kernel/git/stable/linux.git/drivers/hwmon/Makefile, branch linux-6.3.y

Merge tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

2023-02-22T19:31:09+00:00

Pull hwmon updates from Guenter Roeck: "New drivers: - Infineon TDA38640 Voltage Regulator - NXP MC34VR500 PMIC - GXP fan controller - MPQ7932 Power Management IC New chip or board support added to existing drivers: - it87: IT87952E; also other cleanup/improvements - intel-m10-bmc-hwmon: N6000 - pmbus/max16601: MAX16600 - aquacomputer_d5next: Aquacomputer Aquastream Ultimate, Aquacomputer Poweradjust 3, Aquacomputer Aquaero - nct6775: Support for B650/B660/X670 ASUS boards - oxp-sensors: AYANEO AIR and AIR Pro Other notable changes: - Various kernel documentation fixes - Various devicetree bindings fixes - Explicitly deprecated [devm_]hwmon_device_register_with_groups - ftsteutates: Support for fanX_fault and other cleanup - ltc2945: Support for setting shunt resistor and other cleanup/fixes - coretemp: Avoid RDMSR interrupts to isolated CPUs, and simplify platform device handling ... and various other minor cleanups and fixes" * tag 'hwmon-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (66 commits) hwmon: Deprecate [devm_]hwmon_device_register_with_groups hwmon: (mlxreg-fan) Return zero speed for broken fan hwmon: (gxp-fan-ctrl) use devm_platform_get_and_ioremap_resource() hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream Ultimate hwmon: (aquacomputer_d5next) Add support for Aquacomputer Poweradjust 3 hwmon: (iio_hwmon) use dev_err_probe hwmon: intel-m10-bmc-hwmon: Add N6000 sensors Docs/hwmon/index: Add missing SPDX License Identifier hwmon: (it87) Updated documentation for recent updates to it87 hwmon: (it87) Add new chipset IT87952E hwmon: (it87) Allow multiple chip IDs for force_id hwmon: (it87) Add chip_id in some info message hwmon: (it87) List full chip model name hwmon: (it87) Disable configuration exit for certain chips hwmon: (it87) Allow disabling exiting of configuration mode Documentation: hwmon: correct spelling hwmon: (pmbus/max16601) Add support for MAX16600 hwmon: (ltc2945) Allow setting shunt resistor hwmon: (ltc2945) Handle error case in ltc2945_value_store hwmon: (ltc2945) Add devicetree match table ...

hwmon: add initial NXP MC34VR500 PMIC monitoring support

2023-02-03T15:30:10+00:00

Add initial monitoring support for the MC34VR500 PMIC. In its current state, input voltage and temperature alarms are reported to hwmon. Datasheet: - https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf Signed-off-by: Mario Kicherer Link: https://lore.kernel.org/r/20230118123019.3041303-4-dev@kicherer.org [groeck: Silence stray compiler warning, terminate struct of_device_id] Signed-off-by: Guenter Roeck

hwmon: (gxp-fan-ctrl) Add GXP fan controller

2023-02-03T15:30:09+00:00

The GXP SoC can support up to 16 fans through the interface provided by the CPLD. The current support is limited to 8 fans. The fans speeds are controlled via 8 different PWMs which can vary in value from 0-255. The fans are also capable of reporting if they have failed to the CPLD which in turn reports the status to the GXP SoC. Signed-off-by: Nick Hawkins Link: https://lore.kernel.org/r/20230103203654.59322-2-nick.hawkins@hpe.com [groeck: Improved alignment of defined, added missing include linux/bits.h] Signed-off-by: Guenter Roeck

hwmon: remove s3c driver

2023-01-16T08:26:05+00:00

The s3c adc driver was removed along with the s3c24xx platform, so the hwmon driver is orphaned and can be removed. Acked-by: Guenter Roeck Signed-off-by: Arnd Bergmann

hwmon: add OneXPlayer mini AMD sensors driver

2022-12-05T00:45:02+00:00

Sensors driver for OXP Handhelds from One-Netbook that expose fan reading and control via hwmon sysfs. As far as I could gather all OXP boards have the same DMI strings and they can be told appart only by the boot cpu vendor (Intel/AMD). Currently only AMD boards are supported since Intel have different EC registers and values to read/write. Fan control is provided via pwm interface in the range [0-255]. AMD boards have [0-100] as range in the EC, the written value is scaled to accommodate for that. Signed-off-by: Joaquín Ignacio Aramendía Link: https://lore.kernel.org/r/20221104140659.593608-1-samsagax@gmail.com [groeck: Removed misleading comment about module_platform_driver()] Signed-off-by: Guenter Roeck

hwmon: Add Ampere's Altra smpro-hwmon driver

2022-12-05T00:45:02+00:00

This commit adds support for Ampere SMpro hwmon driver. This driver supports accessing various CPU sensors provided by the SMpro co-processor including temperature, power, voltages, and current. Signed-off-by: Quan Nguyen Link: https://lore.kernel.org/r/20220929094321.770125-2-quan@os.amperecomputing.com Signed-off-by: Guenter Roeck

drivers: hwmon: Add max31760 fan speed controller driver

2022-09-20T14:10:58+00:00

MAX31760 is a precision fan speed controller with nonvolatile lookup table. Device has one internal and one external temperature sensor support. Controls two fans and measures their speeds. Generates hardware alerts when programmable max and critical temperatures are exceeded. Signed-off-by: Ibrahim Tilki Reviewed-by: Nurettin Bolucu Link: https://lore.kernel.org/r/20220910171945.48088-2-Ibrahim.Tilki@analog.com Signed-off-by: Guenter Roeck

hwmon: (emc2305) add support for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller.

2022-09-19T13:17:06+00:00

Add driver for Microchip EMC2301/2/3/5 RPM-based PWM Fan Speed Controller. Modify Makefile and Kconfig to support Microchip EMC2305 RPM-based PWM Fan Speed Controller. Signed-off-by: Michael Shych Reviewed-by: Vadim Pasternak Link: https://lore.kernel.org/r/20220810171552.56417-3-michaelsh@nvidia.com [groeck: Drop unnecessary () around DIV_ROUND_CLOSEST()] Signed-off-by: Guenter Roeck

hwmon: (asus_wmi_ec_sensors) remove driver

2022-09-19T13:17:05+00:00

This driver utilises a WMI interface found in AMD 500 series ASUS boards, to read EC registers. But it turned out that ASUS abandoned the interface, as it disappeared from Intel 600 series boards. Additionally, the WMI interface was incredibly slow. Therefore this driver was deprecated in favor of the asus_ec_sensors driver, which supports more boards, more sensors, and is faster. Signed-off-by: Eugene Shalygin Link: https://lore.kernel.org/r/20220720072016.102086-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck

hwmon: (nct6775) Add i2c driver

2022-05-22T18:32:31+00:00

This driver provides an i2c I/O mechanism for the core nct6775 driver, as might be used by a BMC. Because the Super I/O chip is shared with the host CPU in such a scenario (and the host should ultimately be in control of it), the i2c driver is strictly read-only to avoid interfering with any usage by the host (aside from the bank-select register, which seems to be replicated for the i2c interface). Signed-off-by: Zev Weiss Tested-by: Renze Nicolai Link: https://lore.kernel.org/r/20220428012707.24921-3-zev@bewilderbeest.net Signed-off-by: Guenter Roeck