kernel/git/stable/linux.git/drivers/acpi/pmic, branch linux-5.0.y

ACPI / PMIC: xpower: Fix TS-pin current-source handling

2019-01-07T11:21:38+00:00

The current-source used for the battery temp-sensor (TS) is shared with the GPADC. For proper fuel-gauge and charger operation the TS current-source needs to be permanently on. But to read the GPADC we need to temporary switch the TS current-source to ondemand, so that the GPADC can use it, otherwise we will always read an all 0 value. The switching from on to on-ondemand is not necessary when the TS current-source is off (this happens on devices which do not have a TS). Prior to this commit there were 2 issues with our handling of the TS current-source switching: 1) We were writing hardcoded values to the ADC TS pin-ctrl register, overwriting various other unrelated bits. Specifically we were overwriting the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA independent of its original setting. On a Chuwi Vi10 tablet this was causing us to get a too high adc value (due to a too high current-source) resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in: ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion] ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR This commit fixes this by using regmap_update_bits to change only the relevant bits. 2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally enabling the TS current-source even on devices where the TS-pin is not used and the current-source thus was off on entry of the function. This commit fixes this by checking if the TS current-source is off when entering intel_xpower_pmic_get_raw_temp() and if so it is left as is. Fixes: 58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC) Signed-off-by: Hans de Goede Acked-by: Andy Shevchenko Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: xpower: Block P-Unit I2C access during read-modify-write

2018-10-25T15:00:05+00:00

intel_xpower_pmic_update_power() does a read-modify-write of the output control register. The i2c-designware code blocks the P-Unit I2C access during the read and write by taking the P-Unit's PMIC bus semaphore. But between the read and the write that semaphore is released and the P-Unit could make changes to the register which we then end up overwriting. This commit makes intel_xpower_pmic_update_power() take the semaphore itself so that it is held over the entire read-modify-write, avoiding this race. Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Convert drivers to use SPDX identifier

2018-09-10T10:57:55+00:00

Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Sort headers alphabetically

2018-09-10T10:57:04+00:00

Sort headers alphabetically for better maintenance. No functional change. Signed-off-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: CrystalCove: Extend PMOP support to support all possible fields

2018-08-14T21:55:09+00:00

Prior to this commit the CRC PMOP handler only supported the X285 and V18X PMOP fields. Leading to errors like these on device using the VBUS field: [ 765.766489] ACPI Error: AE_BAD_PARAMETER, Returned by Handler for [UserDefinedRegion] (20180531/evregion-266) [ 765.766526] ACPI Error: Method parse/execution failed \_SB.I2C1.BATC._BST, AE_BAD_PARAMETER (20180531/psparse-516) [ 765.766586] ACPI Error: AE_BAD_PARAMETER, Evaluating _BST (20180531/battery-577) This commit adds support for all known fields to the CRC PMOP OpRegion handler, the name and register info in this commit comes from: https://github.com/01org/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/0002-ACPI-Adding-support-for-WC-and-CRC-opregion.patch Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Replace license boilerplate with SPDX license identifier

2018-02-22T22:14:58+00:00

Remove the GPL v2 license boilerplate and update with the SPDX license identifier. Signed-off-by: Rajmohan Mani Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: Convert to use builtin_platform_driver() macro

2018-01-11T01:17:41+00:00

All of PMIC OpRegion drivers can't be modules, thus, convert them to use builtin_platform_driver() macro and remove redundant MODULE_*() macros. No functional change intended. Signed-off-by: Andy Shevchenko Reviewed-by: Hans de Goede Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PMIC: constify platform_device_id

2017-12-13T00:06:59+00:00

platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

Merge tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2017-11-16T17:15:57+00:00

Pull MFD updates from Lee Jones: "New drivers: - Add support for Cherry Trail Dollar Cove TI PMIC - Add support for Add Spreadtrum SC27xx series PMICs New device support: - Add support Regulator to axp20x New functionality: - Add DT support; aspeed-scu sc27xx-pmic - Add power saving support; rts5249 Fix-ups: - DT clean-up/rework; tps65217, max77693, iproc-cdru, iproc-mhb, tps65218 - Staticise/constify; stw481x - Use new succinct IRQ API; fsl-imx25-tsadc - Kconfig fix-ups; MFD_TPS65218 - Identify SPI method; lpc_ich - Use managed resources (devm_*) calls; ssbi - Remove unused/obsolete code/documentation; mc13xxx Bug fixes: - Fix typo in MAINTAINERS - Fix error handling; mxs-lradc - Clean-up IRQs on .remove; fsl-imx25-tsadc" * tag 'mfd-next-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (21 commits) dt-bindings: mfd: mc13xxx: Remove obsolete property mfd: axp20x: Add axp20x-regulator cell for AXP813 mfd: Add Spreadtrum SC27xx series PMICs driver dt-bindings: mfd: Add Spreadtrum SC27xx PMIC documentation mfd: ssbi: Use devm_of_platform_populate() mfd: fsl-imx25: Clean up irq settings during removal mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() mfd: lpc_ich: Avoton/Rangeley uses SPI_BYT method mfd: tps65218: Introduce dependency on CONFIG_OF mfd: tps65218: Correct the config description MAINTAINERS: Fix Dialog search term for watchdog binding file mfd: fsl-imx25: Set irq handler and data in one go mfd: rts5249: Add support for RTS5250S power saving ACPI / PMIC: Add opregion driver for Intel Dollar Cove TI PMIC mfd: Add support for Cherry Trail Dollar Cove TI PMIC syscon: dt-bindings: Add binding document for iProc MHB block syscon: dt-bindings: Add binding doc for Broadcom iProc CDRU mfd: max77693: Add muic of_compatible in mfd_cell mfd: stw481x: Make three arrays static const, reduces object code size mfd: tps65217: Introduce dependency on CONFIG_OF ...

Merge branches 'acpi-pmic', 'acpi-apei' and 'acpi-x86'

2017-11-13T00:37:17+00:00

* acpi-pmic: ACPI / PMIC: Add TI PMIC TPS68470 operation region driver * acpi-apei: APEI / ERST: use 64-bit timestamps ACPI / APEI: Remove arch_apei_flush_tlb_one() arm64: mm: Remove arch_apei_flush_tlb_one() ACPI / APEI: Remove ghes_ioremap_area ACPI / APEI: Replace ioremap_page_range() with fixmap ACPI / APEI: remove the unused dead-code for SEA/NMI notification type ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq() * acpi-x86: ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions