kernel/git/stable/linux.git/drivers/hid/hid-uclogic.c, branch master

HID: uclogic: Extract report descriptors to a module

2019-02-21T11:00:53+00:00

As hid-uclogic has a lot of report descriptors already and there's going to be more, move them out of the driver code and into a separate module. Signed-off-by: Nikolai Kondrashov Signed-off-by: Benjamin Tissoires

HID: Clarify vendor ID reuse by Ugee tablets

2019-02-21T11:00:53+00:00

Add "_UCLOGIC" to Ugee tablet device ID macros so it's clear they come with UC-Logic vendor ID. Signed-off-by: Nikolai Kondrashov Signed-off-by: Benjamin Tissoires

HID: core: remove the need for HID_QUIRK_NO_EMPTY_INPUT

2018-03-23T14:44:57+00:00

There is no real point of registering an empty input node. This should be default, but given some drivers need the blank input node to set it up during input_configured, we need to postpone the check for hidinput_has_been_populated(). Signed-off-by: Benjamin Tissoires Acked-by: Peter Hutterer Signed-off-by: Jiri Kosina

HID: uclogic: add support for Ugee Tablet EX07S

2017-04-06T12:50:11+00:00

This device has a different vendor id but responds to initialization. Signed-off-by: Xiaolei Yu Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: uclogic: Add support for UC-Logic TWHA60 v3

2016-09-19T12:32:24+00:00

Add support for the third version of UC-Logic TWHA60, which has three interfaces and responds to initialization. Signed-off-by: Nikolai Kondrashov Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: uclogic: Override constant descriptors

2016-09-19T12:32:24+00:00

Make uclogic_report_fixup override constant descriptors with generated descriptors, so models reusing product ID, but working with generated descriptor get correct one. Signed-off-by: Nikolai Kondrashov Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: uclogic: Support UGTizer GP0610 partially

2016-09-19T12:32:23+00:00

Add partial support for the UGTizer GP0610 tablet (aka iBall PF1064U, aka UGTizer GT1060) to the hid-uclogic.c driver. The pen input is supported fully, but frame buttons and wheel don't work yet. Signed-off-by: Nikolai Kondrashov Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: uclogic: Add support for several more tablets

2016-09-19T12:32:23+00:00

Add more product IDs to hid-uclogic.c driver to support several more tablet models, including: UC-Logic DrawImage G3 aka Ugee G3 UC-Logic SP1001 aka Ugee SP1001 aka Yiynova UC-Logic SP-1001 Ugee 1000L Ugee M708 Yiynova DP10U aka Yiynova DP10U+ Yiynova MSP19U Yiynova MSP19U+ Yiynova MVP10U aka Yiynova MVP10U IPS Yiynova MVP10UHD+IPS Yiynova MVP22U+ Signed-off-by: Nikolai Kondrashov Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: uclogic: Switch to reporting abstract button events

2016-09-19T12:32:23+00:00

Based on a patch from: Nikolai Kondrashov Enable abstract keyboard mode for Huion tablets, which makes them report frame buttons using the pen interface and report ID. Divert these reports to a virtual report ID describing them. This makes the tablet compatible with xf86-input-wacom and libinput, but stops the frame buttons from reporting keyboard events. Signed-off-by: Nikolai Kondrashov Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina

HID: uclogic: Remove allocation failure messages

2016-09-19T12:32:22+00:00

Remove unnecessary allocation failure messages from hid-uclogic.c, following the checkpatch.pl recommendations. Signed-off-by: Nikolai Kondrashov Reviewed-by: Benjamin Tissoires Signed-off-by: Jiri Kosina