kernel/git/stable/linux.git/drivers/clk/qcom, branch linux-6.7.y

clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays

2024-04-03T13:11:14+00:00

[ Upstream commit e2c02a85bf53ae86d79b5fccf0a75ac0b78e0c96 ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: d8b212014e69 ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)") Signed-off-by: Gabor Juhos Reviewed-by: Stephen Boyd Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-7-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays

2024-04-03T13:11:14+00:00

[ Upstream commit a903cfd38d8dee7e754fb89fd1bebed99e28003d ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: 2b46cd23a5a2 ("clk: qcom: Add APQ8084 Multimedia Clock Controller (MMCC) support") Signed-off-by: Gabor Juhos Reviewed-by: Stephen Boyd Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-6-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays

2024-04-03T13:11:14+00:00

[ Upstream commit bd2b6395671d823caa38d8e4d752de2448ae61e1 ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: d75b82cff488 ("clk: qcom: Add Global Clock Controller driver for IPQ9574") Signed-off-by: Gabor Juhos Reviewed-by: Stephen Boyd Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-4-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays

2024-04-03T13:11:14+00:00

[ Upstream commit 1040ef5ed95d6fd2628bad387d78a61633e09429 ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: 9607f6224b39 ("clk: qcom: ipq8074: add PCIE, USB and SDCC clocks") Signed-off-by: Gabor Juhos Reviewed-by: Stephen Boyd Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-3-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays

2024-04-03T13:11:14+00:00

[ Upstream commit cdbc6e2d8108bc47895e5a901cfcaf799b00ca8d ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested. Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support") Signed-off-by: Gabor Juhos Reviewed-by: Stephen Boyd Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-2-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays

2024-04-03T13:11:14+00:00

[ Upstream commit 90ad946fff70f312b8d23226afc38c13ddd88c4b ] The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018") Signed-off-by: Gabor Juhos Reviewed-by: Stephen Boyd Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240229-freq-table-terminator-v1-1-074334f0905c@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-sdm845: Add soft dependency on rpmhpd

2024-04-03T13:11:06+00:00

[ Upstream commit 1d9054e3a4fd36e2949e616f7360bdb81bcc1921 ] With the addition of RPMh power domain to the GCC node in device tree, we noticed a significant delay in getting the UFS driver probed on AOSP which futher led to mount failures because Android do not support rootwait. So adding a soft dependency on RPMh power domain which informs modprobe to load rpmhpd module before gcc-sdm845. Cc: stable@vger.kernel.org # v5.4+ Fixes: 4b6ea15c0a11 ("arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC") Suggested-by: Manivannan Sadhasivam Signed-off-by: Amit Pundir Reviewed-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240123062814.2555649-1-amit.pundir@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset

2024-03-26T22:18:41+00:00

[ Upstream commit 7d474b43087aa356d714d39870c90d77fc6f1186 ] The current register offset used for the GCC_UBI0_AXI_ARES reset seems wrong. Or at least, the downstream driver uses [1] the same offset which is used for other the GCC_UBI0_*_ARES resets. Change the code to use the same offset used in the downstream driver and also specify the reset bit explicitly to use the same format as the followup entries. 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L3773 Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018") Signed-off-by: Gabor Juhos Reviewed-by: Dmitry Baryshkov Reviewed-by: Kathiravan Thirumoorthy Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-3-3c191404d9f0@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'

2024-03-26T22:18:41+00:00

[ Upstream commit 11b752ac5a07cbfd95592fac5237a02f45662926 ] The following table shows the values of the 'halt_reg' and the 'enable_reg' fields from the pcie clocks defined in the current driver: clock halt_reg enable_reg gcc_pcie0_ahb_clk 0x75010 0x75010 gcc_pcie0_aux_clk 0x75014 0x75014 gcc_pcie0_axi_m_clk 0x75008 0x75008 gcc_pcie0_axi_s_bridge_clk 0x75048 0x75048 gcc_pcie0_axi_s_clk 0x7500c 0x7500c gcc_pcie0_pipe_clk 0x75018 0x75018 gcc_pcie1_ahb_clk 0x76010 0x76010 gcc_pcie1_aux_clk 0x76014 0x76014 gcc_pcie1_axi_m_clk 0x76008 0x76008 gcc_pcie1_axi_s_bridge_clk 0x76048 0x76048 gcc_pcie1_axi_s_clk 0x7600c 0x7600c gcc_pcie1_pipe_clk 8* 0x76018 Based on the table, it is quite likely that the pcie0 and the pci1 clocks are using the same register layout, however it seems that the value of the 'halt_reg' field in the 'gcc_pcie1_pipe_clk' clock is wrong. In the downstream driver [1], the same '0x76018' value is used for both the 'halt_reg' and for the 'enable_reg' fields of the 'gcc_pcie1_pipe_clk' clock. Update the current driver to use the same value used downstream as probably that is the correct value. 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L2316 Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018") Signed-off-by: Gabor Juhos Reviewed-by: Dmitry Baryshkov Reviewed-by: Kathiravan Thirumoorthy Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-2-3c191404d9f0@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'

2024-03-26T22:18:41+00:00

[ Upstream commit f982adcc1b1c02a3114f68ac73c811cbfabe90fa ] The value of the 'enable_reg' field in the 'gcc_gmac0_sys_clk' clock definition seems wrong as it is greater than the 'max_register' value defined in the regmap configuration. Additionally, all other gmac specific branch clock definitions within the driver uses the same value both for the 'enable_reg' and for the 'halt_reg' fields. Due to the lack of documentation the correct value is not known. Looking into the downstream driver does not help either, as that uses the same (presumably wrong) value [1]. Nevertheless, change the 'enable_reg' field of 'gcc_gmac0_sys_clk' to use the value from the 'halt_reg' field so it follows the pattern used in other gmac clock definitions. The change is based on the assumption that the register layout of this clock is the same as the other gmac clocks. 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4.r4/drivers/clk/qcom/gcc-ipq5018.c?ref_type=heads#L1889 Fixes: e3fdbef1bab8 ("clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018") Signed-off-by: Gabor Juhos Reviewed-by: Dmitry Baryshkov Reviewed-by: Kathiravan Thirumoorthy Link: https://lore.kernel.org/r/20240225-gcc-ipq5018-register-fixes-v1-1-3c191404d9f0@gmail.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin