kernel/git/stable/linux.git/drivers/acpi/bus.c, branch linux-4.8.y

Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-apei' and 'acpi-sleep'

2016-07-25T11:42:25+00:00

* acpi-processor: ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE * acpi-cppc: mailbox: pcc: Add PCC request and free channel declarations ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data ACPI: CPPC: Return error if _CPC is invalid on a CPU * acpi-apei: ACPI / APEI: Add Boot Error Record Table (BERT) support ACPI / einj: Make error paths more talkative ACPI / einj: Convert EINJ_PFX to proper pr_fmt * acpi-sleep: ACPI: Execute _PTS before system reboot

Merge branches 'acpi-bus', 'acpi-pci', 'acpica' and 'acpi-doc'

2016-07-25T11:41:25+00:00

* acpi-bus: ACPI / bus: Support for platform initiated graceful shutdown ACPI / bus: Correct the comments about acpi_subsystem_init() ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error() * acpi-pci: ACPI / PCI: make pci_slot explicitly non-modular ACPI / PCI: pci_slot: Use generic pr_debug utility ACPI / PCI: pci_slot: Use more common logging style * acpica: ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel * acpi-doc: ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation

ACPI / processor_idle: Add support for Low Power Idle(LPI) states

2016-07-21T21:25:58+00:00

ACPI 6.0 introduced an optional object _LPI that provides an alternate method to describe Low Power Idle states. It defines the local power states for each node in a hierarchical processor topology. The OSPM can use _LPI object to select a local power state for each level of processor hierarchy in the system. They used to produce a composite power state request that is presented to the platform by the OSPM. Since multiple processors affect the idle state for any non-leaf hierarchy node, coordination of idle state requests between the processors is required. ACPI supports two different coordination schemes: Platform coordinated and OS initiated. This patch adds initial support for Platform coordination scheme of LPI. Signed-off-by: Sudeep Holla Signed-off-by: Rafael J. Wysocki

ACPI: add support for ACPI reconfiguration notifiers

2016-07-08T19:52:35+00:00

Add support for ACPI reconfiguration notifiers to allow subsystems to react to changes in the ACPI tables that happen after the initial enumeration. This is similar with the way dynamic device tree notifications work. The reconfigure notifications supported for now are device add and device remove. Since ACPICA allows only one table notification handler, this patch makes the table notifier function generic and moves it out of the sysfs specific code. Signed-off-by: Octavian Purdila Reviewed-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / bus: Support for platform initiated graceful shutdown

2016-07-06T21:30:50+00:00

This patch adds support for platform initited graceful shutdown as described in sections 5.6.6(Table-143) and 6.3.5.1 of ACPI 6.1 spec The OSPM will get a graceful shutdown request via a Notify operator on \_SB device with a value of 0x81 per section 5.6.6. Following the shutdown request from platform the OSPM needs to follow the processing sequence as described in section 6.2.5.1. v3 * Switched to regular work with delays from delayed work * Dropped changes to actypes.h * Small style changes v2 * Switched from standalone driver to a simple notify handler v1 * Initial Cc: "Rafael J. Wysocki" Signed-off-by: Prashanth Prakash Signed-off-by: Rafael J. Wysocki

ACPI / bus: Correct the comments about acpi_subsystem_init()

2016-07-06T00:14:08+00:00

In acpi_subsystem_init(), function acpi_enable_subsystem() is called to do the real job. However with different flags passed to acpi_enable_subsystem(), different code is executed. In acpi_subsystem_init(), with "~ACPI_NO_ACPI_ENABLE" passed in, it will only switch over the platform to the ACPI mode. The remaining part of acpi_enable_subsystem() is done when acpi_bus_init() is called. So the comments above acpi_subsystem_init() is not exact, change it here. Signed-off-by: Baoquan He Signed-off-by: Rafael J. Wysocki

ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error()

2016-06-23T13:27:36+00:00

acpi_print_osc_error() basically duplicates the functionalit of acpi_handle_debug(), so use that one in there. While at it, convert the explicit KERN_DEBUG prints to pr_debug() (and apply it to continuation messages too). Signed-off-by: Rafael J. Wysocki

ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC

2016-06-07T00:29:53+00:00

According to the Windows probing result, during the table loading, the EC device described in the ECDT should be used. And the ECDT EC is also effective during the period the namespace objects are initialized (we can see a separate process executing _STA/_INI on Windows before executing other device specific control methods, for example, EC._REG). During the device enumration, the EC device described in the DSDT should be used. But there are differences between Linux and Windows around the device probing order. Thus in Linux, we should enable the DSDT EC as early as possible before enumerating devices in order not to trigger issues related to the device enumeration order differences. This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to fix the gap. This also fixes a user reported regression triggered after we switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant. Fixes: 59f0aa9480cf (ACPI 2.0 / ECDT: Remove early namespace reference from EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261 Reported-and-tested-by: Gabriele Mazzotta Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki

ACPI 2.0 / ECDT: Enable correct ECDT initialization order

2016-04-09T01:06:44+00:00

With wrong ECDT fixes reverted, it is possible to put ECDT probing before acpi_enable_subsystem(). But the ultimate purpose of ECDT re-enabling is to put the ECDT probing before the namespace initialization (acpi_load_tables()). This patch achieves this with protections so that we can enable it later when all necessary corrections are upstreamed. Link 4: https://bugzilla.kernel.org/show_bug.cgi?id=112911 Signed-off-by: Lv Zheng Tested-by: Chris Bainbridge Signed-off-by: Rafael J. Wysocki

Merge branch 'acpi-processor'

2016-04-01T23:17:36+00:00

* acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC