kernel/git/stable/linux.git/drivers/bluetooth/Kconfig, branch linux-4.13.y

Bluetooth: hci_nokia: select BT_HCIUART_H4

2017-05-18T11:59:05+00:00

We see the following build failure with CONFIG_BT_HCIUART_NOKIA=y and CONFIG_BT_HCIUART_H4=n: drivers/bluetooth/hci_nokia.c: In function 'nokia_recv': drivers/bluetooth/hci_nokia.c:644:18: error: implicit declaration of function 'h4_recv_buf' [-Werror=implicit-function-declaration] ... Fix this by selecting the BT_HCIUART_H4 symbol like all the other users of the protocoll. Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Tobias Regnery Reviewed-by: Sebastian Reichel Signed-off-by: Marcel Holtmann

Bluetooth: hci_uart: fix kconfig dependency

2017-05-18T11:52:49+00:00

We see the following link error with CONFIG_BT_HCIUART=y, CONFIG_BT_HCIUART_LL=y and CONFIG_SERIAL_DEV_BUS=m: drivers/built-in.o: In function 'll_close': supp.c:(.text+0x55add4): undefined reference to 'serdev_device_close' supp.c:(.text+0x55add4): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_close' drivers/built-in.o: In function 'll_open': supp.c:(.text+0x55aed0): undefined reference to 'serdev_device_open' supp.c:(.text+0x55aed0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_open' drivers/built-in.o: In function `hci_ti_probe': supp.c:(.text+0x55b00c): undefined reference to 'hci_uart_register_device' supp.c:(.text+0x55b00c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'hci_uart_register_device' drivers/built-in.o: In function `ll_setup': supp.c:(.text+0x55b08c): undefined reference to 'serdev_device_set_flow_control' supp.c:(.text+0x55b08c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_set_flow_control' supp.c:(.text+0x55b324): undefined reference to 'serdev_device_set_baudrate' supp.c:(.text+0x55b324): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol 'serdev_device_set_baudrate' drivers/built-in.o: In function 'll_init': supp.c:(.init.text+0x1b508): undefined reference to '__serdev_device_driver_register' supp.c:(.init.text+0x1b508): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol '__serdev_device_driver_register' Fix this by dependig BT_HCIUART_LL on the BT_HCIUART_SERDEV symbol. This implies a dependency on BT_HCIUART and hci_ll.c is only compiled in if SERIAl_DEV_BUS is built in or SERIAL_DEV_BUS and BT_HCIUART are modules. Fixes: 371805522f87 ("bluetooth: hci_uart: add LL protocol serdev driver support") Signed-off-by: Tobias Regnery Signed-off-by: Marcel Holtmann

Bluetooth: try to improve CONFIG_SERIAL_DEV_BUS dependency

2017-04-22T08:28:40+00:00

With CONFIG_SERIAL_DEV_BUS=m, the hci_serdev.o file does not actually get built into hci_uart.o as the Makefile doesn't pick it up, leading to a link error with anything referring to it: ERROR: "hci_uart_register_device" [drivers/bluetooth/hci_nokia.ko] undefined! scripts/Makefile.modpost:91: recipe for target '__modpost' failed Changing this in the Makefile would cause another problem when hci_uart itself is built-in and cannot reference symbols from the serdev module. This tries to address both problems by introducing a new hidden Kconfig symbol that controls both the compilation of hci_serdev.o and whether the Nokia driver can be selected. This seems to address the problem for me, though there might be a better way to do it. Fixes: 7bb318680e86 ("Bluetooth: add nokia driver") Signed-off-by: Arnd Bergmann Signed-off-by: Marcel Holtmann

Bluetooth: add nokia driver

2017-04-13T08:32:23+00:00

This adds a driver for the Nokia H4+ protocol, which is used at least on the Nokia N9, N900 & N950. Signed-off-by: Sebastian Reichel Signed-off-by: Marcel Holtmann

soc: qcom: smd: Transition client drivers from smd to rpmsg

2017-03-29T00:58:07+00:00

By moving these client drivers to use RPMSG instead of the direct SMD API we can reuse them ontop of the newly added GLINK wire-protocol support found in the 820 and 835 Qualcomm platforms. As the new (RPMSG-based) and old SMD implementations are mutually exclusive we have to change all client drivers in one commit, to make sure we have a working system before and after this transition. Acked-by: Andy Gross Acked-by: Kalle Valo Acked-by: Marcel Holtmann Signed-off-by: Bjorn Andersson Signed-off-by: David S. Miller

Bluetooth: btqcomsmd: fix compile-test dependency

2017-03-23T02:22:04+00:00

compile-testing fails when QCOM_SMD is a loadable module: drivers/bluetooth/built-in.o: In function `btqcomsmd_send': btqca.c:(.text+0xa8): undefined reference to `qcom_smd_send' drivers/bluetooth/built-in.o: In function `btqcomsmd_probe': btqca.c:(.text+0x3ec): undefined reference to `qcom_wcnss_open_channel' btqca.c:(.text+0x46c): undefined reference to `qcom_smd_set_drvdata' This clarifies the dependency to allow compile-testing only when SMD is completely disabled, otherwise the dependency on QCOM_SMD will make sure we can link against it. Fixes: e27ee2b16bad ("Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabled") Signed-off-by: Arnd Bergmann [bjorn: Restructure and clarify dependency to QCOM_WCNSS_CTRL] Signed-off-by: Bjorn Andersson Acked-by: Marcel Holtmann Signed-off-by: David S. Miller

Bluetooth: btqcomsmd: Allow driver to build if COMPILE_TEST is enabled

2017-02-16T16:36:31+00:00

The driver only has runtime but no build time dependency with QCOM_SMD && QCOM_WCNSS_CTRL. So it can be built for testing purposes if COMPILE_TEST option is enabled. This is useful to have more build coverage and make sure that the driver is not affected by changes that could cause build regressions. Signed-off-by: Javier Martinez Canillas Signed-off-by: Marcel Holtmann

Bluetooth: hci_uart: Add Marvell support

2016-09-19T18:32:03+00:00

This patch introduces support for Marvell Bluetooth controller over UART (8897 for now). In order to send the final firmware at full speed, a helper firmware is firstly sent. Firmware download is driven by the controller which sends request firmware packets (including expected size). This driver is a global rework of the one proposed by Amitkumar Karwar . Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann

Bluetooth: add WCNSS dependency for HCI driver

2016-09-19T18:19:34+00:00

The newly added bluetooth driver is based on the soc-specific support, but lacks the obvious compile-time dependency on that: drivers/bluetooth/btqcomsmd.o: In function `btqcomsmd_probe': btqcomsmd.c:(.text.btqcomsmd_probe+0x40): undefined reference to `qcom_wcnss_open_channel' btqcomsmd.c:(.text.btqcomsmd_probe+0x5c): undefined reference to `qcom_wcnss_open_channel' Makefile:969: recipe for target 'vmlinux' failed Fixes: 90c107dc8b2c ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Arnd Bergmann Signed-off-by: Marcel Holtmann

Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver

2016-09-19T18:19:34+00:00

The Qualcomm WCNSS chip provides two SMD channels to the BT core; one for command and one for event packets. This driver exposes the two channels as a hci device. Signed-off-by: Bjorn Andersson Signed-off-by: Bjorn Andersson Signed-off-by: Marcel Holtmann