kernel/git/stable/linux.git/drivers/gpio/gpio-sim.c, branch linux-7.2.y

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

Merge tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2026-06-16T02:00:52+00:00

Pull gpio updates from Bartosz Golaszewski: "There's one new driver, one legacy driver removed, a kunit test-suite for the GPIO core, support for new models in existing drivers and a slew of various changes in many places though I can't think of anything controversial that would stand out - it's been a relatively calm cycle. GPIO core: - Add an initial set of kunit test cases for the GPIO subsystem - Use the devres owner as the GPIO chip's parent in absence of any other parent - Fix const-correctness of GPIO chip SRCU guards - Provide new GPIO consumer interfaces: gpiod_is_single_ended() and fwnode_gpiod_get() - Quarantine all legacy GPIO APIs in linux/gpio/legacy.h - Use __ro_after_init where applicable New drivers: - Add driver for the GPIO controller on Waveshare DSI TOUCH panels Removed drivers: - Remove the obsolete ts5500 GPIO driver Driver updates: - Modernize gpio-timberdale: remove platform data support and use generic device property accessors - Extend test build coverage by enabling COMPILE_TEST for more GPIO drivers - Add some missing dependencies in Kconfig - Add support for sparse fixed direction to gpio-regmap - Remove dead code from gpio-nomadik - use BIT() in gpio-mxc - use bitmap_complement() in gpio-xilinx and gpio-pca953x - Use more appropriate printing functions where applicable - Use named initializers for platform_device_id and i2c_device_id arrays - Convert gpio-altera to using the generic GPIO chip helper library - Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and gpio-tegra186 - Unify the naming convention for Qualcomm in GPIO drivers - Fix interrupt bank mapping to GPIO chips in gpio-mt7621 - Add support for the lines-initial-states property to gpio-74x164 - Switch to using dynamic GPIO base in gpio-ixp4xx - Move the handling of an OF quirk from ASoC to gpiolib-of.c where other such quirks live - Use handle_bad_irq() in gpio-ep93xx - Some other minor tweaks and refactorings Devicetree bindings: - Document the Waveshare GPIO controller for DSI TOUCH panels - Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in gpio-zynq - Add new properties for gpio-dwapb and fairchild,74hc595 - Fix whitespace issues - Sort compatibles alphabetically in gpio-zynq Documentation: - Fix kerneldoc warnings in gpio-realtek-otto Misc: - Attach software nodes representing GPIO chips to the actual struct device objects associated with them in some legacy platforms enabling real firmware node lookup instead of string matching - Drop unneeded dependencies on OF_GPIO from bus and staging drivers" * tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits) gpio: nomadik: remove dead DB8540 code from gpio: mt7621: fix interrupt banks mapping on gpio chips bus: ts-nbus: drop unneeded dependency on OF_GPIO staging: media: max96712: drop unneeded dependency on OF_GPIO gpiolib: Replace strcpy() with memcpy() gpio: remove obsolete UAF FIXMEs from lookup paths gpio: core: fix const-correctness of gpio_chip_guard gpio: mxc: use BIT() macro gpio: realtek-otto: fix kernel-doc warnings gpio: max77620: Unify usage of space and comma in platform_device_id array gpio: Use named initializers for platform_device_id arrays gpio: cros-ec: Drop unused assignment of platform_device_id driver data ARM: omap1: enable real software node lookup of GPIOs on Nokia 770 ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx ARM: omap1: drop unused variable from omap16xx_gpio_init() gpio: gpiolib: use seq_puts() for plain strings gpio: ts5500: remove obsolete driver gpio: add kunit test cases for the GPIO subsystem kunit: provide kunit_platform_device_unregister() kunit: provide kunit_platform_device_register_full() ...

gpio: sim: lock device when calling device_is_bound()

2026-05-21T12:36:06+00:00

The kerneldoc for device_is_bound() says it must be called with the device lock taken. Add missing synchronization to this driver. Fixes: 7fb3287946f9 ("gpio: sim: stop using dev-sync-probe") Link: https://patch.msgid.link/20260518-gpio-dev-lock-v1-1-cc4736f3ff0b@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski

gpio: sim: Replace sprintf() with sysfs_emit()

2026-04-29T07:50:04+00:00

Replace sprintf() function calls with sysfs_emit() in the configfs show callbacks. This will help harden the driver and will bring the driver up-to-date with more modern functions. Suggested-by: Bartosz Golaszewski Signed-off-by: Maxwell Doose Link: https://patch.msgid.link/20260428113439.9783-1-m32285159@gmail.com Signed-off-by: Bartosz Golaszewski

gpio: sim: stop using dev-sync-probe

2026-04-07T10:32:27+00:00

dev-err-probe is an overengineered solution to a simple problem. Use a combination of wait_for_probe() and device_is_bound() to synchronously wait for the platform device to probe. Reviewed-by: Linus Walleij Link: https://patch.msgid.link/20260327-gpio-kill-dev-sync-probe-v1-1-efac254f1a1d@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski

gpio: sim: allow to define the active-low setting of a simulated hog

2026-03-16T08:51:07+00:00

Add a new configfs attribute to the hog group allowing to configure the active-low lookup flag for hogged lines. This will allow us to extend tests to also cover the line config of hogs set up using software nodes. Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-6-4e61f3dbf06a@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski

gpio: sim: use fwnode-based GPIO hogs

2026-03-16T08:51:06+00:00

Convert gpio-sim to using software nodes for setting up simulated hogs instead of legacy machine hogs. Reviewed-by: Linus Walleij Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20260309-gpio-hog-fwnode-v2-3-4e61f3dbf06a@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00+00:00

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_obj' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This was done entirely with mindless brute force, using git grep -l '\

treewide: Replace kmalloc with kmalloc_obj for non-scalar types

2026-02-21T09:02:28+00:00

This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook