kernel/git/stable/linux.git/drivers/char/tpm, branch linux-5.8.y

tpm: Unify the mismatching TPM space buffer sizes

2020-08-19T06:27:01+00:00

commit 6c4e79d99e6f42b79040f1a33cd4018f5425030b upstream. The size of the buffers for storing context's and sessions can vary from arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be enough for most use with three handles (that is how many we allow at the moment). Parametrize the buffer size while doing this, so that it is easier to revisit this later on if required. Cc: stable@vger.kernel.org Reported-by: Stefan Berger Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Reviewed-by: Jerry Snitselaar Tested-by: Stefan Berger Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

Revert commit e918e570415c ("tpm_tis: Remove the HID IFX0102")

2020-07-07T01:25:17+00:00

Removing IFX0102 from tpm_tis was not a right move because both tpm_tis and tpm_infineon use the same device ID. Revert the commit and add a remark about a bug caused by commit 93e1b7d42e1e ("[PATCH] tpm: add HID module parameter"). Fixes: e918e570415c ("tpm_tis: Remove the HID IFX0102") Reported-by: Peter Huewe Reviewed-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen

tpm_tis: Remove the HID IFX0102

2020-07-02T14:49:00+00:00

Acer C720 running Linux v5.3 reports this in klog: tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16) tpm tpm0: tpm_try_transmit: send(): error -5 tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts tpm_tis tpm_tis: Could not get TPM timeouts and durations tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16) tpm tpm0: tpm_try_transmit: send(): error -5 tpm tpm0: A TPM error (-5) occurred attempting to determine the timeouts tpm_tis 00:08: Could not get TPM timeouts and durations ima: No TPM chip found, activating TPM-bypass! tpm_inf_pnp 00:08: Found TPM with ID IFX0102 % git --no-pager grep IFX0102 drivers/char/tpm drivers/char/tpm/tpm_infineon.c: {"IFX0102", 0}, drivers/char/tpm/tpm_tis.c: {"IFX0102", 0}, /* Infineon */ Obviously IFX0102 was added to the HID table for the TCG TIS driver by mistake. Fixes: 93e1b7d42e1e ("[PATCH] tpm: add HID module parameter") Link: https://bugzilla.kernel.org/show_bug.cgi?id=203877 Cc: stable@vger.kernel.org Cc: Kylene Jo Hall Reported-by: Ferry Toth: Reviewed-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen

tpm_tis_spi: Prefer async probe

2020-07-02T14:49:00+00:00

On a Chromebook I'm working on I noticed a big (~1 second) delay during bootup where nothing was happening. Right around this big delay there were messages about the TPM: [ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2 [ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ... I put a few printouts in and saw that tpm_tis_spi_init() (specifically tpm_chip_register() in that function) was taking the lion's share of this time, though ~115 ms of the time was in cr50_print_fw_version(). Let's make a one-line change to prefer async probe for tpm_tis_spi. There's no reason we need to block other drivers from probing while we load. NOTES: * It's possible that other hardware runs through the init sequence faster than Cr50 and this isn't such a big problem for them. However, even if they are faster they are still doing _some_ transfers over a SPI bus so this should benefit everyone even if to a lesser extent. * It's possible that there are extra delays in the code that could be optimized out. I didn't dig since once I enabled async probe they no longer impacted me. Signed-off-by: Douglas Anderson Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: ibmvtpm: Wait for ready buffer before probing for TPM2 attributes

2020-07-02T14:49:00+00:00

The tpm2_get_cc_attrs_tbl() call will result in TPM commands being issued, which will need the use of the internal command/response buffer. But, we're issuing this *before* we've waited to make sure that buffer is allocated. This can result in intermittent failures to probe if the hypervisor / TPM implementation doesn't respond quickly enough. I find it fails almost every time with an 8 vcpu guest under KVM with software emulated TPM. To fix it, just move the tpm2_get_cc_attrs_tlb() call after the existing code to wait for initialization, which will ensure the buffer is allocated. Fixes: 18b3670d79ae9 ("tpm: ibmvtpm: Add support for TPM2") Signed-off-by: David Gibson Reviewed-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm/st33zp24: fix spelling mistake "drescription" -> "description"

2020-07-02T14:49:00+00:00

Trivial fix, the spelling of "drescription" is incorrect in function comment. Fix this. Signed-off-by: Binbin Zhou Acked-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm_tis: extra chip->ops check on error path in tpm_tis_core_init

2020-07-02T14:49:00+00:00

Found by smatch: drivers/char/tpm/tpm_tis_core.c:1088 tpm_tis_core_init() warn: variable dereferenced before check 'chip->ops' (see line 979) 'chip->ops' is assigned in the beginning of function in tpmm_chip_alloc->tpm_chip_alloc and is used before first possible goto to error path. Signed-off-by: Vasily Averin Reviewed-by: Jerry Snitselaar Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm_tis_spi: Don't send anything during flow control

2020-07-02T14:48:59+00:00

During flow control we are just reading from the TPM, yet our spi_xfer has the tx_buf and rx_buf both non-NULL which means we're requesting a full duplex transfer. SPI is always somewhat of a full duplex protocol anyway and in theory the other side shouldn't really be looking at what we're sending it during flow control, but it's still a bit ugly to be sending some "random" data when we shouldn't. The default tpm_tis_spi_flow_control() tries to address this by setting 'phy->iobuf[0] = 0'. This partially avoids the problem of sending "random" data, but since our tx_buf and rx_buf both point to the same place I believe there is the potential of us sending the TPM's previous byte back to it if we hit the retry loop. Another flow control implementation, cr50_spi_flow_control(), doesn't address this at all. Let's clean this up and just make the tx_buf NULL before we call flow_control(). Not only does this ensure that we're not sending any "random" bytes but it also possibly could make the SPI controller behave in a slightly more optimal way. NOTE: no actual observed problems are fixed by this patch--it's was just made based on code inspection. Signed-off-by: Douglas Anderson Reviewed-by: Paul Menzel Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

tpm: Fix TIS locality timeout problems

2020-07-02T14:48:59+00:00

It has been reported that some TIS based TPMs are giving unexpected errors when using the O_NONBLOCK path of the TPM device. The problem is that some TPMs don't like it when you get and then relinquish a locality (as the tpm_try_get_ops()/tpm_put_ops() pair does) without sending a command. This currently happens all the time in the O_NONBLOCK write path. Fix this by moving the tpm_try_get_ops() further down the code to after the O_NONBLOCK determination is made. This is safe because the priv->buffer_mutex still protects the priv state being modified. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206275 Fixes: d23d12484307 ("tpm: fix invalid locking in NONBLOCKING mode") Reported-by: Mario Limonciello Tested-by: Alex Guzman Cc: stable@vger.kernel.org Reviewed-by: Jerry Snitselaar Signed-off-by: James Bottomley Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada