kernel/git/stable/linux.git/drivers/iio/adc, branch linux-3.18.y

iio: adc: xilinx: fix potential use-after-free on remove

2019-05-16T07:17:22+00:00

[ Upstream commit 62039b6aef63380ba7a37c113bbaeee8a55c5342 ] When cancel_delayed_work() returns, the delayed work may still be running. This means that the core could potentially free the private structure (struct xadc) while the delayed work is still using it. This is a potential use-after-free. Fix by calling cancel_delayed_work_sync(), which waits for any residual work to finish before returning. Signed-off-by: Sven Van Asbroeck Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: at91: disable adc channel interrupt in timeout case

2019-04-27T07:30:30+00:00

commit 09c6bdee51183a575bf7546890c8c137a75a2b44 upstream. Having a brief look at at91_adc_read_raw() it is obvious that in the case of a timeout the setting of AT91_ADC_CHDR and AT91_ADC_IDR registers is omitted. If 2 different channels are queried we can end up with a situation where two interrupts are enabled, but only one interrupt is cleared in the interrupt handler. Resulting in a interrupt loop and a system hang. Signed-off-by: Georg Ottinger Acked-by: Ludovic Desroches Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: select channel when reading register

2019-04-27T07:30:30+00:00

commit fccfb9ce70ed4ea7a145f77b86de62e38178517f upstream. The desired channel has to be selected in order to correctly fill the buffer with the corresponding data. The `ad_sd_write_reg()` already does this, but for the `ad_sd_read_reg_raw()` this was omitted. Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices") Signed-off-by: Dragos Bogdan Signed-off-by: Alexandru Ardelean Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: at91: fix wrong channel number in triggered buffer mode

2018-11-22T06:32:44+00:00

commit aea835f2dc8a682942b859179c49ad1841a6c8b9 upstream. When channels are registered, the hardware channel number is not the actual iio channel number. This is because the driver is probed with a certain number of accessible channels. Some pins are routed and some not, depending on the description of the board in the DT. Because of that, channels 0,1,2,3 can correspond to hardware channels 2,3,4,5 for example. In the buffered triggered case, we need to do the translation accordingly. Fixed the channel number to stop reading the wrong channel. Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard Signed-off-by: Eugen Hristev Acked-by: Ludovic Desroches Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: at91: fix acking DRDY irq on simple conversions

2018-11-22T06:32:44+00:00

commit bc1b45326223e7e890053cf6266357adfa61942d upstream. When doing simple conversions, the driver did not acknowledge the DRDY irq. If this irq status is not acked, it will be left pending, and as soon as a trigger is enabled, the irq handler will be called, it doesn't know why this status has occurred because no channel is pending, and then it will go int a irq loop and board will hang. To avoid this situation, read the LCDR after a raw conversion is done. Fixes: 0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.") Cc: Maxime Ripard Signed-off-by: Eugen Hristev Acked-by: Ludovic Desroches Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: xilinx: Fix error handling

2017-10-21T15:07:26+00:00

[ Upstream commit ca1c39ef76376b67303d01f94fe98bb68bb3861a ] Reorder error handling labels in order to match the way resources have been allocated. Signed-off-by: Christophe JAILLET Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

iio: adc: mcp320x: Fix oops on module unload

2017-10-12T07:18:02+00:00

commit 0964e40947a630a2a6f724e968246992f97bcf1c upstream. The driver calls spi_get_drvdata() in its ->remove hook even though it has never called spi_set_drvdata(). Stack trace for posterity: Unable to handle kernel NULL pointer dereference at virtual address 00000220 Internal error: Oops: 5 [#1] SMP ARM [<8072f564>] (mutex_lock) from [<7f1400d0>] (iio_device_unregister+0x24/0x7c [industrialio]) [<7f1400d0>] (iio_device_unregister [industrialio]) from [<7f15e020>] (mcp320x_remove+0x20/0x30 [mcp320x]) [<7f15e020>] (mcp320x_remove [mcp320x]) from [<8055a8cc>] (spi_drv_remove+0x2c/0x44) [<8055a8cc>] (spi_drv_remove) from [<805087bc>] (__device_release_driver+0x98/0x134) [<805087bc>] (__device_release_driver) from [<80509180>] (driver_detach+0xdc/0xe0) [<80509180>] (driver_detach) from [<8050823c>] (bus_remove_driver+0x5c/0xb0) [<8050823c>] (bus_remove_driver) from [<80509ab0>] (driver_unregister+0x38/0x58) [<80509ab0>] (driver_unregister) from [<7f15e69c>] (mcp320x_driver_exit+0x14/0x1c [mcp320x]) [<7f15e69c>] (mcp320x_driver_exit [mcp320x]) from [<801a78d0>] (SyS_delete_module+0x184/0x1d0) [<801a78d0>] (SyS_delete_module) from [<80108100>] (ret_fast_syscall+0x0/0x1c) Fixes: f5ce4a7a9291 ("iio: adc: add driver for MCP3204/08 12-bit ADC") Cc: Oskar Andero Signed-off-by: Lukas Wunner Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ad7793: Fix the serial interface reset

2017-10-12T07:18:02+00:00

commit 7ee3b7ebcb74714df6d94c8f500f307e1ee5dda5 upstream. The serial interface can be reset by writing 32 consecutive 1s to the device. 'ret' was initialized correctly but its value was overwritten when ad7793_check_platform_data() was called. Since a dedicated reset function is present now, it should be used instead. Fixes: 2edb769d246e ("iio:ad7793: Add support for the ad7798 and ad7799") Signed-off-by: Dragos Bogdan Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: ad_sigma_delta: Implement a dedicated reset function

2017-10-12T07:18:02+00:00

commit 7fc10de8d49a748c476532c9d8e8fe19e548dd67 upstream. Since most of the SD ADCs have the option of reseting the serial interface by sending a number of SCLKs with CS = 0 and DIN = 1, a dedicated function that can do this is usefull. Needed for the patch: iio: ad7793: Fix the serial interface reset Signed-off-by: Dragos Bogdan Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits

2017-08-16T20:35:31+00:00

commit d466d3c1217406b14b834335b5b4b33c0d45bd09 upstream. In order to select the alternate voltage reference pair (VALTH/VALTL), the right value for the REFSEL field in the ADCx_CFG register is "01", leading to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1]. [1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf Fixes: a775427632fd ("iio:adc:imx: add Freescale Vybrid vf610 adc driver") Signed-off-by: Stefan-Gabriel Mirea Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman