kernel/git/stable/linux.git/drivers/acpi, branch linux-4.11.y

ACPI / scan: Fix enumeration for special SPI and I2C devices

2017-06-29T11:02:54+00:00

commit e4330d8bf669139a983255d1801733b64c2ae841 upstream. Commit f406270bf73d ("ACPI / scan: Set the visited flag for all enumerated devices") caused that two group of special SPI or I2C devices do not enumerate. SPI and I2C devices are expected to be enumerated by the SPI and I2C subsystems but change caused that acpi_bus_attach() marks those devices with acpi_device_set_enumerated(). First group of devices are matched using Device Tree compatible property with special _HID "PRP0001". Those devices have matched scan handler, acpi_scan_attach_handler() retuns 1 and acpi_bus_attach() marks them with acpi_device_set_enumerated(). Second group of devices without valid _HID such as "LNXVIDEO" have device->pnp.type.platform_id set to zero and change again marks them with acpi_device_set_enumerated(). Fix this by flagging the SPI and I2C devices during struct acpi_device object initialization time and let the code in acpi_bus_attach() to go through the device_attach() and acpi_default_enumeration() path for all SPI and I2C devices. Fixes: f406270bf73d (ACPI / scan: Set the visited flag for all enumerated devices) Signed-off-by: Jarkko Nikula Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / scan: Apply default enumeration to devices with ACPI drivers

2017-06-29T11:02:54+00:00

commit f5beabfe61794d9a9d9549d387cda2bffd81e504 upstream. The current code in acpi_bus_attach() is inconsistent with respect to device objects with ACPI drivers bound to them, as it allows ACPI drivers to bind to device objects with existing "physical" device companions, but it doesn't allow "physical" device objects to be created for ACPI device objects with ACPI drivers bound to them. Thus, in some cases, the outcome depends on the ordering of events which is confusing at best. For this reason, modify acpi_bus_attach() to call acpi_default_enumeration() for device objects with the pnp.type.platform_id flag set regardless of whether or not any ACPI drivers are bound to them. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Reviewed-by: Joey Lee Cc: Jarkko Nikula Signed-off-by: Greg Kroah-Hartman

Revert "ACPI / button: Change default behavior to lid_init_state=open"

2017-06-07T10:10:08+00:00

commit 878d8db039daac0938238e9a40a5bd6e50ee3c9b upstream. Revert commit 77e9a4aa9de1 (ACPI / button: Change default behavior to lid_init_state=open) which changed the kernel's behavior on laptops that boot with closed lids and expect the lid switch state to be reported accurately by the kernel. If you boot or resume your laptop with the lid closed on a docking station while using an external monitor connected to it, both internal and external displays will light on, while only the external should. There is a design choice in gdm to only provide the greeter on the internal display when lit on, so users only see a gray area on the external monitor. Also, the cursor will not show up as it's by default on the internal display too. To "fix" that, users have to open the laptop once and close it once again to sync the state of the switch with the hardware state. Even if the "method" operation mode implementation can be buggy on some platforms, the "open" choice is worse. It breaks docking stations basically and there is no way to have a user-space hwdb to fix that. On the contrary, it's rather easy in user-space to have a hwdb with the problematic platforms. Then, libinput (1.7.0+) can fix the state of the lid switch for us: you need to set the udev property LIBINPUT_ATTR_LID_SWITCH_RELIABILITY to 'write_open'. When libinput detects internal keyboard events, it will overwrite the state of the switch to open, making it reliable again. Given that logind only checks the lid switch value after a timeout, we can assume the user will use the internal keyboard before this timeout expires. For example, such a hwdb entry is: libinput:name:*Lid Switch*:dmi:*svnMicrosoftCorporation:pnSurface3:* LIBINPUT_ATTR_LID_SWITCH_RELIABILITY=write_open Link: https://bugzilla.gnome.org/show_bug.cgi?id=782380 Signed-off-by: Benjamin Tissoires Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPICA: Tables: Fix regression introduced by a too early mechanism enabling

2017-06-07T10:10:08+00:00

commit 2ea65321b83539afc1d45c1bea39c55ab42af62b upstream. In the Linux kernel, acpi_get_table() "clones" haven't been fully balanced by acpi_put_table() invocations. In upstream ACPICA, due to the design change, there are also unbalanced acpi_get_table_by_index() invocations requiring special care. acpi_get_table() reference counting mismatches may occor due to that and printing error messages related to them is not useful at this point. The strict balanced validation count check should only be enabled after confirming that all invocations are safe and aligned with their designed purposes. Thus this patch removes the error value returned by acpi_tb_get_table() in that case along with the accompanying error message to fix the issue. Fixes: 174cc7187e6f (ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel) Reported-by: Anush Seetharaman Reported-by: Dan Williams Signed-off-by: Lv Zheng [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service

2017-06-07T10:10:07+00:00

commit 0de0e198bc7191a0e46cf71f66fec4d07ca91396 upstream. Reading an ACPI table through the /sys/firmware/acpi/tables interface more than 65,536 times leads to the following log message: ACPI Error: Table ffff88033595eaa8, Validation count is zero after increment (20170119/tbutils-423) ...and the table being unavailable until the next reboot. Add the missing acpi_put_table() so the table ->validation_count is decremented after each read. Reported-by: Anush Seetharaman Fixes: 174cc7187e6f "ACPICA: Tables: Back port acpi_get_table_with_size() ..." Signed-off-by: Dan Williams Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

acpi, nfit: Fix the memory error check in nfit_handle_mce()

2017-06-07T10:10:07+00:00

commit fc08a4703a418a398bbb575ac311d36d110ac786 upstream. The check for an MCE being a memory error in the NFIT mce handler was bogus. Use the new mce_is_memory_error() helper to detect the error properly. Reported-by: Tony Luck Signed-off-by: Vishal Verma Signed-off-by: Borislav Petkov Link: http://lkml.kernel.org/r/20170519093915.15413-3-bp@alien8.de Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Revert "ACPI / button: Remove lid_init_state=method mode"

2017-06-07T10:10:07+00:00

commit f369fdf4f661322b73f3307e9f3cd55fb3a20123 upstream. This reverts commit ecb10b694b72ca5ea51b3c90a71ff2a11963425a. The only expected ACPI control method lid device's usage model is 1. Listen to the lid notification, 2. Evaluate _LID after being notified by BIOS, 3. Suspend the system (if users configure to do so) after seeing "close". It's not ensured that BIOS will notify OS after boot/resume, and it's not ensured that BIOS will always generate "open" event upon opening the lid. But there are 2 wrong usage models: 1. When the lid device is responsible for suspend/resume the system, userspace requires to see "open" event to be paired with "close" after the system is resumed, or it will suspend the system again. 2. When an external monitor connects to the laptop attached docks, userspace requires to see "close" event after the system is resumed so that it can determine whether the internal display should remain dark and the external display should be lit on. After we made default kernel behavior to be suitable for usage model 1, users of usage model 2 start to report regressions for such behavior change. Reversion of button.lid_init_state=method doesn't actually reverts to old default behavior as doing so can enter a regression loop, but facilitates users to work the reported regressions around with button.lid_init_state=method. Fixes: ecb10b694b72 (ACPI / button: Remove lid_init_state=method mode) Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259 Tested-by: Steffen Weber Tested-by: Julian Wiedmann Reported-by: Joachim Frieben Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PCI/ACPI: Add ThunderX pass2.x 2nd node MCFG quirk

2017-05-25T13:46:28+00:00

commit cd183740480f045600aa1fa38fe70809b5498f05 upstream. Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. However, for pass2.x some devices (like EDAC) advertise incorrect base addresses in their BARs which results in driver probe failure during resource request. Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary quirk entry to obtain BAR addresses correction using EA header emulation. Fixes: 44f22bd91e88 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") Signed-off-by: Tomasz Nowicki Signed-off-by: Bjorn Helgaas Acked-by: Robert Richter Signed-off-by: Greg Kroah-Hartman

PCI/ACPI: Tidy up MCFG quirk whitespace

2017-05-25T13:46:28+00:00

commit ced414a14f709fc0af60bd381ba8a566dc566869 upstream. With no blank lines, it's not obvious where the macro definitions end and the uses begin. Add some blank lines and reorder the ThunderX definitions. No functional change intended. Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

ACPI / power: Avoid maybe-uninitialized warning

2017-04-19T20:46:10+00:00

gcc -O2 cannot always prove that the loop in acpi_power_get_inferred_state() is enterered at least once, so it assumes that cur_state might not get initialized: drivers/acpi/power.c: In function 'acpi_power_get_inferred_state': drivers/acpi/power.c:222:9: error: 'cur_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets the variable to zero at the start of the loop, to ensure that there is well-defined behavior even for an empty list. This gets rid of the warning. The warning first showed up when the -Os flag got removed in a bug fix patch in linux-4.11-rc5. I would suggest merging this addon patch on top of that bug fix to avoid introducing a new warning in the stable kernels. Fixes: 61b79e16c68d (ACPI: Fix incompatibility with mcount-based function graph tracing) Cc: All applicable Signed-off-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki