kernel/git/stable/linux.git/drivers/iio/addac/ad74115.c, branch master

iio: addac: ad74115: Use devm_mutex_init()

2026-04-27T08:58:22+00:00

Use devm_mutex_init() which is helpful with CONFIG_DEBUG_MUTEXES. Signed-off-by: David Carlier Signed-off-by: Jonathan Cameron

treewide: rename GPIO set callbacks back to their original names

2025-08-07T08:07:06+00:00

The conversion of all GPIO drivers to using the .set_rv() and .set_multiple_rv() callbacks from struct gpio_chip (which - unlike their predecessors - return an integer and allow the controller drivers to indicate failures to users) is now complete and the legacy ones have been removed. Rename the new callbacks back to their original names in one sweeping change. Signed-off-by: Bartosz Golaszewski

iio: addac: ad74115: use new GPIO line value setter callbacks

2025-04-22T18:10:02+00:00

struct gpio_chip now has callbacks for setting line values that return an integer, allowing to indicate failures. Convert the driver to using them. Signed-off-by: Bartosz Golaszewski Reviewed-by: Nuno Sá Link: https://patch.msgid.link/20250409-gpiochip-set-rv-iio-v2-7-4b36428f39cb@linaro.org Signed-off-by: Jonathan Cameron

iio: addac: ad74115: Switch to sparse friendly iio_device_claim/release_direct()

2025-04-22T18:09:58+00:00

These new functions allow sparse to find failures to release direct mode reducing chances of bugs over the claim_direct_mode() functions that are deprecated. Cc: Cosmin Tanislav Reviewed-by: David Lechner Reviewed-by: Marcelo Schmitt Link: https://patch.msgid.link/20250331121317.1694135-2-jic23@kernel.org Signed-off-by: Jonathan Cameron

Merge tag 'v6.12-rc2' into test2

2024-10-12T10:43:29+00:00

Linux 6.12-rc2 Resolved movement of asm/unaligned.h to linux/unaligned.h

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

iio: addac: ad74xxx: Constify struct iio_chan_spec

2024-09-30T08:20:59+00:00

'struct iio_chan_spec' are not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 35749 5879 384 42012 a41c drivers/iio/addac/ad74115.o 32242 3297 384 35923 8c53 drivers/iio/addac/ad74413r.o After: ===== text data bss dec hex filename 39109 2519 384 42012 a41c drivers/iio/addac/ad74115.o 33842 1697 384 35923 8c53 drivers/iio/addac/ad74413r.o Signed-off-by: Christophe JAILLET Link: https://patch.msgid.link/da291278e78b983ea2e657a25769f7d82ea2a6d0.1725717045.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron

iio: addac: ad74115: Use devm_regulator_get_enable_read_voltage()

2024-05-07T01:31:49+00:00

We can reduce boilerplate code by using devm_regulator_get_enable_read_voltage(). To maintain backwards compatibility in the case a DT does not provide an avdd-supply, we fall back to calling devm_regulator_get_enable() so that there is no change in user-facing behavior (e.g. dummy regulator will still be in sysfs). Also add an informative error message when we failed to get the voltage and knowing the voltage is required while we are touching this. Signed-off-by: David Lechner Acked-by: Jonathan Cameron Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-4-b1f11ab766c1@baylibre.com Signed-off-by: Mark Brown

iio: addac: ad74115: remove unused ad74115_dac_slew_rate_hz_tbl

2022-11-24T19:23:57+00:00

This table was supposed to be used for handling the DAC rate, but it ended up being unused. Remove it. Signed-off-by: Cosmin Tanislav Reported-by: kernel test robot Link: https://lore.kernel.org/r/20221124152559.7895-1-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron

iio: addac: add AD74115 driver

2022-11-23T20:49:00+00:00

The AD74115H is a single-channel, software-configurable, input and output device for industrial control applications. The AD74115H provides a wide range of use cases, integrated on a single chip. These use cases include analog output, analog input, digital output, digital input, resistance temperature detector (RTD), and thermocouple measurement capability. The AD74115H also has an integrated HART modem. A serial peripheral interface (SPI) is used to handle all communications to the device, including communications with the HART modem. The digital input and digital outputs can be accessed via the SPI or the general-purpose input and output (GPIO) pins to support higher speed data rates. The device features a 16-bit, sigma-delta analog-to-digital converter (ADC) and a 14-bit digital-to-analog converter (DAC). The AD74115H contains a high accuracy 2.5 V on-chip reference that can be used as the DAC and ADC reference. Signed-off-by: Cosmin Tanislav Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20221117080916.411766-3-cosmin.tanislav@analog.com Signed-off-by: Jonathan Cameron