kernel/git/stable/linux.git/arch/openrisc, branch linux-5.7.y

openrisc: Fix oops caused when dumping stack

2020-08-21T11:07:39+00:00

[ Upstream commit 57b8e277c33620e115633cdf700a260b55095460 ] When dumping a stack with 'cat /proc/#/stack' the kernel would oops. For example: # cat /proc/690/stack Unable to handle kernel access at virtual address 0x7fc60f58 Oops#: 0000 CPU #: 0 PC: c00097fc SR: 0000807f SP: d6f09b9c GPR00: 00000000 GPR01: d6f09b9c GPR02: d6f09bb8 GPR03: d6f09bc4 GPR04: 7fc60f5c GPR05: c00099b4 GPR06: 00000000 GPR07: d6f09ba3 GPR08: ffffff00 GPR09: c0009804 GPR10: d6f08000 GPR11: 00000000 GPR12: ffffe000 GPR13: dbb86000 GPR14: 00000001 GPR15: dbb86250 GPR16: 7fc60f63 GPR17: 00000f5c GPR18: d6f09bc4 GPR19: 00000000 GPR20: c00099b4 GPR21: ffffffc0 GPR22: 00000000 GPR23: 00000000 GPR24: 00000001 GPR25: 000002c6 GPR26: d78b6850 GPR27: 00000001 GPR28: 00000000 GPR29: dbb86000 GPR30: ffffffff GPR31: dbb862fc RES: 00000000 oGPR11: ffffffff Process cat (pid: 702, stackpage=d79d6000) Stack: Call trace: [<598977f2>] save_stack_trace_tsk+0x40/0x74 [<95063f0e>] stack_trace_save_tsk+0x44/0x58 [] proc_pid_stack+0xd0/0x13c [] proc_single_show+0x6c/0xf0 [] seq_read+0x1b4/0x688 [<2d6c7480>] do_iter_read+0x208/0x248 [<2182a2fb>] vfs_readv+0x64/0x90 This was caused by the stack trace code in save_stack_trace_tsk using the wrong stack pointer. It was using the user stack pointer instead of the kernel stack pointer. Fix this by using the right stack. Also for good measure we add try_get_task_stack/put_task_stack to ensure the task is not lost while we are walking it's stack. Fixes: eecac38b0423a ("openrisc: support framepointers and STACKTRACE_SUPPORT") Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

openrisc: Fix issue with argument clobbering for clone/fork

2020-06-24T15:49:01+00:00

[ Upstream commit 6bd140e14d9aaa734ec37985b8b20a96c0ece948 ] Working on the OpenRISC glibc port I found that sometimes clone was working strange. That the tls data argument sent in r7 was always wrong. Further investigation revealed that the arguments were getting clobbered in the entry code. This patch removes the code that writes to the argument registers. This was likely due to some old code hanging around. This patch fixes this up for clone and fork. This fork clobber is harmless but also useless so remove. Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin

mm/special: create generic fallbacks for pte_special() and pte_mkspecial()

2020-04-10T22:36:21+00:00

Currently there are many platforms that dont enable ARCH_HAS_PTE_SPECIAL but required to define quite similar fallback stubs for special page table entry helpers such as pte_special() and pte_mkspecial(), as they get build in generic MM without a config check. This creates two generic fallback stub definitions for these helpers, eliminating much code duplication. mips platform has a special case where pte_special() and pte_mkspecial() visibility is wider than what ARCH_HAS_PTE_SPECIAL enablement requires. This restricts those symbol visibility in order to avoid redefinitions which is now exposed through this new generic stubs and subsequent build failure. arm platform set_pte_at() definition needs to be moved into a C file just to prevent a build failure. [anshuman.khandual@arm.com: use defined(CONFIG_ARCH_HAS_PTE_SPECIAL) in mips per Thomas] Link: http://lkml.kernel.org/r/1583851924-21603-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual Signed-off-by: Andrew Morton Acked-by: Guo Ren [csky] Acked-by: Geert Uytterhoeven [m68k] Acked-by: Stafford Horne [openrisc] Acked-by: Helge Deller [parisc] Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Russell King Cc: Brian Cain Cc: Tony Luck Cc: Fenghua Yu Cc: Sam Creasey Cc: Michal Simek Cc: Ralf Baechle Cc: Paul Burton Cc: Nick Hu Cc: Greentime Hu Cc: Vincent Chen Cc: Ley Foon Tan Cc: Jonas Bonn Cc: Stefan Kristiansson Cc: "James E.J. Bottomley" Cc: "David S. Miller" Cc: Jeff Dike Cc: Richard Weinberger Cc: Anton Ivanov Cc: Guan Xuetao Cc: Chris Zankel Cc: Max Filippov Cc: Thomas Bogendoerfer Link: http://lkml.kernel.org/r/1583802551-15406-1-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds

mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS

2020-04-10T22:36:21+00:00

There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual Signed-off-by: Andrew Morton Reviewed-by: Vlastimil Babka Acked-by: Geert Uytterhoeven Cc: Richard Henderson Cc: Vineet Gupta Cc: Russell King Cc: Catalin Marinas Cc: Mark Salter Cc: Guo Ren Cc: Yoshinori Sato Cc: Brian Cain Cc: Tony Luck Cc: Michal Simek Cc: Ralf Baechle Cc: Paul Burton Cc: Nick Hu Cc: Ley Foon Tan Cc: Jonas Bonn Cc: "James E.J. Bottomley" Cc: Michael Ellerman Cc: Paul Walmsley Cc: Heiko Carstens Cc: Rich Felker Cc: "David S. Miller" Cc: Guan Xuetao Cc: Thomas Gleixner Cc: Jeff Dike Cc: Chris Zankel Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds

Merge tag 'for-linus' of git://github.com/openrisc/linux

2020-04-07T19:33:37+00:00

Pull OpenRISC updates from Stafford Horne: "A few cleanups all over the place, things of note: - Enable the clone3 syscall - Remove CONFIG_CROSS_COMPILE from Krzysztof Kozlowski - Update to use mmgrab from Julia Lawall" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Remove obsolete show_trace_task function openrisc: Cleanup copy_thread_tls docs and comments openrisc: Enable the clone3 syscall openrisc: Convert copy_thread to copy_thread_tls openrisc: use mmgrab openrisc: configs: Cleanup CONFIG_CROSS_COMPILE

Merge tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping

2020-04-04T17:12:47+00:00

Pull dma-mapping updates from Christoph Hellwig: - fix an integer overflow in the coherent pool (Kevin Grandemange) - provide support for in-place uncached remapping and use that for openrisc - fix the arm coherent allocator to take the bus limit into account * tag 'dma-mapping-5.7' of git://git.infradead.org/users/hch/dma-mapping: ARM/dma-mapping: merge __dma_supported into arm_dma_supported ARM/dma-mapping: take the bus limit into account in __dma_alloc ARM/dma-mapping: remove get_coherent_dma_mask openrisc: use the generic in-place uncached DMA allocator dma-direct: provide a arch_dma_clear_uncached hook dma-direct: make uncached_kernel_address more general dma-direct: consolidate the error handling in dma_direct_alloc_pages dma-direct: remove the cached_kernel_address hook dma-coherent: fix integer overflow in the reserved-memory dma allocation

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2020-04-03T20:12:26+00:00

Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments

mm: allow VM_FAULT_RETRY for multiple times

2020-04-02T16:35:30+00:00

The idea comes from a discussion between Linus and Andrea [1]. Before this patch we only allow a page fault to retry once. We achieved this by clearing the FAULT_FLAG_ALLOW_RETRY flag when doing handle_mm_fault() the second time. This was majorly used to avoid unexpected starvation of the system by looping over forever to handle the page fault on a single page. However that should hardly happen, and after all for each code path to return a VM_FAULT_RETRY we'll first wait for a condition (during which time we should possibly yield the cpu) to happen before VM_FAULT_RETRY is really returned. This patch removes the restriction by keeping the FAULT_FLAG_ALLOW_RETRY flag when we receive VM_FAULT_RETRY. It means that the page fault handler now can retry the page fault for multiple times if necessary without the need to generate another page fault event. Meanwhile we still keep the FAULT_FLAG_TRIED flag so page fault handler can still identify whether a page fault is the first attempt or not. Then we'll have these combinations of fault flags (only considering ALLOW_RETRY flag and TRIED flag): - ALLOW_RETRY and !TRIED: this means the page fault allows to retry, and this is the first try - ALLOW_RETRY and TRIED: this means the page fault allows to retry, and this is not the first try - !ALLOW_RETRY and !TRIED: this means the page fault does not allow to retry at all - !ALLOW_RETRY and TRIED: this is forbidden and should never be used In existing code we have multiple places that has taken special care of the first condition above by checking against (fault_flags & FAULT_FLAG_ALLOW_RETRY). This patch introduces a simple helper to detect the first retry of a page fault by checking against both (fault_flags & FAULT_FLAG_ALLOW_RETRY) and !(fault_flag & FAULT_FLAG_TRIED) because now even the 2nd try will have the ALLOW_RETRY set, then use that helper in all existing special paths. One example is in __lock_page_or_retry(), now we'll drop the mmap_sem only in the first attempt of page fault and we'll keep it in follow up retries, so old locking behavior will be retained. This will be a nice enhancement for current code [2] at the same time a supporting material for the future userfaultfd-writeprotect work, since in that work there will always be an explicit userfault writeprotect retry for protected pages, and if that cannot resolve the page fault (e.g., when userfaultfd-writeprotect is used in conjunction with swapped pages) then we'll possibly need a 3rd retry of the page fault. It might also benefit other potential users who will have similar requirement like userfault write-protection. GUP code is not touched yet and will be covered in follow up patch. Please read the thread below for more information. [1] https://lore.kernel.org/lkml/20171102193644.GB22686@redhat.com/ [2] https://lore.kernel.org/lkml/20181230154648.GB9832@redhat.com/ Suggested-by: Linus Torvalds Suggested-by: Andrea Arcangeli Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Tested-by: Brian Geffon Cc: Bobby Powers Cc: David Hildenbrand Cc: Denis Plotnikov Cc: "Dr . David Alan Gilbert" Cc: Hugh Dickins Cc: Jerome Glisse Cc: Johannes Weiner Cc: "Kirill A . Shutemov" Cc: Martin Cracauer Cc: Marty McFadden Cc: Matthew Wilcox Cc: Maya Gokhale Cc: Mel Gorman Cc: Mike Kravetz Cc: Mike Rapoport Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/20200220160246.9790-1-peterx@redhat.com Signed-off-by: Linus Torvalds

mm: introduce FAULT_FLAG_DEFAULT

2020-04-02T16:35:29+00:00

Although there're tons of arch-specific page fault handlers, most of them are still sharing the same initial value of the page fault flags. Say, merely all of the page fault handlers would allow the fault to be retried, and they also allow the fault to respond to SIGKILL. Let's define a default value for the fault flags to replace those initial page fault flags that were copied over. With this, it'll be far easier to introduce new fault flag that can be used by all the architectures instead of touching all the archs. Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Tested-by: Brian Geffon Reviewed-by: David Hildenbrand Cc: Andrea Arcangeli Cc: Bobby Powers Cc: Denis Plotnikov Cc: "Dr . David Alan Gilbert" Cc: Hugh Dickins Cc: Jerome Glisse Cc: Johannes Weiner Cc: "Kirill A . Shutemov" Cc: Martin Cracauer Cc: Marty McFadden Cc: Matthew Wilcox Cc: Maya Gokhale Cc: Mel Gorman Cc: Mike Kravetz Cc: Mike Rapoport Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/20200220160238.9694-1-peterx@redhat.com Signed-off-by: Linus Torvalds

mm: introduce fault_signal_pending()

2020-04-02T16:35:29+00:00

For most architectures, we've got a quick path to detect fatal signal after a handle_mm_fault(). Introduce a helper for that quick path. It cleans the current codes a bit so we don't need to duplicate the same check across archs. More importantly, this will be an unified place that we handle the signal immediately right after an interrupted page fault, so it'll be much easier for us if we want to change the behavior of handling signals later on for all the archs. Note that currently only part of the archs are using this new helper, because some archs have their own way to handle signals. In the follow up patches, we'll try to apply this helper to all the rest of archs. Another note is that the "regs" parameter in the new helper is not used yet. It'll be used very soon. Now we kept it in this patch only to avoid touching all the archs again in the follow up patches. [peterx@redhat.com: fix sparse warnings] Link: http://lkml.kernel.org/r/20200311145921.GD479302@xz-x1 Signed-off-by: Peter Xu Signed-off-by: Andrew Morton Tested-by: Brian Geffon Cc: Andrea Arcangeli Cc: Bobby Powers Cc: David Hildenbrand Cc: Denis Plotnikov Cc: "Dr . David Alan Gilbert" Cc: Hugh Dickins Cc: Jerome Glisse Cc: Johannes Weiner Cc: "Kirill A . Shutemov" Cc: Martin Cracauer Cc: Marty McFadden Cc: Matthew Wilcox Cc: Maya Gokhale Cc: Mel Gorman Cc: Mike Kravetz Cc: Mike Rapoport Cc: Pavel Emelyanov Link: http://lkml.kernel.org/r/20200220155353.8676-4-peterx@redhat.com Signed-off-by: Linus Torvalds