kernel/git/stable/linux.git/drivers/hwmon, branch linux-5.12.y

hwmon: (max31790) Fix fan speed reporting for fan7..12

2021-07-14T14:59:35+00:00

[ Upstream commit cbbf244f0515af3472084f22b6213121b4a63835 ] Fans 7..12 do not have their own set of configuration registers. So far the code ignored that and read beyond the end of the configuration register range to get the tachometer period. This resulted in more or less random fan speed values for those fans. The datasheet is quite vague when it comes to defining the tachometer period for fans 7..12. Experiments confirm that the period is the same for both fans associated with a given set of configuration registers. Fixes: 54187ff9d766 ("hwmon: (max31790) Convert to use new hwmon registration API") Fixes: 195a4b4298a7 ("hwmon: Driver for Maxim MAX31790") Cc: Jan Kundrát Reviewed-by: Jan Kundrát Cc: Václav Kubernát Reviewed-by: Jan Kundrát Signed-off-by: Guenter Roeck Link: https://lore.kernel.org/r/20210526154022.3223012-2-linux@roeck-us.net Signed-off-by: Sasha Levin

hwmon: (max31722) Remove non-standard ACPI device IDs

2021-07-14T14:59:35+00:00

[ Upstream commit 97387c2f06bcfd79d04a848d35517b32ee6dca7c ] Valid Maxim Integrated ACPI device IDs would start with MXIM, not with MAX1. On top of that, ACPI device IDs reflecting chip names are almost always invalid. Remove the invalid ACPI IDs. Fixes: 04e1e70afec6 ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors") Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (lm70) Revert "hwmon: (lm70) Add support for ACPI"

2021-07-14T14:59:35+00:00

[ Upstream commit ac61c8aae446b9c0fe18981fe721d4a43e283ad6 ] This reverts commit b58bd4c6dfe709646ed9efcbba2a70643f9bc873. None of the ACPI IDs introduced with the reverted patch is a valid ACPI device ID. Any ACPI users of this driver are advised to use PRP0001 and a devicetree-compatible device identification. Fixes: b58bd4c6dfe7 ("hwmon: (lm70) Add support for ACPI") Cc: Andrej Picej Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (max31790) Fix pwmX_enable attributes

2021-07-14T14:59:21+00:00

[ Upstream commit 148c847c9e5a54b99850617bf9c143af9a344f92 ] pwmX_enable supports three possible values: 0: Fan control disabled. Duty cycle is fixed to 0% 1: Fan control enabled, pwm mode. Duty cycle is determined by values written into Target Duty Cycle registers. 2: Fan control enabled, rpm mode Duty cycle is adjusted such that fan speed matches the values in Target Count registers The current code does not do this; instead, it mixes pwm control configuration with fan speed monitoring configuration. Worse, it reports that pwm control would be disabled (pwmX_enable==0) when it is in fact enabled in pwm mode. Part of the problem may be that the chip sets the "TACH input enable" bit on its own whenever the mode bit is set to RPM mode, but that doesn't mean that "TACH input enable" accurately reflects the pwm mode. Fix it up and only handle pwm control with the pwmX_enable attributes. In the documentation, clarify that disabling pwm control (pwmX_enable=0) sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN is set together with RPM_MODE. While at it, only update the configuration register if the configuration has changed, and only update the cached configuration if updating the chip configuration was successful. Cc: Jan Kundrát Cc: Václav Kubernát Signed-off-by: Guenter Roeck Tested-by: Václav Kubernát Reviewed-by: Jan Kundrát Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net Signed-off-by: Sasha Levin

hwmon: (max31790) Report correct current pwm duty cycles

2021-07-14T14:59:21+00:00

[ Upstream commit 897f6339893b741a5d68ae8e2475df65946041c2 ] The MAX31790 has two sets of registers for pwm duty cycles, one to request a duty cycle and one to read the actual current duty cycle. Both do not have to be the same. When reporting the pwm duty cycle to the user, the actual pwm duty cycle from pwm duty cycle registers needs to be reported. When setting it, the pwm target duty cycle needs to be written. Since we don't know the actual pwm duty cycle after a target pwm duty cycle has been written, set the valid flag to false to indicate that actual pwm duty cycle should be read from the chip instead of using cached values. Cc: Jan Kundrát Cc: Václav Kubernát Signed-off-by: Guenter Roeck Tested-by: Václav Kubernát Reviewed-by: Jan Kundrát Link: https://lore.kernel.org/r/20210526154022.3223012-3-linux@roeck-us.net Signed-off-by: Sasha Levin

hwmon: (scpi-hwmon) shows the negative temperature properly

2021-06-23T12:44:04+00:00

[ Upstream commit 78d13552346289bad4a9bf8eabb5eec5e5a321a5 ] The scpi hwmon shows the sub-zero temperature in an unsigned integer, which would confuse the users when the machine works in low temperature environment. This shows the sub-zero temperature in an signed value and users can get it properly from sensors. Signed-off-by: Riwen Lu Tested-by: Xin Chen Link: https://lore.kernel.org/r/20210604030959.736379-1-luriwen@kylinos.cn Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon/pmbus: (q54sj108a2) The PMBUS_MFR_ID is actually 6 chars instead of 5

2021-06-18T08:02:49+00:00

[ Upstream commit f0fb26c456a30d6009faa2c9d44aa22f5bf88c90 ] The PMBUS_MFR_ID block is actually 6 chars for q54sj108a2. /sys/bus/i2c/drivers/q54sj108a2_test# iotools smbus_read8 $BUS $ADDR 0x99 0x06 Tested: Devices are able to bind to the q54sj108a2 driver successfully. Signed-off-by: Chu Lin Link: https://lore.kernel.org/r/20210517222606.3457594-1-linchuyuan@google.com Signed-off-by: Guenter Roeck Signed-off-by: Sasha Levin

hwmon: (tps23861) correct shunt LSB values

2021-06-16T10:05:13+00:00

commit e13d1127241404f1c3eb1379ac4dd100eaf385b4 upstream. Current shunt LSB values got reversed during in the original driver commit. So, correct the current shunt LSB values according to the datasheet. This caused reading slightly skewed current values. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20210609220728.499879-3-robert.marko@sartura.hr Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (tps23861) set current shunt value

2021-06-16T10:05:13+00:00

commit b325d3526e14942d42c392c2ac9fbea59c22894c upstream. TPS23861 has a configuration bit for setting of the current shunt value used on the board. Its bit 0 of the General Mask 1 register. According to the datasheet bit values are: 0 for 255 mOhm (Default) 1 for 250 mOhm So, configure the bit before registering the hwmon device according to the value passed in the DTS or default one if none is passed. This caused potentially reading slightly skewed values due to max current value being 1.02A when 250mOhm shunt is used instead of 1.0A when 255mOhm is used. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20210609220728.499879-2-robert.marko@sartura.hr Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

hwmon: (tps23861) define regmap max register

2021-06-16T10:05:13+00:00

commit fb8543fb863e89baa433b4d716d73395caa1b7f4 upstream. Define the max register address the device supports. This allows reading the whole register space via regmap debugfs, without it only register 0x0 is visible. This was forgotten in the original driver commit. Fixes: fff7b8ab2255 ("hwmon: add Texas Instruments TPS23861 driver") Signed-off-by: Robert Marko Link: https://lore.kernel.org/r/20210609220728.499879-1-robert.marko@sartura.hr Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman