kernel/git/stable/linux.git/arch/powerpc/include, branch linux-5.19.y

powerpc: Fix fallocate and fadvise64_64 compat parameter combination

2022-10-24T07:58:03+00:00

[ Upstream commit 016ff72bd2090903715c0f9422a44afbb966f4ee ] As reported[1] by Arnd, the arch-specific fadvise64_64 and fallocate compatibility handlers assume parameters are passed with 32-bit big-endian ABI. This affects the assignment of odd-even parameter pairs to the high or low words of a 64-bit syscall parameter. Fix fadvise64_64 fallocate compat handlers to correctly swap upper/lower 32 bits conditioned on endianness. A future patch will replace the arch-specific compat fallocate with an asm-generic implementation. This patch is intended for ease of back-port. [1]: https://lore.kernel.org/all/be29926f-226e-48dc-871a-e29a54e80583@www.fastmail.com/ Fixes: 57f48b4b74e7 ("powerpc/compat_sys: swap hi/lo parts of 64-bit syscall args in LE mode") Reported-by: Arnd Bergmann Signed-off-by: Rohan McLure Reviewed-by: Arnd Bergmann Reviewed-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220921065605.1051927-9-rmclure@linux.ibm.com Signed-off-by: Sasha Levin

Revert "powerpc/rtas: Implement reentrant rtas call"

2022-10-15T06:01:43+00:00

commit f88aabad33ea22be2ce1c60d8901942e4e2a9edb upstream. At the time this was submitted by Leonardo, I confirmed -- or thought I had confirmed -- with PowerVM partition firmware development that the following RTAS functions: - ibm,get-xive - ibm,int-off - ibm,int-on - ibm,set-xive were safe to call on multiple CPUs simultaneously, not only with respect to themselves as indicated by PAPR, but with arbitrary other RTAS calls: https://lore.kernel.org/linuxppc-dev/875zcy2v8o.fsf@linux.ibm.com/ Recent discussion with firmware development makes it clear that this is not true, and that the code in commit b664db8e3f97 ("powerpc/rtas: Implement reentrant rtas call") is unsafe, likely explaining several strange bugs we've seen in internal testing involving DLPAR and LPM. These scenarios use ibm,configure-connector, whose internal state can be corrupted by the concurrent use of the "reentrant" functions, leading to symptoms like endless busy statuses from RTAS. Fixes: b664db8e3f97 ("powerpc/rtas: Implement reentrant rtas call") Cc: stable@vger.kernel.org # v5.8+ Signed-off-by: Nathan Lynch Reviewed-by: Laurent Dufour Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220907220111.223267-1-nathanl@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

Revert "powerpc: Remove unused FW_FEATURE_NATIVE references"

2022-09-08T09:24:01+00:00

commit 310d1344e3c58cc2d625aa4e52cfcb7d8a26fcbf upstream. This reverts commit 79b74a68486765a4fe685ac4069bc71366c538f5. It broke booting on IBM Cell machines when the kernel is also built with CONFIG_PPC_PS3=y. That's because FW_FEATURE_NATIVE_ALWAYS = 0 does have an important effect, which is to clear the PS3 ALWAYS features from FW_FEATURE_ALWAYS. Note that CONFIG_PPC_NATIVE has since been renamed CONFIG_PPC_HASH_MMU_NATIVE. Fixes: 79b74a684867 ("powerpc: Remove unused FW_FEATURE_NATIVE references") Cc: stable@vger.kernel.org # v5.17+ Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220823115952.1203106-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman

powerpc/watchdog: introduce a NMI watchdog's factor

2022-08-25T09:45:51+00:00

[ Upstream commit f5e74e836097d1004077390717d4bd95d4a2c27a ] Introduce a factor which would apply to the NMI watchdog timeout. This factor is a percentage added to the watchdog_tresh value. The value is set under the watchdog_mutex protection and lockup_detector_reconfigure() is called to recompute wd_panic_timeout_tb. Once the factor is set, it remains until it is set back to 0, which means no impact. Signed-off-by: Laurent Dufour Reviewed-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220713154729.80789-4-ldufour@linux.ibm.com Signed-off-by: Sasha Levin

powerpc: Fix eh field when calling lwarx on PPC32

2022-08-17T13:16:18+00:00

commit 18db466a9a306406dab3b134014d9f6ed642471c upstream. Commit 9401f4e46cf6 ("powerpc: Use lwarx/ldarx directly instead of PPC_LWARX/LDARX macros") properly handled the eh field of lwarx in asm/bitops.h but failed to clear it for PPC32 in asm/simple_spinlock.h So, do as in arch_atomic_try_cmpxchg_lock(), set it to 1 if PPC64 but set it to 0 if PPC32. For that use IS_ENABLED(CONFIG_PPC64) which returns 1 when CONFIG_PPC64 is set and 0 otherwise. Fixes: 9401f4e46cf6 ("powerpc: Use lwarx/ldarx directly instead of PPC_LWARX/LDARX macros") Cc: stable@vger.kernel.org # v5.15+ Reported-by: Pali Rohár Signed-off-by: Christophe Leroy Tested-by: Pali Rohár Reviewed-by: Segher Boessenkool [mpe: Use symbolic names, use 'n' constraint per Segher] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/a1176e19e627dd6a1b8d24c6c457a8ab874b7d12.1659430931.git.christophe.leroy@csgroup.eu Signed-off-by: Greg Kroah-Hartman

powerpc/powernv/kvm: Use darn for H_RANDOM on Power9

2022-08-17T13:16:13+00:00

[ Upstream commit 7ef3d06f1bc4a5e62273726f3dc2bd258ae1c71f ] The existing logic in KVM to support guests calling H_RANDOM only works on Power8, because it looks for an RNG in the device tree, but on Power9 we just use darn. In addition the existing code needs to work in real mode, so we have the special cased powernv_get_random_real_mode() to deal with that. Instead just have KVM call ppc_md.get_random_seed(), and do the real mode check inside of there, that way we use whatever RNG is available, including darn on Power9. Fixes: e928e9cb3601 ("KVM: PPC: Book3S HV: Add fast real-mode H_RANDOM implementation.") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Jason A. Donenfeld Tested-by: Sachin Sant [mpe: Rebase on previous commit, update change log appropriately] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220727143219.2684192-2-mpe@ellerman.id.au Signed-off-by: Sasha Levin

kexec_file: drop weak attribute from functions

2022-08-17T13:16:08+00:00

[ Upstream commit 65d9a9a60fd71be964effb2e94747a6acb6e7015 ] As requested (http://lkml.kernel.org/r/87ee0q7b92.fsf@email.froward.int.ebiederm.org), this series converts weak functions in kexec to use the #ifdef approach. Quoting the 3e35142ef99fe ("kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]") changelog: : Since commit d1bcae833b32f1 ("ELF: Don't generate unused section symbols") : [1], binutils (v2.36+) started dropping section symbols that it thought : were unused. This isn't an issue in general, but with kexec_file.c, gcc : is placing kexec_arch_apply_relocations[_add] into a separate : .text.unlikely section and the section symbol ".text.unlikely" is being : dropped. Due to this, recordmcount is unable to find a non-weak symbol in : .text.unlikely to generate a relocation record against. This patch (of 2); Drop __weak attribute from functions in kexec_file.c: - arch_kexec_kernel_image_probe() - arch_kimage_file_post_load_cleanup() - arch_kexec_kernel_image_load() - arch_kexec_locate_mem_hole() - arch_kexec_kernel_verify_sig() arch_kexec_kernel_image_load() calls into kexec_image_load_default(), so drop the static attribute for the latter. arch_kexec_kernel_verify_sig() is not overridden by any architecture, so drop the __weak attribute. Link: https://lkml.kernel.org/r/cover.1656659357.git.naveen.n.rao@linux.vnet.ibm.com Link: https://lkml.kernel.org/r/2cd7ca1fe4d6bb6ca38e3283c717878388ed6788.1656659357.git.naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Naveen N. Rao Suggested-by: Eric Biederman Signed-off-by: Andrew Morton Signed-off-by: Mimi Zohar Signed-off-by: Sasha Levin

mmu_gather: Remove per arch tlb_{start,end}_vma()

