kernel/git/stable/linux.git/drivers/dma/qcom, branch linux-5.19.y

dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg

2022-10-24T07:56:47+00:00

commit b9d2140c3badf4107973ad77c5a0ec3075705c85 upstream. The calling convention for pre_slave_sg is to return NULL on error and provide an error log to the system. Qcom-adm instead provide error pointer when an error occur. This indirectly cause kernel panic for example for the nandc driver that checks only if the pointer returned by device_prep_slave_sg is not NULL. Returning an error pointer makes nandc think the device_prep_slave_sg function correctly completed and makes the kernel panics later in the code. While nandc is the one that makes the kernel crash, it was pointed out that the real problem is qcom-adm not following calling convention for that function. To fix this, drop returning error pointer and return NULL with an error log. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Fixes: 5c9f8c2dbdbe ("dmaengine: qcom: Add ADM driver") Signed-off-by: Christian Marangi Cc: stable@vger.kernel.org # v5.11+ Link: https://lore.kernel.org/r/20220916041256.7104-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: qcom-adm: fix wrong sizeof config in slave_config

2022-10-24T07:56:47+00:00

commit 7c8765308371be30f50c1b5b97618b731514b207 upstream. Fix broken slave_config function that uncorrectly compare the peripheral_size with the size of the config pointer instead of the size of the config struct. This cause the crci value to be ignored and cause a kernel panic on any slave that use adm driver. To fix this, compare to the size of the struct and NOT the size of the pointer. Fixes: 03de6b273805 ("dmaengine: qcom-adm: stop abusing slave_id config") Signed-off-by: Christian Marangi Cc: stable@vger.kernel.org # v5.17+ Reviewed-by: Arnd Bergmann Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220915204844.3838-1-ansuelsmth@gmail.com Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

dmaengine: qcom: bam_dma: fix runtime PM underflow

2022-07-01T11:03:36+00:00

Commit dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled") caused unbalanced pm_runtime_get/put() calls when the bam is controlled remotely. This commit reverts it and just enables pm_runtime in all cases, the clk_* functions already just nop when the clock is NULL. Also clean up a bit by removing unnecessary bamclk null checks. Suggested-by: Stephan Gerhold Fixes: dbad41e7bb5f ("dmaengine: qcom: bam_dma: check if the runtime pm enabled") Signed-off-by: Caleb Connolly Link: https://lore.kernel.org/r/20220629140559.118537-1-caleb.connolly@linaro.org Signed-off-by: Vinod Koul

dmaengine: qcom: gpi: Add support for sc7280

2022-05-19T18:13:40+00:00

Add compatible and driver_data for GPI DMA engines found in Qualcomm SC7280. The driver_data contains ee_offset of 0x10000. Signed-off-by: Vinod Koul Link: https://lore.kernel.org/r/20220421121733.1829350-1-vkoul@kernel.org Signed-off-by: Vinod Koul

dmaengine: hidma: In hidma_prep_dma_memset treat value as a single byte

2022-04-20T11:58:12+00:00

The value parameter is a single byte, so duplicate it to the 8 byte range that is used as the pattern. Signed-off-by: Ben Walker Cc: Sinan Kaya Link: https://lore.kernel.org/r/20220301182551.883474-5-benjamin.walker@intel.com Signed-off-by: Vinod Koul

dmaengine: qcom: gpi: Add SM8350 support

2022-04-13T12:25:36+00:00

The Qualcomm SM8350 platform does, like the SM8450, provide a set of GPI controllers with an ee-offset of 0x10000. Add this to the driver. Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220412212959.2385085-1-bjorn.andersson@linaro.org Signed-off-by: Vinod Koul

dmaengine: qcom: gpi: Add support for ee_offset

2022-04-13T12:24:39+00:00

Controller on newer SoCs like SM8450 have registers at at offset. Add ee_offset to driver_data and add this compatible for the driver. Signed-off-by: Vinod Koul Reviewed-by: Bjorn Andersson Tested-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220406132508.1029348-3-vkoul@kernel.org Signed-off-by: Vinod Koul

dmaengine: qcom: gpi: set chain and link flag for duplex

2022-04-13T12:24:39+00:00

Newer platforms seem to have strict requirement for TRE flags which causes transaction to timeout. This was resolved to missing chain and link flag for duplex spi transaction. So add these two flags. Signed-off-by: Vinod Koul Reviewed-by: Bjorn Andersson Tested-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220406132508.1029348-1-vkoul@kernel.org Signed-off-by: Vinod Koul

dmaengine: qcom_hidma: Remove useless DMA-32 fallback configuration

2022-03-11T09:53:23+00:00

As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. Simplify code and remove some dead code accordingly. [1]: https://lore.kernel.org/linux-kernel/YL3vSPK5DXTNvgdx@infradead.org/#t Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/4deb32b0c7838da66608022c584326eb01d0da03.1642232106.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul

Merge tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine

2022-01-18T12:03:34+00:00

Pull dmaengine updates from Vinod Koul: "A bunch of new support and few updates to drivers: New support: - DMA_MEMCPY_SG support is bought back as we have a user in Xilinx driver - Support for TI J721S2 SoC in k3-udma driver - Support for Ingenic MDMA and BDMA in the JZ4760 - Support for Renesas r8a779f0 dmac Updates: - We are finally getting rid of slave_id, so this brings in the changes across tree for that - updates for idxd driver - at_xdmac driver cleanup" * tag 'dmaengine-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits) dt-bindings: dma-controller: Split interrupt fields in example dmaengine: pch_dma: Remove usage of the deprecated "pci-dma-compat.h" API dmaengine: at_xdmac: Fix race over irq_status dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_tasklet() dmaengine: at_xdmac: Fix at_xdmac_lld struct definition dmaengine: at_xdmac: Fix lld view setting dmaengine: at_xdmac: Remove a level of indentation in at_xdmac_advance_work() dmaengine: at_xdmac: Fix concurrency over xfers_list dmaengine: at_xdmac: Move the free desc to the tail of the desc list dmaengine: at_xdmac: Fix race for the tx desc callback dmaengine: at_xdmac: Fix concurrency over chan's completed_cookie dmaengine: at_xdmac: Print debug message after realeasing the lock dmaengine: at_xdmac: Start transfer for cyclic channels in issue_pending dmaengine: at_xdmac: Don't start transactions at tx_submit level dmaengine: idxd: deprecate token sysfs attributes for read buffers dmaengine: idxd: change bandwidth token to read buffers dmaengine: idxd: fix wq settings post wq disable dmaengine: idxd: change MSIX allocation based on per wq activation dmaengine: idxd: fix descriptor flushing locking dmaengine: idxd: embed irq_entry in idxd_wq struct ...