kernel/git/stable/linux.git/arch/powerpc/perf, branch linux-5.10.y

powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks

2024-03-26T22:21:59+00:00

[ Upstream commit ad86d7ee43b22aa2ed60fb982ae94b285c1be671 ] Running event hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ in one of the system throws below error: ---Logs--- # perf list | grep hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=?/[Kernel PMU event] # perf stat -v -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2 Using CPUID 00800200 Control descriptor is not initialized Warning: hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event is not supported by the kernel. failed to read counter hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ Performance counter stats for 'system wide': hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ 2.000700771 seconds time elapsed The above error is because of the hcall failure as required permission "Enable Performance Information Collection" is not set. Based on current code, single_gpci_request function did not check the error type incase hcall fails and by default returns EINVAL. But we can have other reasons for hcall failures like H_AUTHORITY/H_PARAMETER with detail_rc as GEN_BUF_TOO_SMALL, for which we need to act accordingly. Fix this issue by adding new checks in the single_gpci_request and h_gpci_event_init functions. Result after fix patch changes: # perf stat -e hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ sleep 2 Error: No permission to enable hv_gpci/dispatch_timebase_by_processor_processor_time_in_timebase_cycles,phys_processor_idx=0/ event. Fixes: 220a0c609ad1 ("powerpc/perf: Add support for the hv gpci (get performance counter info) interface") Reported-by: Akanksha J N Signed-off-by: Kajol Jain Signed-off-by: Michael Ellerman Link: https://msgid.link/20240229122847.101162-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin

powerpc/imc-pmu: Add a null pointer check in update_events_in_group()

2024-01-25T22:37:40+00:00

[ Upstream commit 0a233867a39078ebb0f575e2948593bbff5826b3 ] kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: 885dcd709ba9 ("powerpc/perf: Add nest IMC PMU support") Signed-off-by: Kunwu Chan Signed-off-by: Michael Ellerman Link: https://msgid.link/20231126093719.1440305-1-chentao@kylinos.cn Signed-off-by: Sasha Levin

powerpc/perf: Fix disabling BHRB and instruction sampling

2023-11-28T16:54:55+00:00

commit ea142e590aec55ba40c5affb4d49e68c713c63dc upstream. When the PMU is disabled, MMCRA is not updated to disable BHRB and instruction sampling. This can lead to those features remaining enabled, which can slow down a real or emulated CPU. Fixes: 1cade527f6e9 ("powerpc/perf: BHRB control to disable BHRB logic when not used") Cc: stable@vger.kernel.org # v5.9+ Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://msgid.link/20231018153423.298373-1-npiggin@gmail.com Signed-off-by: Greg Kroah-Hartman

powerpc/imc-pmu: Use the correct spinlock initializer.

2023-11-20T10:06:53+00:00

[ Upstream commit 007240d59c11f87ac4f6cfc6a1d116630b6b634c ] The macro __SPIN_LOCK_INITIALIZER() is implementation specific. Users that desire to initialize a spinlock in a struct must use __SPIN_LOCK_UNLOCKED(). Use __SPIN_LOCK_UNLOCKED() for the spinlock_t in imc_global_refc. Fixes: 76d588dddc459 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section") Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Michael Ellerman Link: https://msgid.link/20230309134831.Nz12nqsU@linutronix.de Signed-off-by: Sasha Levin

powerpc/perf/hv-24x7: Update domain value check

2023-10-10T19:53:27+00:00

[ Upstream commit 4ff3ba4db5943cac1045e3e4a3c0463ea10f6930 ] Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But the check for domain value 0 is missing. Fix this issue by adding check for domain value 0. Before: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Error: The sys_perf_event_open() syscall returned with 5 (Input/output error) for event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/). /bin/dmesg | grep -i perf may provide additional information. Result from dmesg: [ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret 0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0 After: # ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1 Using CPUID 00800200 Control descriptor is not initialized Warning: hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel. failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements") Reported-by: Krishan Gopal Sarawast Signed-off-by: Kajol Jain Tested-by: Disha Goel Signed-off-by: Michael Ellerman Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin

powerpc/perf: Convert fsl_emb notifier to state machine callbacks

2023-09-19T10:20:15+00:00

[ Upstream commit 34daf445f82bd3a4df852bb5f1dffd792ac830a0 ] CC arch/powerpc/perf/core-fsl-emb.o arch/powerpc/perf/core-fsl-emb.c:675:6: error: no previous prototype for 'hw_perf_event_setup' [-Werror=missing-prototypes] 675 | void hw_perf_event_setup(int cpu) | ^~~~~~~~~~~~~~~~~~~ Looks like fsl_emb was completely missed by commit 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks") So, apply same changes as commit 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks") then commit 57ecde42cc74 ("powerpc/perf: Convert book3s notifier to state machine callbacks") While at it, also fix following error: arch/powerpc/perf/core-fsl-emb.c: In function 'perf_event_interrupt': arch/powerpc/perf/core-fsl-emb.c:648:13: error: variable 'found' set but not used [-Werror=unused-but-set-variable] 648 | int found = 0; | ^~~~~ Fixes: 3f6da3905398 ("perf: Rework and fix the arch CPU-hotplug hooks") Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://msgid.link/603e1facb32608f88f40b7d7b9094adc50e7b2dc.1692349125.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin

powerpc/perf/hv-24x7: add missing RTAS retry status handling

2023-03-11T15:39:44+00:00

[ Upstream commit cc4b26eab1859fa1a70711872caaf6414809973f ] The ibm,get-system-parameter RTAS function may return -2 or 990x, which indicate that the caller should try again. read_24x7_sys_info() ignores this, allowing transient failures in reporting processor module information. Move the RTAS call into a coventional rtas_busy_delay()-based loop, along with the parsing of results on success. Signed-off-by: Nathan Lynch Fixes: 8ba214267382 ("powerpc/hv-24x7: Add rtas call in hv-24x7 driver to get processor details") Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20230125-b4-powerpc-rtas-queue-v3-2-26929c8cce78@linux.ibm.com Signed-off-by: Sasha Levin

powerpc/imc-pmu: Revert nest_init_lock to being a mutex

2023-02-15T16:22:10+00:00

commit ad53db4acb415976761d7302f5b02e97f2bd097e upstream. The recent commit 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section") fixed warnings (and possible deadlocks) in the IMC PMU driver by converting the locking to use spinlocks. It also converted the init-time nest_init_lock to a spinlock, even though it's not used at runtime in IRQ disabled sections or while holding other spinlocks. This leads to warnings such as: BUG: sleeping function called from invalid context at include/linux/percpu-rwsem.h:49 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.2.0-rc2-14719-gf12cd06109f4-dirty #1 Hardware name: Mambo,Simulated-System POWER9 0x4e1203 opal:v6.6.6 PowerNV Call Trace: dump_stack_lvl+0x74/0xa8 (unreliable) __might_resched+0x178/0x1a0 __cpuhp_setup_state+0x64/0x1e0 init_imc_pmu+0xe48/0x1250 opal_imc_counters_probe+0x30c/0x6a0 platform_probe+0x78/0x110 really_probe+0x104/0x420 __driver_probe_device+0xb0/0x170 driver_probe_device+0x58/0x180 __driver_attach+0xd8/0x250 bus_for_each_dev+0xb4/0x140 driver_attach+0x34/0x50 bus_add_driver+0x1e8/0x2d0 driver_register+0xb4/0x1c0 __platform_driver_register+0x38/0x50 opal_imc_driver_init+0x2c/0x40 do_one_initcall+0x80/0x360 kernel_init_freeable+0x310/0x3b8 kernel_init+0x30/0x1a0 ret_from_kernel_thread+0x5c/0x64 Fix it by converting nest_init_lock back to a mutex, so that we can call sleeping functions while holding it. There is no interaction between nest_init_lock and the runtime spinlocks used by the actual PMU routines. Fixes: 76d588dddc45 ("powerpc/imc-pmu: Fix use of mutex in IRQs disabled section") Tested-by: Kajol Jain Reviewed-by: Kajol Jain Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20230130014401.540543-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman

powerpc/imc-pmu: Fix use of mutex in IRQs disabled section

2023-01-18T10:44:58+00:00

commit 76d588dddc459fefa1da96e0a081a397c5c8e216 upstream. Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event. Command to trigger the warning: # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5 Performance counter stats for 'sleep 5': 0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ 5.002117947 seconds time elapsed 0.000131000 seconds user 0.001063000 seconds sys Below is snippet of the warning in dmesg: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec preempt_count: 2, expected: 0 4 locks held by perf-exec/2869: #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90 #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0 #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510 #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510 irq event stamp: 4806 hardirqs last enabled at (4805): [] _raw_spin_unlock_irqrestore+0x94/0xd0 hardirqs last disabled at (4806): [] perf_event_exec+0x394/0x510 softirqs last enabled at (0): [] copy_process+0xc34/0x1ff0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV Call Trace: dump_stack_lvl+0x98/0xe0 (unreliable) __might_resched+0x2f8/0x310 __mutex_lock+0x6c/0x13f0 thread_imc_event_add+0xf4/0x1b0 event_sched_in+0xe0/0x210 merge_sched_in+0x1f0/0x600 visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0 ctx_flexible_sched_in+0xcc/0x140 ctx_sched_in+0x20c/0x2a0 ctx_resched+0x104/0x1c0 perf_event_exec+0x340/0x510 begin_new_exec+0x730/0xef0 load_elf_binary+0x3f8/0x1e10 ... do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0 WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0 CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670 REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2) MSR: 9000000000021033 CR: 48002824 XER: 00000000 CFAR: c00000000013fb64 IRQMASK: 1 The above warning triggered because the current imc-pmu code uses mutex lock in interrupt disabled sections. The function mutex_lock() internally calls __might_resched(), which will check if IRQs are disabled and in case IRQs are disabled, it will trigger the warning. Fix the issue by changing the mutex lock to spinlock. Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device") Reported-by: Michael Petlan Reported-by: Peter Zijlstra Signed-off-by: Kajol Jain [mpe: Fix comments, trim oops in change log, add reported-by tags] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

powerpc/hv-gpci: Fix hv_gpci event list

2023-01-14T09:16:07+00:00

[ Upstream commit 03f7c1d2a49acd30e38789cd809d3300721e9b0e ] Based on getPerfCountInfo v1.018 documentation, some of the hv_gpci events were deprecated for platform firmware that supports counter_info_version 0x8 or above. Fix the hv_gpci event list by adding a new attribute group called "hv_gpci_event_attrs_v6" and a "ENABLE_EVENTS_COUNTERINFO_V6" macro to enable these events for platform firmware that supports counter_info_version 0x6 or below. And assigning the hv_gpci event list based on output counter info version of underlying plaform. Fixes: 97bf2640184f ("powerpc/perf/hv-gpci: add the remaining gpci requests") Signed-off-by: Kajol Jain Reviewed-by: Madhavan Srinivasan Reviewed-by: Athira Rajeev Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20221130174513.87501-1-kjain@linux.ibm.com Signed-off-by: Sasha Levin