kernel/git/stable/linux.git/drivers/clk/bcm, branch linux-4.7.y

clk: bcm/kona: Do not use sizeof on pointer type

2016-05-06T18:06:44+00:00

When sizeof is applied to a pointer typed expression, it gives the size of the pointer. So, here do not use sizeof on pointer type. Also, silent checkpatch.pl by using kmalloc_array over kmalloc. Note that this has no effect on runtime because 'parent_names' is a pointer to a pointer. Problem found using Coccinelle. Signed-off-by: Vaishali Thakkar Signed-off-by: Stephen Boyd

clk: bcm2835: Fix PLL poweron

2016-04-20T01:56:17+00:00

In poweroff, we set the reset bit and the power down bit, but only managed to unset the reset bit for poweron. This meant that if HDMI did -EPROBE_DEFER after it had grabbed its clocks, we'd power down the PLLH (that had been on at boot time) and never recover. Signed-off-by: Eric Anholt Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd

clk: bcm2835: Fix compiler warnings on 64-bit builds

2016-04-20T01:56:16+00:00

Signed-off-by: Eric Anholt Signed-off-by: Stephen Boyd

clk: bcm2835: add missing osc and per clocks

2016-03-17T17:42:17+00:00

Add AVE0, DFT, GP0, GP1, GP2, SLIM, SMI, TEC, DPI, CAM0, CAM1, DSI0E, and DSI1E. PULSE is not added because it has an extra divider. Signed-off-by: Martin Sperl Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt

clk: bcm2835: add missing PLL clock dividers

2016-03-17T17:42:17+00:00

Signed-off-by: Martin Sperl Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt

clk: bcm2835: enable management of PCM clock

2016-03-17T17:42:17+00:00

Enable the PCM clock in the SOC, which is used by the bcm2835-i2s driver. Signed-off-by: Martin Sperl Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt

clk: bcm2835: reorganize bcm2835_clock_array assignment

2016-03-17T17:42:17+00:00

Reorganize bcm2835_clock_array so that there is no more need for separate bcm2835_*_data structures to be defined. Instead the required structures are generated inline via helper macros. To allow this to also work for pll alone it was required that the parent_pll was changed from a pointer to bcm2835_pll_data to the name of the pll instead. Signed-off-by: Martin Sperl Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt

clk: bcm2835: remove use of BCM2835_CLOCK_COUNT in driver

2016-03-17T17:42:17+00:00

As the use of BCM2835_CLOCK_COUNT in include/dt-bindings/clock/bcm2835.h is frowned upon as it needs to get modified every time a new clock gets introduced this patch changes the clk-bcm2835 driver to use a different scheme for registration of clocks and pll, so that there is no more need for BCM2835_CLOCK_COUNT to be defined. Signed-off-by: Martin Sperl Signed-off-by: Eric Anholt Reviewed-by: Eric Anholt

clk: bcm2835: expose raw clock-registers via debugfs

2016-03-17T17:42:17+00:00

For debugging purposes under some circumstance it helps to be able to see the actual clock registers. E.g: when looking at the clock divider it is helpful to see what the actual clock divider is. This patch exposes all the clock registers specific to each clock/pll/pll-divider via debugfs. Signed-off-by: Martin Sperl Signed-off-by: Eric Anholt Acked-by: Eric Anholt

clk: bcm2835: clean up coding style issues

2016-03-17T17:42:17+00:00

Fix all the checkpatch complaints for clk-bcm2835.c Signed-off-by: Martin Sperl Signed-off-by: Eric Anholt