kernel/git/stable/linux.git/drivers/gpio/Kconfig, branch linux-4.8.y

gpio: mcp23s08: make driver depend on OF_GPIO

2016-09-07T22:42:57+00:00

The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein Cc: Phil Reid Reported-by: kbuild test robot Signed-off-by: Linus Walleij

gpio: make any OF dependent driver depend on OF_GPIO

2016-08-19T13:01:29+00:00

The drivers that depend on OF but not OF_GPIO are wreaking havoc with the autobuilders for archs that have all requirements for OF but not for OF_GPIO, particularly the UM (Usermode) arch does not have iomem (NO_IOMEM) which result in configuring GPIOLIB but without OF_GPIO which is wrong if the driver is using the .of_node of the gpiochip, which only appears with OF_GPIO. After a brief look at the drivers just depending on OF it seems most if not all of them actually require stuff from gpiolib-of so the dependency is wrong in the first place. This simply patches the Kconfig so that all GPIO drivers using OF depend on OF_GPIO rather than just OF. Cc: Rabin Vincent Cc: Pramod Gurav Cc: Andreas Larsson Cc: Gregory CLEMENT Cc: Thierry Reding Cc: Laxman Dewangan Cc: Alexandre Courbot Cc: Geert Uytterhoeven Cc: Phil Reid Signed-off-by: Linus Walleij

gpio: Fix OF build problem on UM

2016-08-19T13:01:25+00:00

The UserMode (UM) Linux build was failing in gpiolib-of as it requires ioremap()/iounmap() to exist, which is absent from UM. The non-existence of IO memory is negatively defined as CONFIG_NO_IOMEM which means we need to depend on HAS_IOMEM. Cc: stable@vger.kernel.org Cc: Geert Uytterhoeven Reported-by: kbuild test robot Signed-off-by: Linus Walleij

Merge tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

2016-07-27T02:16:01+00:00

Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.8 kernel cycle. The big news is the completion of the chardev ABI which I'm very happy about and apart from that it's an ordinary, quite busy cycle. The details are below. The patches are tested in linux-next for some time, patches to other subsystem mostly have ACKs. I got overly ambitious with configureing lines as input for IRQ lines but it turns out that some controllers have their interrupt-enable and input-enabling in orthogonal settings so the assumption that all IRQ lines are input lines does not hold. Oh well, revert and back to the drawing board with that. Core changes: - The big item is of course the completion of the character device ABI. It has now replaced and surpassed the former unmaintainable sysfs ABI: we can now hammer (bitbang) individual lines or sets of lines and read individual lines or sets of lines from userspace, and we can also register to listen to GPIO events from userspace. As a tie-in we have two new tools in tools/gpio: gpio-hammer and gpio-event-mon that illustrate the proper use of the new ABI. As someone said: the wild west days of GPIO are now over. - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB Kconfig symbols. I'm patching hexagon, openrisc, powerpc, sh, unicore, ia64 and microblaze. These are either ACKed by their maintainers or patched anyways after a grace period and no response from maintainers. Some archs (ARM) come in from their trees, and others (x86) are still not fixed, so I might send a second pull request to root it out later in this merge window, or just defer to v4.9. - The GPIO tools are moved to the tools build system. New drivers: - New driver for the MAX77620/MAX20024. - New driver for the Intel Merrifield. - Enabled PCA953x for the TI PCA9536. - Enabled PCA953x for the Intel Edison. - Enabled R8A7792 in the RCAR driver. Driver improvements: - The STMPE and F7188x now supports the .get_direction() callback. - The Xilinx driver supports setting multiple lines at once. - ACPI support for the Vulcan GPIO controller. - The MMIO GPIO driver supports device tree probing. - The Acer One 10 is supported through the _DEP ACPI attribute. Cleanups: - A major cleanup of the OF/DT support code. It is way easier to read and understand now, probably this improves performance too. - Drop a few redundant .owner assignments. - Remove CLPS711x boardfile support: we are 100% DT" * tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits) MAINTAINERS: Add INTEL MERRIFIELD GPIO entry gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata() gpio: merrifield: Protect irq_ack() and gpio_set() by lock gpio: merrifield: Introduce GPIO driver to support Merrifield gpio: intel-mid: Make it depend to X86_INTEL_MID gpio: intel-mid: Sort header block alphabetically gpio: intel-mid: Remove potentially harmful code gpio: rcar: add R8A7792 support gpiolib: remove duplicated include from gpiolib.c Revert "gpio: convince line to become input in irq helper" gpiolib: of_find_gpio(): Don't discard errors gpio: of: Allow overriding the device node gpio: free handles in fringe cases gpio: tps65218: Add platform_device_id table gpio: max77620: get gpio value based on direction gpio: lynxpoint: avoid potential warning on error path tools/gpio: add install section tools/gpio: move to tools buildsystem gpio: intel-mid: switch to devm_gpiochip_add_data() gpio: 74x164: Use spi_write() helper instead of open coding ...

gpio: merrifield: Introduce GPIO driver to support Merrifield

2016-07-22T13:30:41+00:00

Intel Merrifield platform has a special GPIO controller to drive pads when they are muxed in corresponding mode. Intel Merrifield GPIO IP is slightly different here and there in comparison to the older Intel MID platforms. These differences include in particular the shaked register offsets, specific support of level triggered interrupts and wake capable sources, as well as a pinctrl which is a separate IP. Instead of uglifying existing driver I decide to provide a new one slightly based on gpio-intel-mid.c. So, anyone can easily compare what changes are happened to be here. Signed-off-by: Andy Shevchenko Acked-by: Brian J Wood Reviewed-by: Mika Westerberg Signed-off-by: Linus Walleij

gpio: intel-mid: Make it depend to X86_INTEL_MID

2016-07-22T13:30:41+00:00

This GPIO controller is a part of Intel MID platforms which are somehow different to pure PCs. Thus, there is no need that driver is compiled for them. Replace dependency to X86_INTEL_MID. While here, fix capitalization of MID abbreviation. Signed-off-by: Andy Shevchenko Reviewed-by: Mika Westerberg Signed-off-by: Linus Walleij

gpio: tegra: don't auto-enable for COMPILE_TEST

2016-07-22T13:29:32+00:00

I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij

Revert "gpio: gpiolib-of: Allow compile testing"

2016-07-05T17:03:04+00:00

This reverts commit 1e4a80640338924b9f9fd7a121ac31d08134410a. This creates more problems than it solves right now. Compile testing needs to go in with patches fixing the problems it uncovers. Signed-off-by: Linus Walleij

gpio: Allow PC/104 devices on X86_64

2016-06-18T03:21:12+00:00

With the introduction of the ISA_BUS_API Kconfig option, ISA-style drivers may be built for X86_64 architectures. This patch changes the ISA Kconfig option dependency of the PC/104 drivers to ISA_BUS_API, thus allowing them to build for X86_64 as they are expected to. Cc: Alexandre Courbot Reviewed-by: Guenter Roeck Signed-off-by: William Breathitt Gray Acked-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

gpio: select ANON_INODES

2016-06-08T11:47:37+00:00

The build servers found that gpiolib is using ANON_INODES but has forgotten to select it. Fix this. Reported-by: kbuild test robot Fixes: 521a2ad6f862 ("gpio: add userspace ABI for GPIO line information") Signed-off-by: Linus Walleij