kernel/git/stable/linux.git/drivers/hid/i2c-hid, branch master

HID: i2c-hid: Add a quirk for a Cirque I2C device.

2026-08-25T08:49:04+00:00

Cirque touchpads with PID D0C1 generate an error when probed by the I2C HID driver, resulting in no hidraw device created. Adding I2C_HID_QUIRK_NO_IRQ_AFTER_RESET fixes the issue. Signed-off-by: Vadim Klishko Signed-off-by: Benjamin Tissoires

Merge branch 'for-7.3/i2c-hid' into for-linus

2026-08-19T07:23:42+00:00

- add support for devices that provide HID descriptor solely through ACPI _DSM method (XIE Zhibang)

Merge branch 'for-7.3/steam' into for-linus

2026-08-19T07:16:28+00:00

- initial support for 2026 Steam Controller (Vicki Pfau) - support for sensor events on the 2025 Steam Controller (Vicki Pfau) - assorted fixes, improvements and code refactoring (Vicki Pfau)

HID: i2c-hid: goodix: Disable VDD on VDDIO enable failure

2026-08-03T19:19:28+00:00

If enabling VDDIO fails after VDD has been enabled, the power-up path returns without disabling VDD. This leaves the regulator enabled and its enable count unbalanced. Disable VDD before returning the VDDIO error. Fixes: eb16f59e8e58 ("HID: i2c-hid: goodix: Add mainboard-vddio-supply") Signed-off-by: Chao Huang Reviewed-by: Douglas Anderson Signed-off-by: Jiri Kosina

HID: i2c-hid: Fix "(null)" output when reading report descriptor fails

2026-08-03T18:52:06+00:00

When i2c-hid fails to read the HID report descriptor during device initialization, the error message prints as: hid (null): reading report descriptor failed The HID device name is set in hid_add_device() after calling hdev->ll_driver->parse(), so when i2c_hid_parse() fails and calls hid_err(), the device name has not been set yet, resulting in "(null)" output. Use dev_err(&client->dev, ...) instead of hid_err(hid, ...) because the I2C client device is fully initialized with a proper name, providing meaningful error messages for debugging. Before: hid (null): reading report descriptor failed After: i2c_hid i2c-TPD0001:00: reading report descriptor failed Fixes: 4a200c3b9a40 ("HID: i2c-hid: introduce HID over i2c specification implementation") Signed-off-by: Ai Chao Reviewed-by: Mario Limonciello (AMD) Signed-off-by: Jiri Kosina

HID: i2c-hid: Refactor _DSM helper and add i2c-hid-acpi-prp0001 driver

2026-08-03T17:31:14+00:00

Move the _DSM call that gets the HID descriptor address from i2c-hid-acpi.c into i2c-hid-acpi.h as a static inline so both the ACPI and the new PRP0001 driver can use it. While refactoring, move the blacklist check and the _DSM call to the top of probe() to avoid a pointless alloc when the device is blacklisted or does not implement the _DSM. Some devices, for example the Lenovo KaiTian N60d and Inspur CP300L3, are declared with _HID "PRP0001" and _DSD compatible "hid-over-i2c" but lack "hid-descr-addr" from the _DSD and provide the HID descriptor address only through an ACPI _DSM. The OF driver fails to probe them because it requires hid-descr-addr. Add a new driver that handles these devices by calling the shared _DSM helper. Link: https://lore.kernel.org/tencent_F6FC553D1BB737FC00062AD0FEF43C580F0A@qq.com Fixes: b33752c30023 ("HID: i2c-hid: Reorganize so ACPI and OF are separate modules") Signed-off-by: 谢致邦 (XIE Zhibang) Signed-off-by: Jiri Kosina

Replace by more specific (c files)

2026-07-03T05:38:17+00:00

Replace the #include of by the more specific where applicable. For most cases the include can be dropped completely, only a few drivers need one or two headers added. Acked-by: Danilo Krummrich Acked-by: Takashi Sakamoto Acked-by: Bjorn Helgaas Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com Signed-off-by: Uwe Kleine-König (The Capable Hub)

HID: i2c-hid-of: Use named initializers for struct i2c_device_id

2026-06-01T16:26:14+00:00

While being less compact, using named initializers allows to more easily see which members of the structs are assigned which value without having to lookup the declaration of the struct. And it's also more robust against changes to the struct definition. This patch doesn't modify the compiled array, only its representation in source form benefits. The former was confirmed with x86 and arm64 builds. Signed-off-by: Uwe Kleine-König (The Capable Hub) Signed-off-by: Benjamin Tissoires

Merge tag 'hid-for-linus-2026051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid

2026-05-14T21:30:01+00:00

Pull HID fixes from Jiri Kosina: - fixes for a few OOB/UAF in several HID drivers (Florian Pradines, Lee Jones, Michael Zaidman, Rosalie Wanders, Sangyun Kim and Tomasz Pakuła) - more general sanitation of input data, dealing with potentially malicious hardware in hid-core (Benjamin Tissoires) - a few device-specific quirks and fixups * tag 'hid-for-linus-2026051401' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits) HID: logitech-hidpp: Add support for newer Bluetooth keyboards HID: pidff: Fix integer overflow in pidff_rescale HID: i2c-hid: add reset quirk for BLTP7853 touchpad HID: core: introduce hid_safe_input_report() HID: pass the buffer size to hid_report_raw_event HID: google: hammer: stop hardware on devres action failure HID: appletb-kbd: run inactivity autodim from workqueues HID: appletb-kbd: fix UAF in inactivity-timer cleanup path HID: playstation: Clamp num_touch_reports HID: magicmouse: Prevent out-of-bounds (OOB) read during DOUBLE_REPORT_ID HID: mcp2221: fix OOB write in mcp2221_raw_event() HID: quirks: really enable the intended work around for appledisplay HID: hid-sjoy: race between init and usage HID: uclogic: Fix regression of input name assignment HID: intel-thc-hid: Intel-quickspi: Fix some error codes HID: hid-lenovo-go-s: restore OS_TYPE after resume from s2idle HID: elan: Add support for ELAN SB974D touchpad HID: sony: add missing size validation for Rock Band 3 Pro instruments HID: sony: add missing size validation for SMK-Link remotes HID: sony: remove unneeded WARN_ON() in sony_leds_init() ...

HID: i2c-hid: add reset quirk for BLTP7853 touchpad

2026-05-12T16:11:43+00:00

The BLTP7853 I2C HID touchpad may fail to probe after reboot or reprobe because reset completion is not signalled to the host. The driver then waits for the reset-complete interrupt until it times out and the device probe fails: i2c_hid i2c-BLTP7853:00: failed to reset device. i2c_hid i2c-BLTP7853:00: can't add hid device: -61 i2c_hid: probe of i2c-BLTP7853:00 failed with error -61 Add I2C_HID_QUIRK_NO_IRQ_AFTER_RESET for the device so i2c-hid does not wait for a reset interrupt that may never arrive. Signed-off-by: Xu Rao Signed-off-by: Jiri Kosina