kernel/git/stable/linux.git/drivers/iio/common, branch linux-5.11.y

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

2021-05-19T08:29:52+00:00

[ Upstream commit 7061803522ee7876df1ca18cdd1e1551f761352d ] During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann Cc: Srinivas Pandruvada Signed-off-by: Alexandru Ardelean Acked-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread

2021-01-14T20:56:57+00:00

Return a boolean value in st_sensors_new_samples_available routine in order to avoid an infinite loop in st_sensors_irq_thread if stat_drdy.addr is not defined or stat_drdy read fails Fixes: 90efe05562921 ("iio: st_sensors: harden interrupt handling") Reported-by: Jonathan Cameron Signed-off-by: Lorenzo Bianconi Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/c9ec69ed349e7200c779fd7a5bf04c1aaa2817aa.1607438132.git.lorenzo@kernel.org Cc: Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2020-11-24T07:30:08+00:00

Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.11 cycle Usual mixed bag of new drivers / device support + cleanups etc with the addition of a fairly big set of yaml conversions. Txt to yaml format conversions. In some cases dropped separate binding and moved to trivial devices (drop). Listed by manufacturer - dht11 temperature(drop) - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303 adi,adis16480 adi,adf4350 - ams,as3935 - asahi-kasei,ak8974 - atmel,sama5d2-adc - avago,apds9300 avago,apds9960 - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180 - brcm,iproc-static-adc - capella,cm36651 - domintech,dmard06(drop) - fsl,mag3110 fsl,mma8452 fsl,vf610-dac - hoperf,hp03 - honeywell,hmc5843 - kionix,kxcjk1013 - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102 maxim,max31856 maxim,max31855k maxim,max44009 maxim,max5481 maxim,max5821 - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop) - mediatek,mt2701-auxadc - melexis,mlx90614 melexis,mlx90632 - memsic,mmc35240(drop) - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725 - murata,zap2326 - nxp,fxas21002c nxp,lpc1850-dac - pni,rm3100 - qcom,pm8018-adc qcom,spmi-iadc - renesas,isl29501 renesas,rcar-gyroadc - samsung,sensorhub-rinato - sensiron,sgp30 - sentech,sx9500 - sharp,gp2ap020a00f - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180 - ti,adc084s021 ti,ads124s08 ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612 ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07 - upisemi,us51882 - vishay,vcnl4035 - x-powers,axp209 New device support * adi,ad5685 - Add support for AD5338R dual output 10-bit DAC - Add DT-binding doc. * mediatek,mt6360 - New driver for this SoC ADC with bindings and using new channel label support in the IIO core. * st,lsm6dsx - Add support for LSM6DST Core: * Add "label" to device channels, provided via a new core callback. Including DT docs for when that is the source, and ABI docs. * Add devm_iio_triggered_buffer_setup_ext to take extra attributes. * dmaengine, unwrap use of iio_buffer_set_attrs() * Drop iio_buffer_set_attrs() * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if no handler has run. * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect any known existing drivers, but will impact a future one. * kernel-doc fix in trigger.h * file-ops ordering cleanup Features * semtech,sx9310 - Add control of hardware gain, proximity thresholds, hysteresis and debounce. - Increase what information on hardware configuration can be provided via DT. Cleanup and minor features * adi,ad5685 - Add of_match_table * adi,ad7292 - Drop pointless spi_set_drvdata() call * adi,ad7298 - Drop platform data and tidy up external reference config. * adi,ad7303 - Drop platform data handling as unused. * adi,ad7768 - Add new label attribute for channels provided from dt. * adi,ad7887 - devm_ usage in probe simplifying remove and error handling. * adi,adis16201 - Drop pointless spi_set_drvdata() call * adi,adis16209 - Drop pointless spi_set_drvdata() call * adi,adis16240 - White space fixup * adi,adxl372 - use new devm_iio_triggered-buffer_setup_ext() * amlogic,meson-saradc - Drop pointless semicolon. * amstaos,tsl2563 - Put back i2c_device_id table as needed for greybus probing. * atmel,at91_adc - Use of_device_get_match_data() instead of open coding it. - Constify some driver data - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr() - Drop platform data as mostly dead code. - Tidy up reference voltage logic * atmel-sama5d2 - Drop a pointless semicolon - Merge buffer and trigger init into a separate function - Use new devm_iio_triggered_buff_setup_ext() * avago,apds9960 - Drop a pointless semicolon * bosch,bmc150 - Drop a pointless semicolon - Use new iio_triggered_buffer_setup_ext() * bosch,bmp280 - Drop a pointless semicolon * fsl,mma8452 - Constification * (google),cros_ec - Use new devm_iio_triggered_buffer_setup_ext() * hid-sensors - Use new iio_triggered_buffer_setup_ext() * ingenic,adc - Drop a pointless semicolon * invensense,icm426xx - Fix MAINTAINERS entry missing : * mediatek,mt6577_audxac - Add binding doc for mt8516 compatible with mt8173 * motorola,cpcap-adc - Fix an implicit fallthrough marking that clang needs to avoid warning. * samsung,exynos-adc - Stop relying on users counter form input device in ISR. * st,lsm6dsx - add vdd and vddio regulator control (including binding update) * st,stm32-adc - Tidy up code for dma transfers. - Adapt clock duty cycle for proper functioning. Note no known problems with existing boards. * st,vl53l0x-i2c - Put back i2c_device_id table as needed for greybus probing. * vishay,vcnl4035 - Put back i2c_device_id table as needed for greybus probing. * tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion. dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion. dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion. dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion dt-bindings:iio:light:st,vl6180: txt to yaml format conversion. dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion. dt-bindings:iio:light:ti,opt3001: txt to yaml conversion dt-bindings:iio:light:maxim,max44009: txt to yaml conversion. dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion. dt-bindings:iio:light:capella,cm36651: txt to yaml conversion. dt-bindings:iio:light:avago,apds9960: txt to yaml conversion dt-bindings:iio:light:avago,apds9300: txt to yaml conversion. dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion ...

iio: hid-sensors: use iio_triggered_buffer_setup_ext()

2020-11-21T14:53:33+00:00

This change switches to the new iio_triggered_buffer_setup_ext() function and removes the iio_buffer_set_attrs() call, for assigning the HW FIFO attributes to the buffer. Signed-off-by: Alexandru Ardelean Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200929125949.69934-9-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio: cros_ec: use devm_iio_triggered_buffer_setup_ext()

2020-11-21T14:53:28+00:00

This change switches to the new devm_iio_triggered_buffer_setup_ext() function and removes the iio_buffer_set_attrs() call, for assigning the HW FIFO attributes to the buffer. Signed-off-by: Alexandru Ardelean Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200929125949.69934-8-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio: cros_ec: Use default frequencies when EC returns invalid information

2020-11-01T15:22:45+00:00

Minimal and maximal frequencies supported by a sensor is queried. On some older machines, these frequencies are not returned properly and the EC returns 0 instead. When returned maximal frequency is 0, ignore the information and use default frequencies instead. Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs") Signed-off-by: Gwendal Grignou Reviewed-by: Enric Balletbo i Serra Link: https://lore.kernel.org/r/20200630153730.3302889-1-gwendal@chromium.org CC: Signed-off-by: Jonathan Cameron

Merge tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

2020-10-23T17:54:13+00:00

Pull chrome platform updates from Benson Leung: "cros-ec: - Error code cleanup across cros-ec by Guenter - Remove cros_ec_cmd_xfer in favor of cros_ec_cmd_xfer_status cros_ec_typec: - Landed initial USB4 support in typec connector class driver for cros_ec - Role switch bugfix on disconnect, and reordering configuration steps cros_ec_lightbar: - Fix buffer outsize and result for get_lightbar_version misc: - Remove config MFD_CROS_EC, now that transition from MFD is complete - Enable KEY_LEFTMETA in new location on arm based cros-ec-keyboard keymap" * tag 'tag-chrome-platform-for-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: ARM: dts: cros-ec-keyboard: Add alternate keymap for KEY_LEFTMETA platform/chrome: Use kobj_to_dev() instead of container_of() platform/chrome: cros_ec_proto: Drop cros_ec_cmd_xfer() platform/chrome: cros_ec_proto: Update cros_ec_cmd_xfer() call-sites platform/chrome: Kconfig: Remove the transitional MFD_CROS_EC config platform/chrome: cros_ec_lightbar: Reduce ligthbar get version command platform/chrome: cros_ec_trace: Add fields to command traces platform/chrome: cros_ec_typec: Re-order connector configuration steps platform/chrome: cros_ec_typec: Avoid setting usb role twice during disconnect platform/chrome: cros_ec_typec: Send enum values to usb_role_switch_set_role() platform/chrome: cros_ec_typec: USB4 support pwm: cros-ec: Simplify EC error handling platform/chrome: cros_ec_proto: Convert EC error codes to Linux error codes platform/input: cros_ec: Replace -ENOTSUPP with -ENOPROTOOPT pwm: cros-ec: Accept more error codes from cros_ec_cmd_xfer_status platform/chrome: cros_ec_sysfs: Report range of error codes from EC cros_ec_lightbar: Accept more error codes from cros_ec_cmd_xfer_status iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code

iio: cros_ec: unify hw fifo attributes into the core file

2020-09-29T16:27:07+00:00

The intent here is to minimize the use of iio_buffer_set_attrs(). Since we are planning to add support for multiple IIO buffers per IIO device, the issue has to do with: 1. Accessing 'indio_dev->buffer' directly (as is done with 'iio_buffer_set_attrs(indio_dev->buffer, )'). 2. The way that the buffer attributes would get handled or expanded when there are more buffers per IIO device. Current a sysfs kobj_type expands into a 'device' object that expands into an 'iio_dev' object. We will need to change this, so that the sysfs attributes for IIO buffers expand into IIO buffers at some point. Right now, the current IIO framework works fine for the '1 IIO device == 1 IIO buffer' case (that is now). Signed-off-by: Alexandru Ardelean Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20200923130339.997902-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron

iio: ssp: use PLATFORM_DEVID_NONE

2020-09-29T16:27:06+00:00

Use PLATFORM_DEVID_NONE define instead of "-1" value because: - it brings some meaning, - it might point attention why auto device ID was not used. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200921204939.20341-1-krzk@kernel.org Signed-off-by: Jonathan Cameron

iio: cros_ec: Accept -EOPNOTSUPP as 'not supported' error code

2020-08-24T09:37:34+00:00

A follow-up patch will extend the number of errors reported by cros_ec_cmd_xfer_status(). Specifically, the function will return -EOPNOTSUPP if a command is not supported by the EC. Prepare for it. Cc: Gwendal Grignou Cc: Yu-Hsuan Hsu Cc: Prashant Malani Cc: Brian Norris Acked-by: Jonathan Cameron Reviewed-by: Brian Norris Signed-off-by: Guenter Roeck Signed-off-by: Enric Balletbo i Serra