2022-07-21T17:50:13+00:00

Scattered across the archs are 3 basic forms of tlb_{start,end}_vma(). Provide two new MMU_GATHER_knobs to enumerate them and remove the per arch tlb_{start,end}_vma() implementations. - MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range() but does *NOT* want to call it for each VMA. - MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the invalidate across multiple VMAs if possible. With these it is possible to capture the three forms: 1) empty stubs; select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS 2) start: flush_cache_range(), end: empty; select MMU_GATHER_MERGE_VMAS 3) start: flush_cache_range(), end: flush_tlb_range(); default Obviously, if the architecture does not have flush_cache_range() then it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE. Signed-off-by: Peter Zijlstra (Intel) Acked-by: Will Deacon Cc: David Miller Signed-off-by: Linus Torvalds

powerpc/bpf: Fix use of user_pt_regs in uapi

2022-06-29T10:43:04+00:00

Trying to build a .c file that includes : $ cat test_bpf_headers.c #include throws the below error: /usr/include/linux/bpf_perf_event.h:14:28: error: field ‘regs’ has incomplete type 14 | bpf_user_pt_regs_t regs; | ^~~~ This is because we typedef bpf_user_pt_regs_t to 'struct user_pt_regs' in arch/powerpc/include/uaps/asm/bpf_perf_event.h, but 'struct user_pt_regs' is not exposed to userspace. Powerpc has both pt_regs and user_pt_regs structures. However, unlike arm64 and s390, we expose user_pt_regs to userspace as just 'pt_regs'. As such, we should typedef bpf_user_pt_regs_t to 'struct pt_regs' for userspace. Within the kernel though, we want to typedef bpf_user_pt_regs_t to 'struct user_pt_regs'. Remove arch/powerpc/include/uapi/asm/bpf_perf_event.h so that the uapi/asm-generic version of the header is exposed to userspace. Introduce arch/powerpc/include/asm/bpf_perf_event.h so that we can typedef bpf_user_pt_regs_t to 'struct user_pt_regs' for use within the kernel. Note that this was not showing up with the bpf selftest build since tools/include/uapi/asm/bpf_perf_event.h didn't include the powerpc variant. Fixes: a6460b03f945ee ("powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Naveen N. Rao [mpe: Use typical naming for header include guard] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220627191119.142867-1-naveen.n.rao@linux.vnet.ibm.com

Merge tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2022-06-09T19:17:43+00:00

Pull powerpc fixes from Michael Ellerman: - On 32-bit fix overread/overwrite of thread_struct via ptrace PEEK/POKE. - Fix softirqs not switching to the softirq stack since we moved irq_exit(). - Force thread size increase when KASAN is enabled to avoid stack overflows. - On Book3s 64 mark more code as not to be instrumented by KASAN to avoid crashes. - Exempt __get_wchan() from KASAN checking, as it's inherently racy. - Fix a recently introduced crash in the papr_scm driver in some configurations. - Remove include of which is forbidden. Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner, He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras, Sachin Sant, Vaibhav Jain, and Wanming Hu. * tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/32: Fix overread/overwrite of thread_struct via ptrace powerpc/book3e: get rid of #include powerpc/kasan: Force thread size increase with KASAN powerpc/papr_scm: don't requests stats with '0' sized stats buffer powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK powerpc/kasan: Silence KASAN warnings in __get_wchan() powerpc/kasan: Mark more real-mode code as not to be instrumented