kernel/git/stable/linux.git/drivers/ide/alim15x3.c, branch master

ide: remove the legacy ide driver

2021-06-16T14:53:58+00:00

The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

alim15x3: move irq-restore before pci_dev_put()

2018-06-05T20:26:46+00:00

init_chipset_ali15x3() initializes the chipset during init with disabled interrupts. There is no need to keep the interrupts disabled during pci_dev_put(). Move the irq-restore before pci_dev_put() is invoked. Side note: The same init is performed in drivers/ata/pata_ali.c::ali_init_chipset() without disabled interrupts. It looks that the same hardware is supported in the ATA land. Would it make sense to remove this driver since it is supported in the other subsystem? Signed-off-by: Sebastian Andrzej Siewior Acked-by: David S. Miller Signed-off-by: David S. Miller

Drivers: ide: remove __dev* attributes.

2013-01-03T23:57:03+00:00

CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton Cc: "David S. Miller" Signed-off-by: Greg Kroah-Hartman

sections: fix section conflicts in drivers/ide

2012-10-05T18:04:41+00:00

Signed-off-by: Andi Kleen Cc: David Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

alim15x3: fix handling of UDMA enable bit

2010-01-19T09:52:31+00:00

Clear UDMA enable bit also for PIO modes. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller

alim15x3: fix handling of DMA timings

2010-01-19T09:52:31+00:00

Stop depending on the BIOS setup. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller

alim15x3: fix handling of command timings

2010-01-19T09:52:30+00:00

Stop depending on the BIOS setup. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller

alim15x3: fix handling of address setup timings

2010-01-19T09:52:30+00:00

Account for the requirements of the other device on the port. Based on libata pata_ali host driver. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller

ide: change ->set_dma_mode method parameters

2010-01-19T09:45:29+00:00

Change ->set_dma_mode method parameters to match ->set_dmamode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz

ide: change ->set_pio_mode method parameters

2010-01-19T09:44:41+00:00

Change ->set_pio_mode method parameters to match ->set_piomode method used in struct ata_port_operations. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller