kernel/git/stable/linux.git/arch/x86, branch linux-5.7.y

KVM: Pass MMU notifier range flags to kvm_unmap_hva_range()

2020-08-26T09:42:24+00:00

commit fdfe7cbd58806522e799e2a50a15aee7f2cbb7b6 upstream. The 'flags' field of 'struct mmu_notifier_range' is used to indicate whether invalidate_range_{start,end}() are permitted to block. In the case of kvm_mmu_notifier_invalidate_range_start(), this field is not forwarded on to the architecture-specific implementation of kvm_unmap_hva_range() and therefore the backend cannot sensibly decide whether or not to block. Add an extra 'flags' parameter to kvm_unmap_hva_range() so that architectures are aware as to whether or not they are permitted to block. Cc: Cc: Marc Zyngier Cc: Suzuki K Poulose Cc: James Morse Signed-off-by: Will Deacon Message-Id: <20200811102725.7121-2-will@kernel.org> Signed-off-by: Paolo Bonzini Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

efi/x86: Mark kernel rodata non-executable for mixed mode

2020-08-26T09:42:23+00:00

commit c8502eb2d43b6b9b1dc382299a4d37031be63876 upstream. When remapping the kernel rodata section RO in the EFI pagetables, the protection flags that were used for the text section are being reused, but the rodata section should not be marked executable. Cc: Signed-off-by: Arvind Sankar Link: https://lore.kernel.org/r/20200717194526.3452089-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman

Fix build error when CONFIG_ACPI is not set/enabled:

2020-08-26T09:42:21+00:00

[ Upstream commit ee87e1557c42dc9c2da11c38e11b87c311569853 ] ../arch/x86/pci/xen.c: In function ‘pci_xen_init’: ../arch/x86/pci/xen.c:410:2: error: implicit declaration of function ‘acpi_noirq_set’; did you mean ‘acpi_irq_get’? [-Werror=implicit-function-declaration] acpi_noirq_set(); Fixes: 88e9ca161c13 ("xen/pci: Use acpi_noirq_set() helper to avoid #ifdef") Signed-off-by: Randy Dunlap Reviewed-by: Juergen Gross Cc: Andy Shevchenko Cc: Bjorn Helgaas Cc: Konrad Rzeszutek Wilk Cc: xen-devel@lists.xenproject.org Cc: linux-pci@vger.kernel.org Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin

kvm: x86: Toggling CR4.PKE does not load PDPTEs in PAE mode

2020-08-26T09:42:19+00:00

[ Upstream commit cb957adb4ea422bd758568df5b2478ea3bb34f35 ] See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: b9baba8614890 ("KVM, pkeys: expose CPUID/CR4 to guest") Cc: Huaitong Han Signed-off-by: Jim Mattson Reviewed-by: Peter Shier Reviewed-by: Oliver Upton Message-Id: <20200817181655.3716509-1-jmattson@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

kvm: x86: Toggling CR4.SMAP does not load PDPTEs in PAE mode

2020-08-26T09:42:19+00:00

[ Upstream commit 427890aff8558eb4326e723835e0eae0e6fe3102 ] See the SDM, volume 3, section 4.4.1: If PAE paging would be in use following an execution of MOV to CR0 or MOV to CR4 (see Section 4.1.1) and the instruction is modifying any of CR0.CD, CR0.NW, CR0.PG, CR4.PAE, CR4.PGE, CR4.PSE, or CR4.SMEP; then the PDPTEs are loaded from the address in CR3. Fixes: 0be0226f07d14 ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong Signed-off-by: Jim Mattson Reviewed-by: Peter Shier Reviewed-by: Oliver Upton Message-Id: <20200817181655.3716509-2-jmattson@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

perf/x86/rapl: Fix missing psys sysfs attributes

2020-08-21T11:07:43+00:00

[ Upstream commit 4bb5fcb97a5df0bbc0a27e0252b1e7ce140a8431 ] This fixes a problem introduced by commit: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") that perf event sysfs attributes for psys RAPL domain are missing. Fixes: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") Signed-off-by: Zhang Rui Signed-off-by: Ingo Molnar Reviewed-by: Kan Liang Reviewed-by: Len Brown Acked-by: Jiri Olsa Link: https://lore.kernel.org/r/20200811153149.12242-2-rui.zhang@intel.com Signed-off-by: Sasha Levin

x86/bugs/multihit: Fix mitigation reporting when VMX is not in use

2020-08-21T11:07:39+00:00

[ Upstream commit f29dfa53cc8ae6ad93bae619bcc0bf45cab344f7 ] On systems that have virtualization disabled or unsupported, sysfs mitigation for X86_BUG_ITLB_MULTIHIT is reported incorrectly as: $ cat /sys/devices/system/cpu/vulnerabilities/itlb_multihit KVM: Vulnerable System is not vulnerable to DoS attack from a rogue guest when virtualization is disabled or unsupported in the hardware. Change the mitigation reporting for these cases. Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation") Reported-by: Nelson Dsouza Co-developed-by: Sean Christopherson Signed-off-by: Sean Christopherson Signed-off-by: Pawan Gupta Signed-off-by: Ingo Molnar Reviewed-by: Tony Luck Acked-by: Thomas Gleixner Link: https://lore.kernel.org/r/0ba029932a816179b9d14a30db38f0f11ef1f166.1594925782.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Sasha Levin

x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC

2020-08-21T11:07:39+00:00

[ Upstream commit 7d98585860d845e36ee612832a5ff021f201dbaf ] Frequency descriptor of Lightning Mountain SoC doesn't have all the frequency entries so resulting in the below failure causing a kernel hang: Error MSR_FSB_FREQ index 15 is unknown tsc: Fast TSC calibration failed So, add all the frequency entries in the Lightning Mountain SoC frequency descriptor. Fixes: 0cc5359d8fd45 ("x86/cpu: Update init data for new Airmont CPU model") Fixes: 812c2d7506fd ("x86/tsc_msr: Use named struct initializers") Signed-off-by: Dilip Kota Signed-off-by: Ingo Molnar Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/211c643ae217604b46cbec43a2c0423946dc7d2d.1596440057.git.eswara.kota@linux.intel.com Signed-off-by: Sasha Levin

genirq/affinity: Make affinity setting if activated opt-in

2020-08-21T11:07:17+00:00

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream. John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

irqdomain/treewide: Free firmware node after domain removal

2020-08-19T06:24:18+00:00

commit ec0160891e387f4771f953b888b1fe951398e5d9 upstream. Commit 711419e504eb ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode") unintentionally caused a dangling pointer page fault issue on firmware nodes that were freed after IRQ domain allocation. Commit e3beca48a45b fixed that dangling pointer issue by only freeing the firmware node after an IRQ domain allocation failure. That fix no longer frees the firmware node immediately, but leaves the firmware node allocated after the domain is removed. The firmware node must be kept around through irq_domain_remove, but should be freed it afterwards. Add the missing free operations after domain removal where where appropriate. Fixes: e3beca48a45b ("irqdomain/treewide: Keep firmware node unconditionally allocated") Signed-off-by: Jon Derrick Signed-off-by: Thomas Gleixner Reviewed-by: Andy Shevchenko Acked-by: Bjorn Helgaas # drivers/pci Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1595363169-7157-1-git-send-email-jonathan.derrick@intel.com Signed-off-by: Greg Kroah-Hartman