kernel/git/stable/linux.git/arch/powerpc/Makefile, branch linux-6.0.y

powerpc/64s: Fix GENERIC_CPU build flags for PPC970 / G5

2022-10-21T10:38:57+00:00

[ Upstream commit 58ec7f06b74e0d6e76c4110afce367c8b5f0837d ] Big-endian GENERIC_CPU supports 970, but builds with -mcpu=power5. POWER5 is ISA v2.02 whereas 970 is v2.01 plus Altivec. 2.02 added the popcntb instruction which a compiler might use. Use -mcpu=power4. Fixes: 471d7ff8b51b ("powerpc/64s: Remove POWER4 support") Signed-off-by: Nicholas Piggin Reviewed-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220921014103.587954-1-npiggin@gmail.com Signed-off-by: Sasha Levin

powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei')

2022-07-27T11:36:06+00:00

With GCC 12, corenet64_smp_defconfig leads to the following build errors: CC arch/powerpc/kernel/irq.o {standard input}: Assembler messages: {standard input}:3616: Error: unrecognized opcode: `wrteei' {standard input}:5689: Error: unrecognized opcode: `wrteei' CC arch/powerpc/kernel/pmc.o {standard input}: Assembler messages: {standard input}:42: Error: unrecognized opcode: `mfpmr' {standard input}:53: Error: unrecognized opcode: `mtpmr' CC arch/powerpc/kernel/io.o {standard input}: Assembler messages: {standard input}:376: Error: unrecognized opcode: `mbar' ... CC arch/powerpc/mm/nohash/book3e_hugetlbpage.o {standard input}: Assembler messages: {standard input}:291: Error: unrecognized opcode: `tlbsx' {standard input}:482: Error: unrecognized opcode: `tlbwe' {standard input}:608: Error: unrecognized opcode: `lbarx' {standard input}:608: Error: unrecognized opcode: `stbcx.' -mpcu=powerpc64 cannot be used anymore for book3e, it must be a booke CPU. But then we get: CC arch/powerpc/lib/xor_vmx.o cc1: error: AltiVec not supported in this target Altivec is not supported with -mcpu=e5500 so don't allow selection of altivec when e5500 is selected. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/77255a5a957967723b84d0356d9e5fb21569f4e8.1657549153.git.christophe.leroy@csgroup.eu

powerpc/32: Don't always pass -mcpu=powerpc to the compiler

2022-07-27T11:36:06+00:00

Since commit 4bf4f42a2feb ("powerpc/kbuild: Set default generic machine type for 32-bit compile"), when building a 32 bits kernel with a bi-arch version of GCC, or when building a book3s/32 kernel, the option -mcpu=powerpc is passed to GCC at all time, relying on it being eventually overriden by a subsequent -mcpu=xxxx. But when building the same kernel with a 32 bits only version of GCC, that is not done, relying on gcc being built with the expected default CPU. This logic has two problems. First, it is a bit fragile to rely on whether the GCC version is bi-arch or not, because today we can have bi-arch versions of GCC configured with a 32 bits default. Second, there are some versions of GCC which don't support -mcpu=powerpc, for instance for e500 SPE-only versions. So, stop relying on this approximative logic and allow the user to decide whether he/she wants to use the toolchain's default CPU or if he/she wants to set one, and allow only possible CPUs based on the selected target. Reported-by: Pali Rohár Signed-off-by: Christophe Leroy Tested-by: Pali Rohár Reviewed-by: Arnd Bergmann Reviewed-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu

Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2022-05-28T18:27:17+00:00

Pull powerpc updates from Michael Ellerman: - Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT) - Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later) - Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ - Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later - Drop support for system call instruction emulation - Many other small features and fixes Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai, Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes, Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras, Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing, Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng. * tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits) powerpc/64: Include cache.h directly in paca.h powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set powerpc/xics: Include missing header powerpc/powernv/pci: Drop VF MPS fixup powerpc/fsl_book3e: Don't set rodata RO too early powerpc/microwatt: Add mmu bits to device tree powerpc/powernv/flash: Check OPAL flash calls exist before using powerpc/powermac: constify device_node in of_irq_parse_oldworld() powerpc/powermac: add missing g5_phy_disable_cpu1() declaration selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch" powerpc: Enable the DAWR on POWER9 DD2.3 and above powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask powerpc: Fix all occurences of "the the" selftests/powerpc/pmu/ebb: remove fixed_instruction.S powerpc/platforms/83xx: Use of_device_get_match_data() powerpc/eeh: Drop redundant spinlock initialization powerpc/iommu: Add missing of_node_put in iommu_init_early_dart powerpc/pseries/vas: Call misc_deregister if sysfs init fails powerpc/papr_scm: Fix leaking nvdimm_events_map elements ...

powerpc: Finalise cleanup around ABI use

2022-05-19T13:11:29+00:00

Now that we have CONFIG_PPC64_ELF_ABI_V1 and CONFIG_PPC64_ELF_ABI_V2, get rid of all indirect detection of ABI version. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/709d9d69523c14c8a9fba4486395dca0f2d675b1.1652074503.git.christophe.leroy@csgroup.eu

powerpc: Add CONFIG_PPC64_ELF_ABI_V1 and CONFIG_PPC64_ELF_ABI_V2

2022-05-19T13:11:28+00:00

At the time being, we use CONFIG_CPU_LITTLE_ENDIAN and CONFIG_CPU_BIG_ENDIAN to pass -mabi=elfv1 or elfv2 to compiler, then define a PPC64_ELF_ABI_v1 or PPC64_ELF_ABI_v2 macro in asm/types.h based on _CALL_ELF define set by the compiler. Make it more straight forward with a CONFIG option that is directly usable. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/1eca1addbc550167da9841c7340a010d0c4b2200.1652074503.git.christophe.leroy@csgroup.eu

kbuild: factor out the common installation code into scripts/install.sh

2022-05-11T12:45:53+00:00

Many architectures have similar install.sh scripts. The first half is really generic; it verifies that the kernel image and System.map exist, then executes ~/bin/${INSTALLKERNEL} or /sbin/${INSTALLKERNEL} if available. The second half is kind of arch-specific; it copies the kernel image and System.map to the destination, but the code is slightly different. Factor out the generic part into scripts/install.sh. Signed-off-by: Masahiro Yamada Reviewed-by: Nicolas Schier

Merge branch 'topic/func-desc-lkdtm' into next

2022-03-07T12:34:32+00:00

Merge a topic branch we are maintaining with some cross-architecture changes to function descriptor handling and their use in LKDTM. From Christophe's cover letter: Fix LKDTM for PPC64/IA64/PARISC PPC64/IA64/PARISC have function descriptors. LKDTM doesn't work on those three architectures because LKDTM messes up function descriptors with functions. This series does some cleanup in the three architectures and refactors function descriptors so that it can then easily use it in a generic way in LKDTM.

powerpc/Makefile: Don't pass -mcpu=powerpc64 when building 32-bit

2022-03-01T12:51:04+00:00

When CONFIG_GENERIC_CPU=y (true for all our defconfigs) we pass -mcpu=powerpc64 to the compiler, even when we're building a 32-bit kernel. This happens because we have an ifdef CONFIG_PPC_BOOK3S_64/else block in the Makefile that was written before 32-bit supported GENERIC_CPU. Prior to that the else block only applied to 64-bit Book3E. The GCC man page says -mcpu=powerpc64 "[specifies] a pure ... 64-bit big endian PowerPC ... architecture machine [type], with an appropriate, generic processor model assumed for scheduling purposes." It's unclear how that interacts with -m32, which we are also passing, although obviously -m32 is taking precedence in some sense, as the 32-bit kernel only contains 32-bit instructions. This was noticed by inspection, not via any bug reports, but it does affect code generation. Comparing before/after code generation, there are some changes to instruction scheduling, and the after case (with -mcpu=powerpc64 removed) the compiler seems more keen to use r8. Fix it by making the else case only apply to Book3E 64, which excludes 32-bit. Fixes: 0e00a8c9fd92 ("powerpc: Allow CPU selection also on PPC32") Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220215112858.304779-1-mpe@ellerman.id.au

powerpc: Fix 'sparse' checking on PPC64le

2022-02-16T12:25:10+00:00

'sparse' is architecture agnostic and knows nothing about ELF ABI version. Just like it gets arch and powerpc type and endian from Makefile, it also need to get _CALL_ELF from there, otherwise it won't set PPC64_ELF_ABI_v2 macro for PPC64le and won't check the correct code. Signed-off-by: Christophe Leroy Reviewed-by: Kees Cook Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/ac1312f2451aa558bb2a8806b4d0aa2020f0c176.1644928018.git.christophe.leroy@csgroup.eu