kernel/git/stable/linux.git/drivers/acpi, branch linux-4.10.y

ACPI / power: Avoid maybe-uninitialized warning

2017-04-27T07:12:58+00:00

commit fe8c470ab87d90e4b5115902dd94eced7e3305c3 upstream. gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing) Signed-off-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / EC: Use busy polling mode when GPE is not enabled

2017-04-21T07:32:42+00:00

commit c3a696b6e8f8f75f9f75e556a9f9f6472eae2655 upstream. When GPE is not enabled, it is not efficient to use the wait polling mode as it introduces an unexpected scheduler delay. So before the GPE handler is installed, this patch uses busy polling mode for all EC(s) and the logic can be applied to non boot EC(s) during the suspend/resume process. Link: https://bugzilla.kernel.org/show_bug.cgi?id=191561 Tested-by: Jakobus Schurz Tested-by: Chen Yu Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Set the visited flag for all enumerated devices

2017-04-21T07:32:38+00:00

commit f406270bf73d71ea7b35ee3f7a08a44f6594c9b1 upstream. Commit 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) attempted to fix a problem with ACPI-based enumerateion of I2C/SPI devices, but it forgot to ensure that the visited flag will be set for all of the other enumerated devices, so fix that. Fixes: 10c7e20b2ff3 (ACPI / scan: fix enumeration (visited) flags for bus rescans) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194885 Reported-and-tested-by: Kevin Locke Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Signed-off-by: Greg Kroah-Hartman

acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)

2017-04-21T07:32:38+00:00

commit b03b99a329a14b7302f37c3ea6da3848db41c8c5 upstream. While reviewing the -stable patch for commit 86ef58a4e35e "nfit, libnvdimm: fix interleave set cookie calculation" Ben noted: "This is returning an int, thus it's effectively doing a 32-bit comparison and not the 64-bit comparison you say is needed." Update the compare operation to be immune to this integer demotion problem. Cc: Nicholas Moulin Fixes: 86ef58a4e35e ("nfit, libnvdimm: fix interleave set cookie calculation") Reported-by: Ben Hutchings Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

ACPI: save NVS memory for Lenovo G50-45

2017-04-12T10:42:11+00:00

[ Upstream commit cbc00c1310d34139a63946482b40a6b261a03fb9 ] In commit 821d6f0359b0 (ACPI / sleep: Do not save NVS for new machines to accelerate S3), to optimize S3 suspend/resume speed, code is introduced to ignore NVS memory saving during S3 for all the platforms later than 2012. But, Lenovo G50-45, a platform released in 2015, still needs NVS memory saving during S3. A quirk is introduced for this platform. Link: https://bugzilla.kernel.org/show_bug.cgi?id=189431 Tested-by: Przemek Signed-off-by: Zhang Rui [ rjw: Drop unnecessary code ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ACPI / button: Change default behavior to lid_init_state=open

2017-04-12T10:42:11+00:00

[ Upstream commit 77e9a4aa9de10cc1418bf9a892366988802a8025 ] More and more platforms need the button.lid_init_state=open quirk. This patch sets it the default behavior. If a platform doesn't send lid open event or lid open event is lost due to the underlying system problems, then we can compare various combinations: 1. systemd/acpid is used to suspend system or not, systemd has a special logic forcing open event after resuming; 2. _LID returns a cached value or not. The result is as follows: 1. lid_init_state=method 1. cached 1. resumed by lid: (x) event=close (x) systemd=suspends again (x) acpid=suspends again (x) state=close 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=close (x) systemd=suspends again (x) acpid=suspends again (o) state=close 2. lid_init_state=open 1. cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (x) state=close 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=open (o) systemd=resumes (o) acpid=resumes (o) state=open 2. resumed by other: (x) event=open (o) systemd=resumes (o) acpid=resumes (o) state=close 3. lid_init_state=ignore 1. cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (x) state=close 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close 2. non-cached 1. resumed by lid: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=open 2. resumed by other: (o) event=none (x) systemd=suspends again (o) acpid=resumes (o) state=close As a conclusion: 1. With systemd changed, lid_init_state=ignore has only one problem and the problem comes from an underlying issue, not userspace and kernel lid handling. 2. Without systemd changed, lid_init_state=open can be the default behavior as the pass ratio is not much worse than lid_init_state=ignore. 3. lid_init_state=method is buggy, we can have a separate patch to make it deprectated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187271 Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Prefer devices without _HID for _ADR matching

2017-04-12T10:42:05+00:00

commit fdad4e7a876a2cb3d2c1f04e5418c324e79fffef upstream. Commit c2a6bbaf0c5f (ACPI / scan: Prefer devices without _HID/_CID for _ADR matching) added a list_empty(&adev->pnp.ids) check to find_child_checks() so as to catch situations in which the ACPI core attempts to decode _ADR for a device having a _HID too which is strictly against the spec. However, it overlooked the fact that the adev->pnp.ids list for the devices taken into account by find_child_checks() may contain device IDs set internally by the kernel, like "LNXVIDEO" (thanks to Zhang Rui for that realization), and it broke the enumeration of those devices as a result. To unbreak it, replace the overly coarse grained list_empty() check with a much more precise check against the pnp.type.platform_id flag which is only set for devices having a _HID (that's how it should be done from the start, as having both _ADR and _CID is actually permitted). Fixes: c2a6bbaf0c5f (ACPI / scan: Prefer devices without _HID/_CID for _ADR matching) Link: https://bugzilla.kernel.org/show_bug.cgi?id=194889 Reported-and-tested-by: Mike Tested-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: Do not create a platform_device for IOAPIC/IOxAPIC

2017-04-08T07:35:07+00:00

commit 08f63d97749185fab942a3a47ed80f5bd89b8b7d upstream. No platform-device is required for IO(x)APICs, so don't even create them. [ rjw: This fixes a problem with leaking platform device objects after IOAPIC/IOxAPIC hot-removal events.] Signed-off-by: Joerg Roedel Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: Fix incompatibility with mcount-based function graph tracing

2017-04-08T07:35:07+00:00

commit 61b79e16c68d703dde58c25d3935d67210b7d71b upstream. Paul Menzel reported a warning: WARNING: CPU: 0 PID: 774 at /build/linux-ROBWaj/linux-4.9.13/kernel/trace/trace_functions_graph.c:233 ftrace_return_to_handler+0x1aa/0x1e0 Bad frame pointer: expected f6919d98, received f6919db0 from func acpi_pm_device_sleep_wake return to c43b6f9d The warning means that function graph tracing is broken for the acpi_pm_device_sleep_wake() function. That's because the ACPI Makefile unconditionally sets the '-Os' gcc flag to optimize for size. That's an issue because mcount-based function graph tracing is incompatible with '-Os' on x86, thanks to the following gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=42109 I have another patch pending which will ensure that mcount-based function graph tracing is never used with CONFIG_CC_OPTIMIZE_FOR_SIZE on x86. But this patch is needed in addition to that one because the ACPI Makefile overrides that config option for no apparent reason. It has had this flag since the beginning of git history, and there's no related comment, so I don't know why it's there. As far as I can tell, there's no reason for it to be there. The appropriate behavior is for it to honor CONFIG_CC_OPTIMIZE_FOR_{SIZE,PERFORMANCE} like the rest of the kernel. Reported-by: Paul Menzel Signed-off-by: Josh Poimboeuf Acked-by: Steven Rostedt (VMware) Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

nfit, libnvdimm: fix interleave set cookie calculation

2017-03-15T02:20:13+00:00

commit 86ef58a4e35e8fa66afb5898cf6dec6a3bb29f67 upstream. The interleave-set cookie is a sum that sanity checks the composition of an interleave set has not changed from when the namespace was initially created. The checksum is calculated by sorting the DIMMs by their location in the interleave-set. The comparison for the sort must be 64-bit wide, not byte-by-byte as performed by memcmp() in the broken case. Fix the implementation to accept correct cookie values in addition to the Linux "memcmp" order cookies, but only allow correct cookies to be generated going forward. It does mean that namespaces created by third-party-tooling, or created by newer kernels with this fix, will not validate on older kernels. However, there are a couple mitigating conditions: 1/ platforms with namespace-label capable NVDIMMs are not widely available. 2/ interleave-sets with a single-dimm are by definition not affected (nothing to sort). This covers the QEMU-KVM NVDIMM emulation case. The cookie stored in the namespace label will be fixed by any write the namespace label, the most straightforward way to achieve this is to write to the "alt_name" attribute of a namespace in sysfs. Fixes: eaf961536e16 ("libnvdimm, nfit: add interleave-set state-tracking infrastructure") Reported-by: Nicholas Moulin Tested-by: Nicholas Moulin Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman