(). More functions should have their default implementations moved in the future, but those are for follow-on patches. This fixes csky, sparc and sparc64 which were missed in the commit which added flush_dcache_folio(). Fixes: 08b0b0059bf1 ("mm: Add flush_dcache_folio()") Suggested-by: Christoph Hellwig Signed-off-by: Matthew Wilcox (Oracle) Acked-by: Geert Uytterhoeven