kernel/git/stable/linux.git/drivers/iio/accel, branch linux-4.5.y

iio: accel: bmc150: fix endianness when reading axes

2016-04-20T06:45:23+00:00

commit 2215f31dc6f88634c1916362e922b1ecdce0a6b3 upstream. For big endian platforms, reading the axes will return invalid values. The device stores each axis value in a 16 bit little endian register. The driver uses regmap_read_bulk to get the axis value, resulting in a 16 bit little endian value. This needs to be converted to cpu endianness to work on big endian platforms. Fix endianness for big endian platforms by converting the values for the axes read from little endian to cpu. This is also partially fixed in commit b6fb9b6d6552 ("iio: accel: bmc150: optimize transfers in trigger handler"). Signed-off-by: Irina Tirdea Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

Merge tag 'iio-fixes-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

2016-02-01T21:07:38+00:00

Jonathan writes: First set of IIO fixes for the 4.5 cycle. This set comprises those not dependent on patches in the 4.5 merge cycle. A second set will follow shortly with ones that are. * core in kernel interfaces - fix a possible NULL dereference that is a theoretical possibility via odd usage of iio_channel_release. Pretty much a hardening of the interface, but observed in the wild with the twl4030_charger driver. * acpi-als - report the data as processed as it is in lux. This fixes a wrong use of the IIO ABI. However, old _raw version retained to avoid breaking any userspace in the wild that is relying on that (none known but it doesn't hurt us much to retain it) * ade7753 - fix some error handling to avoid use of unitialized data. * ltr501 - use a signed return type for ltr501_match_samp_freq so as to allow returning of an error code. * mcp4725 - set name field of struct iio_dev to ensure the sysfs name attribute doesn't give NULL. * mpl115 - temperature offset sign is wrong. * stk8ba50 - IIO_TRIGGER dependency added * ti_am335x_adc - Label buffer as a software buffer. It's actually a hybrid of a true hardware buffer feeding a kfifo, but the meaning of these fields has changed a little recently and in this case it should be labeled a software buffer ensure it is allowed to use the kfifo. * vf610_adc - HAS_IOMEM dependency

iio: add IIO_TRIGGER dependency to STK8BA50

2016-01-04T11:36:19+00:00

Ran into this on UML: drivers/iio/accel/stk8ba50.c: In function ‘stk8ba50_data_rdy_trigger_set_state’: drivers/iio/accel/stk8ba50.c:163:9: error: implicit declaration of function ‘iio_trigger_get_drvdata’ [-Werror=implicit-function-declaration] iio_trigger_get_drvdata() is defined only when IIO_TRIGGER is selected. Signed-off-by: Vegard Nossum Cc: Signed-off-by: Jonathan Cameron

iio: mma8452: use enum for channel index

2015-12-19T16:45:42+00:00

This gets rid of some magic numbers by adding an enum. Signed-off-by: Martin Kepplinger Signed-off-by: Christoph Muellner Signed-off-by: Jonathan Cameron

iio: mma8452: remove unused register description

2015-12-19T16:44:56+00:00

Signed-off-by: Martin Kepplinger Signed-off-by: Christoph Muellner Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-4.5a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2015-12-01T17:13:29+00:00

Jonathan writes: First set of new device support, features and cleanups for IIO in the 4.5 cycle Usual mixed bag, but the big item perhaps in this series is the DMA buffer support added by Lars-Peter Clausen. It's been in the works for a long time and it will be interesting to see what hardware support shows up now that this is available. New core features + associate cleanup. * Add generic DMA buffer infrastructure * Add a DMAengine framework based buffer Also associated minor changes. - Set the device buffer watermark based on the minimum watermark for all attached buffers rather than just the 'primary' one. - iio_buffer_init - only set the watermark default if one hasn't already been provided. This allows simple support for devices with a fixed watermark. - read only attribute for watermark on fixed watermark devices. - add explicit buffer enable/disable callbacks to allow the buffer to do more than trivial actions when it is being turned on and off. * IIO_VAL_INT support in write_raw_get_fmt function. New device support * Freescale MMA7455/7456L accelerometers * Memsic MXC6255XC accelerometer * ST lis2dh12 accelerometer * TI ADS8688 ADC * TI Palamas (twl6035/7) gpadc New driver features * mma8452 - support either of the available interrupt pins to cope with the case where board layout has lead to a particular one being connected. Staging graduation * Dummy driver - this driver acts as both an example and a test device for those with out hardware to develop userspace code against. Cleanups and minor bits and bobs. * treewide - Sort out the ordering of iio_device_register/unregister vs runtime pm function calls so that it's all nice and consistent and not race prone. - Check sscanf return values. None of the cases will actually happen as the strings are supplied internally, but best to be consistent on this. * ad7780 - switch over to the gpio descriptor interface and remove the now unused platform data which gets rid of a header entirely. * ad7793 - drop a pointless else statement. * at91_adc - Swap kmalloc_array in for a kmalloc doing the same job. * dummy - get rid of some commented out lines that snuck in during the move of the driver. * lm3533-als - Print an error message on provision of an invalid resistance. * mcp320x - Add compatible strings with vendor prefix and deprecate those with no vendor prefix. * mxs-lradc - Use BIT macro in various places rather than shifted ones. * pa12203001 - Power off the chip if the registration fails. * pulsedlight-lidar-lite - add runtime PM support. * xilinx XADC - constify an iio_buffer_setup_ops structure.

iio: st-accel: add support for lis2dh12

2015-11-14T19:04:12+00:00

This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here: http://www.st.com/st-web-ui/static/active/en/resource/technical/ document/datasheet/DM00091513.pdf Signed-off-by: Giuseppe Barba Acked-by: Denis Ciocca Acked-by: Daniel Baluta Signed-off-by: Jonathan Cameron

iio: Reconcile operation order between iio_register/unregister and pm functions

2015-11-08T15:36:53+00:00

At probe, runtime pm should be setup before registering the sysfs interface so that all the power attributes are accurate and functional when registering. Also, when removing the device we should unregister first to make sure that the interfaces that may result in wakeups are no longer available. Fix this behaviour for the following drivers: bmc150, bmg160, kmx61, kxcj-1013, mma9551, mma9553, rpr0521. Signed-off-by: Adriana Reus Signed-off-by: Jonathan Cameron

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2015-11-05T21:15:12+00:00

Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...

Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next

2015-11-04T11:02:12+00:00