kernel/git/stable/linux.git/drivers/clk/qcom, branch linux-5.5.y

clk: qcom: rpmh: Sort OF match table

2020-03-05T15:45:24+00:00

commit 9e0cda721d18f44f1cd74d3a426931d71c1f1b30 upstream. sc7180 was added to the end of the match table, sort the table. Fixes: eee28109f871 ("clk: qcom: clk-rpmh: Add support for RPMHCC for SC7180") Signed-off-by: Bjorn Andersson Link: https://lkml.kernel.org/r/20200124175934.3937473-1-bjorn.andersson@linaro.org Signed-off-by: Stephen Boyd Signed-off-by: Greg Kroah-Hartman

clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk

2020-02-24T07:38:19+00:00

[ Upstream commit db2c7c0a04b11753f5741d00b784b5380ddeee72 ] gcc_bimc_gfx_clk is a required clock for booting the GPU and GPU SMMU. Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support) Signed-off-by: Jeffrey Hugo Link: https://lkml.kernel.org/r/20191217164913.4783-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: smd: Add missing bimc clock

2020-02-24T07:38:17+00:00

[ Upstream commit 87ec9adcca71801a44ddb311185b17df09839ab5 ] It turns out booting the modem is dependent on a bimc vote from Linux on msm8998. To make the modem happy, add the bimc clock to rely on the default vote from rpmcc. Once we have interconnect support, bimc should be controlled properly. Fixes: 6131dc81211c ("clk: qcom: smd: Add support for MSM8998 rpm clocks") Signed-off-by: Jeffrey Hugo Link: https://lkml.kernel.org/r/20191217165409.4919-1-jeffrey.l.hugo@gmail.com Reviewed-by: Bjorn Andersson Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: rcg2: Don't crash if our parent can't be found; return an error

2020-02-24T07:38:10+00:00

[ Upstream commit 908b050114d8fefdddc57ec9fbc213c3690e7f5f ] When I got my clock parenting slightly wrong I ended up with a crash that looked like this: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... pc : clk_hw_get_rate+0x14/0x44 ... Call trace: clk_hw_get_rate+0x14/0x44 _freq_tbl_determine_rate+0x94/0xfc clk_rcg2_determine_rate+0x2c/0x38 clk_core_determine_round_nolock+0x4c/0x88 clk_core_round_rate_nolock+0x6c/0xa8 clk_core_round_rate_nolock+0x9c/0xa8 clk_core_set_rate_nolock+0x70/0x180 clk_set_rate+0x3c/0x6c of_clk_set_defaults+0x254/0x360 platform_drv_probe+0x28/0xb0 really_probe+0x120/0x2dc driver_probe_device+0x64/0xfc device_driver_attach+0x4c/0x6c __driver_attach+0xac/0xc0 bus_for_each_dev+0x84/0xcc driver_attach+0x2c/0x38 bus_add_driver+0xfc/0x1d0 driver_register+0x64/0xf8 __platform_driver_register+0x4c/0x58 msm_drm_register+0x5c/0x60 ... It turned out that clk_hw_get_parent_by_index() was returning NULL and we weren't checking. Let's check it so that we don't crash. Fixes: ac269395cdd8 ("clk: qcom: Convert to clk_hw based provider APIs") Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke Link: https://lkml.kernel.org/r/20200203103049.v4.1.I7487325fe8e701a68a07d3be8a6a4b571eca9cfa@changeid Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin

clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()

2020-02-24T07:38:10+00:00

[ Upstream commit 21e157c62eeded8b1558a991b4820b761d48a730 ] The DFS frequency table logic overwrites 'cfg' while detecting the parent clk and then later on in clk_rcg2_dfs_populate_freq() we use that same variable to figure out the mode of the clk, either MND or not. Add a new variable to hold the parent clk bit so that 'cfg' is left untouched for use later. This fixes problems in detecting the supported frequencies for any clks in DFS mode. Fixes: cc4f6944d0e3 ("clk: qcom: Add support for RCG to register for DFS") Reported-by: Rajendra Nayak Signed-off-by: Stephen Boyd Link: https://lkml.kernel.org/r/20200128193329.45635-1-sboyd@kernel.org Tested-by: Rajendra Nayak Signed-off-by: Sasha Levin

clk: qcom: gcc-sdm845: Add missing flag to votable GDSCs

2020-01-05T20:02:21+00:00

On sdm845 devices, during boot we see the following warnings (unless we have added 'pd_ignore_unused' to the kernel command line): hlos1_vote_mmnoc_mmu_tbu_sf_gdsc status stuck at 'on' hlos1_vote_mmnoc_mmu_tbu_hf1_gdsc status stuck at 'on' hlos1_vote_mmnoc_mmu_tbu_hf0_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_tbu2_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_tbu1_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_pcie_tbu_gdsc status stuck at 'on' hlos1_vote_aggre_noc_mmu_audio_tbu_gdsc status stuck at 'on' As the name of these GDSCs suggests, they are "votable" and in downstream DT, they all have the property "qcom,no-status-check-on-disable", which means that we should not poll the status bit when we disable them. Luckily the VOTABLE flag already exists and it does exactly what we need, so let's make use of it to make the warnings disappear. Fixes: 06391eddb60a ("clk: qcom: Add Global Clock controller (GCC) driver for SDM845") Reported-by: Rob Clark Signed-off-by: Georgi Djakov Link: https://lkml.kernel.org/r/20191126153437.11808-1-georgi.djakov@linaro.org Tested-by: Rob Clark Signed-off-by: Stephen Boyd

clk: qcom: Avoid SMMU/cx gdsc corner cases

2019-12-19T06:02:27+00:00

Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid corner cases with SMMU per hardware documentation. Fixes: 3f7df5baa259 ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver") Signed-off-by: Jeffrey Hugo Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd

clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCs

2019-12-19T05:35:58+00:00

Commit 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") sets the VOTABLE flag in .pwrsts, but it needs to be set in .flags, fix this. Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Matthias Kaehlcke Link: https://lkml.kernel.org/r/20191204120341.1.I9971817e83ee890d1096c43c5a6ce6ced53d5bd3@changeid Signed-off-by: Stephen Boyd

Merge branch 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux

2019-12-05T19:21:24+00:00

Pull thermal management updates from Zhang Rui: - Fix a deadlock regression in thermal core framework, which was introduced in 5.3 (Wei Wang) - Initialize thermal control framework earlier to enable thermal mitigation during boot (Amit Kucheria) - Convert the Intelligent Power Allocator (IPA) thermal governor to follow the generic PM_EM instead of its own Energy Model (Quentin Perret) - Introduce a new Amlogic soc thermal driver (Guillaume La Roque) - Add interrupt support for tsens thermal driver (Amit Kucheria) - Add support for MSM8956/8976 in tsens thermal driver (AngeloGioacchino Del Regno) - Add support for r8a774b1 in rcar thermal driver (Biju Das) - Add support for Thermal Monitor Unit v2 in qoriq thermal driver (Yuantian Tang) - Some other fixes/cleanups on thermal core framework and soc thermal drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao) * 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits) thermal: Fix deadlock in thermal thermal_zone_device_check thermal: cpu_cooling: Migrate to using the EM framework thermal: cpu_cooling: Make the power-related code depend on IPA PM / EM: Declare EM data types unconditionally arm64: defconfig: Enable CONFIG_ENERGY_MODEL drivers: thermal: tsens: fix potential integer overflow on multiply thermal: cpu_cooling: Reorder the header file thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF thermal: no need to set .owner when using module_platform_driver thermal: qcom: tsens-v1: Fix kfree of a non-pointer value cpufreq: qcom-hw: Move driver initialization earlier clk: qcom: Initialize clock drivers earlier cpufreq: Initialize cpufreq-dt driver earlier cpufreq: Initialize the governors in core_initcall thermal: Initialize thermal subsystem earlier thermal: Remove netlink support dt: thermal: tsens: Document compatible for MSM8976/56 thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976 MAINTAINERS: add entry for Amlogic Thermal driver thermal: amlogic: Add thermal driver to support G12 SoCs ...

clk: qcom: rpmh: Reuse sdm845 clks for sm8150

2019-11-08T21:07:04+00:00

The SM8150 list of clks is almost the same as the list for SDM845, except there isn't an IPA clk. Just point to the SDM845 clks from the SM8150 list for now so we can reduce the amount of struct bloat in this driver. Suggested-by: Vinod Koul Cc: Taniya Das Signed-off-by: Stephen Boyd Link: https://lkml.kernel.org/r/20191107214018.184105-1-sboyd@kernel.org Reviewed-by: Vinod Koul