kernel/git/stable/linux.git/drivers/bus, branch linux-5.16.y

mips: cdmm: Fix refcount leak in mips_cdmm_phys_base

2022-04-08T12:06:15+00:00

[ Upstream commit 4528668ca331f7ce5999b7746657b46db5b3b785 ] The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 2121aa3e2312 ("mips: cdmm: Add mti,mips-cdmm dtb node support") Signed-off-by: Miaoqian Lin Acked-by: Serge Semin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

bus: mhi: Fix MHI DMA structure endianness

2022-04-08T12:05:20+00:00

commit ed2d980503235829aa3e0c7ae3b82374c30a081c upstream. The MHI driver does not work on big endian architectures. The controller never transitions into mission mode. This appears to be due to the modem device expecting the various contexts and transfer rings to have fields in little endian order in memory, but the driver constructs them in native endianness. Fix MHI event, channel and command contexts and TRE handling macros to use explicit conversion to little endian. Mark fields in relevant structures as little endian to document this requirement. Fixes: a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions") Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam Reviewed-by: Alex Elder Signed-off-by: Paul Davey Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20220301160308.107452-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman

bus: mhi: pci_generic: Add mru_default for Quectel EM1xx series

2022-04-08T12:05:20+00:00

commit 2413ffbf19a95cfcd7adf63135c5a9343a66d0a2 upstream. For default mechanism, the driver uses default MRU 3500 if mru_default is not initialized. The Qualcomm configured the MRU size to 32768 in the WWAN device FW. So, we align the driver setting with Qualcomm FW setting. Link: https://lore.kernel.org/r/MEYP282MB2374EE345DADDB591AFDA6AFFD2E9@MEYP282MB2374.AUSP282.PROD.OUTLOOK.COM Fixes: ac4bf60bbaa0 ("bus: mhi: pci_generic: Introduce quectel EM1XXGR-L support") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam Signed-off-by: Yonglin Tan Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20220301160308.107452-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman

bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W

2022-02-16T11:58:48+00:00

commit 05daa805a86c831ad9692f6f15e1b877c8f10638 upstream. For default mechanism, product would use default MRU 3500 if they didn't define it. But for Cinterion MV31-W, there is a known issue which MRU 3500 would lead to data connection lost. So we align it with Qualcomm default MRU settings. Link: https://lore.kernel.org/r/20220119102519.5342-1-slark_xiao@163.com [mani: Modified the commit message to reflect Cinterion MV31-W and CCed stable] Fixes: 87693e092bd0 ("bus: mhi: pci_generic: Add Cinterion MV31-W PCIe to MHI") Cc: stable@vger.kernel.org # v5.14 + Reviewed-by: Manivannan Sadhasivam Signed-off-by: Slark Xiao Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20220205135731.157871-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman

bus: mhi: pci_generic: Add mru_default for Foxconn SDX55

2022-02-16T11:58:48+00:00

commit a0572cea8866230ac13da6358c88075f89e99b20 upstream. For default mechanism, product would use default MRU 3500 if they didn't define it. But for Foxconn SDX55, there is a known issue which MRU 3500 would lead to data connection lost. So we align it with Qualcomm default MRU settings. Link: https://lore.kernel.org/r/20220119101213.5008-1-slark_xiao@163.com [mani: Added pci_generic prefix to subject and CCed stable] Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Cc: stable@vger.kernel.org # v5.12+ Reviewed-by: Manivannan Sadhasivam Signed-off-by: Slark Xiao Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20220205135731.157871-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman

bus: mhi: core: Fix race while handling SYS_ERR at power up

2022-01-27T11:01:22+00:00

commit d651ce8e917fa1bf6cfab8dca74c512edffc35d3 upstream. During SYS_ERR condition, as a response to the MHI_RESET from host, some devices tend to issue BHI interrupt without clearing the SYS_ERR state in the device. This creates a race condition and causes a failure in booting up the device. The issue is seen on the Sierra Wireless EM9191 modem during SYS_ERR handling in mhi_async_power_up(). Once the host detects that the device is in SYS_ERR state, it issues MHI_RESET and waits for the device to process the reset request. During this time, the device triggers the BHI interrupt to the host without clearing SYS_ERR condition. So the host starts handling the SYS_ERR condition again. To fix this issue, let's register the IRQ handler only after handling the SYS_ERR check to avoid getting spurious IRQs from the device. Fixes: e18d4e9fa79b ("bus: mhi: core: Handle syserr during power_up") Cc: stable@vger.kernel.org Reported-by: Aleksander Morgado Tested-by: Aleksander Morgado Tested-by: Thomas Perrot Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20211216081227.237749-8-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman

bus: mhi: core: Fix reading wake_capable channel configuration

2022-01-27T11:01:22+00:00

commit 42c4668f7efe1485dfc382517b412c0c6ab102b8 upstream. The 'wake-capable' entry in channel configuration is not set when parsing the configuration specified by the controller driver. Add the missing entry to ensure channel is correctly specified as a 'wake-capable' channel. Link: https://lore.kernel.org/r/1638320491-13382-1-git-send-email-quic_bbhatt@quicinc.com Fixes: 0cbf260820fa ("bus: mhi: core: Add support for registering MHI controllers") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam Signed-off-by: Bhaumik Bhatt Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20211216081227.237749-7-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman

bus: mhi: pci_generic: Graceful shutdown on freeze

2022-01-27T11:01:22+00:00

commit f77097ec8c0141a4b5cf3722a246be0cb5677e29 upstream. There is no reason for shutting down MHI ungracefully on freeze, this causes the MHI host stack & device stack to not be aligned anymore since the proper MHI reset sequence is not performed for ungraceful shutdown. Link: https://lore.kernel.org/r/1635268180-13699-1-git-send-email-loic.poulain@linaro.org Fixes: 5f0c2ee1fe8d ("bus: mhi: pci-generic: Fix hibernation") Cc: stable@vger.kernel.org Suggested-by: Bhaumik Bhatt Reviewed-by: Bhaumik Bhatt Reviewed-by: Hemant Kumar Reviewed-by: Manivannan Sadhasivam Signed-off-by: Loic Poulain Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20211216081227.237749-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'sunxi-drivers-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

2021-12-17T15:04:54+00:00

Some new drivers changes for the Allwinner SoCs, fixing the shutdown path of the RSB driver * tag 'sunxi-drivers-for-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: bus: sunxi-rsb: Fix shutdown Link: https://lore.kernel.org/r/6f2f75ad-de62-49a4-82a4-8655a567a09e.lettre@localhost Signed-off-by: Arnd Bergmann

bus: mhi: core: Add support for forced PM resume

2021-12-09T17:47:05+00:00

For whatever reason, some devices like QCA6390, WCN6855 using ath11k are not in M3 state during PM resume, but still functional. The mhi_pm_resume should then not fail in those cases, and let the higher level device specific stack continue resuming process. Add an API mhi_pm_resume_force(), to force resuming irrespective of the current MHI state. This fixes a regression with non functional ath11k WiFi after suspend/resume cycle on some machines. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=214179 Link: https://lore.kernel.org/regressions/871r5p0x2u.fsf@codeaurora.org/ Fixes: 020d3b26c07a ("bus: mhi: Early MHI resume failure in non M3 state") Cc: stable@vger.kernel.org #5.13 Reported-by: Kalle Valo Reported-by: Pengyu Ma Tested-by: Kalle Valo Acked-by: Kalle Valo Signed-off-by: Loic Poulain [mani: Switched to API, added bug report, reported-by tags and CCed stable] Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20211209131633.4168-1-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman