kernel/git/stable/linux.git/drivers/iio/adc, branch linux-4.2.y

iio: mcp320x: Fix NULL pointer dereference

2015-07-19T12:58:51+00:00

On reading in_voltage_scale of we got an NULL pointer dereference Oops. The reason for this is, that mcp320x_read_raw tries to access chip_info->resolution from struct mcp320x, but chip_info is never set. chip_info was never set since the driver was added, but there was no acute problem, because it was not referenced. The acute problem exists since b12206e917ac34bec41b9ff93d37d8bd53a2b3bc iio: adc: mcp320x. Add support for more ADCs This patch fixes the issue by setting chip_info in mcp320x_probe. Signed-off-by: Manfred Schlaegl Reviewed-by: Michael Welling Signed-off-by: Jonathan Cameron

iio: adc: vf610: fix the adc register read fail issue

2015-07-19T12:35:26+00:00

Read the register only when the adc register address is 4 byte aligned. (rather than the other way around). Signed-off-by: Haibo Chen Signed-off-by: Fugang Duan Cc: Signed-off-by: Jonathan Cameron

iio:adc:cc10001_adc: fix Kconfig dependency

2015-07-19T10:48:12+00:00

The Cosmic Circuits 10001 ADC driver depends on HAS_IOMEM, HAVE_CLK and REGULATOR together, not just any of these. Signed-off-by: Hartmut Knaack Cc: Signed-off-by: Jonathan Cameron

iio: adc: at91_adc: allow to use full range of startup time

2015-07-19T10:48:06+00:00

The DT-Property "atmel,adc-startup-time" is stored in an u8 for a microsecond value. When trying to increase the value of STARTUP in Register AT91_ADC_MR some higher values can't be reached. Change the type in function parameter and private structure field from u8 to u32. Signed-off-by: Jan Leupold [nicolas.ferre@atmel.com: change commit message, increase u16 to u32 for startup time] Signed-off-by: Nicolas Ferre Acked-by: Alexandre Belloni Cc: Signed-off-by: Jonathan Cameron

iio: twl4030-madc: Pass the IRQF_ONESHOT flag

2015-07-19T10:48:00+00:00

Since commit 1c6c69525b40 ("genirq: Reject bogus threaded irq requests") threaded IRQs without a primary handler need to be requested with IRQF_ONESHOT, otherwise the request will fail. So pass the IRQF_ONESHOT flag in this case. The semantic patch that makes this change is available in scripts/coccinelle/misc/irqf_oneshot.cocci. Signed-off-by: Fabio Estevam Cc: Signed-off-by: Jonathan Cameron

iio: adc: rockchip_saradc: add missing MODULE_* data

2015-07-19T10:47:58+00:00

The module-data is currently missing. This includes the license-information which makes the driver taint the kernel and miss symbols when compiled as module. Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc") Signed-off-by: Heiko Stuebner Cc: Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-v4.2c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2015-06-11T03:48:34+00:00

Jonathan writes: Third round of new IIO drivers, cleanups and functionality for the 4.2 cycle. Given Linus announced a 4.8rc coming up, hopefully time for one more lot of IIO patches this cycle. Some of these are actually improvements / fixes for patches earlier in the cycle. New device support * st_accel driver - support devices with 8 bit channels. Cleanup * A general cleanup of the iio tools under /tools/ from Hartmut. I'm more than a little embarassed by how bad some of these were! Are well, much more refined and less bug prone now. These cover lots of stuff like unhandled error returns, memory leaks as well as general refactoring to tidy the code up. * iio_simple_dummy - fix memory leaks in the init functions, drop some pointless error returns from functions that never generate errors and make the module parameter explicitly unsigned. * More buffer handling reworks from Lars-Peter, this time targetting hardware buffers (a little used corner that looks likely to get more use in the near future). Specifically: - Always compute the masklength as inkernel buffer users may need it. - Add a means of labeling which buffer modes a given buffer implementation supports. - In the case of hardware buffers, require strict scan matching rather than matching to a superset. Currently the demux is bypassed by these drivers (this may well not change for efficiency reasons) so allowing a superset of channels to be selected would otherwise lead to more data than requested confusing userspace. Driver funcationality improvments * mmc35240 - adds a compensation to the raw values as borrowed form Memsic's own input driver. * mma8452 - event support - event debouncing - high pass filter configuration - triggers * vf610 - allow conversion mode to be adjusted Fixlets * mmc35240 - Off by one error that by coincidence had no real effect. - i2c_device_name should be lowercase. - Lack of null terminator at end of attributes array. - Avoid computing the fractional part of the magnetic field by moving the scaling into userspace where floating point is available to simplify the maths. - Use a smaller sleep before assuming the measurement is done. This is safe and improves the possible polling rate. - Fix sensitivity on z-axis - datasheet disagrees with Memsic's releasedd code and the value used in the code seems to be correct. * stk3310 - make a local variable signed to ensure error handling works. * twl4030 - fix calculation of the temperature sense current - bug unlikely to have ever been noticed as the difference is small. - Fix errors in descriptions.

Merge 4.1-rc7 into staging-testing

2015-06-08T17:34:44+00:00

We want the staging tree fixes in here too to help with testing and merge issues. Signed-off-by: Greg Kroah-Hartman

iio: adc: vf610: implement configurable conversion modes

2015-06-07T16:53:25+00:00

Support configurable conversion mode through sysfs. So far, the mode used was low-power, which is enabled by default now. Beside that, the modes normal and high-speed are selectable as well. Use the new device tree property which specifies the maximum ADC conversion clock frequencies. Depending on the mode used, the available resulting conversion frequency are calculated dynamically. Acked-by: Fugang Duan Signed-off-by: Stefan Agner Signed-off-by: Jonathan Cameron

iio: adc: twl4030_madc: Fix description of twl4030_madc_set_current_generator()

2015-06-07T16:25:55+00:00

The @chan parameter can be 0 or 1 and not a bit mask. Fix wrong description. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Marek Belisko Signed-off-by: Jonathan Cameron