kernel/git/stable/linux.git/drivers/iio/humidity, branch linux-5.9.y

Merge 5.8-rc6 into staging-next

2020-07-20T07:37:31+00:00

We need the staging fixes in here, and it resolves a merge issue with an iio driver. Signed-off-by: Greg Kroah-Hartman

Replace HTTP links with HTTPS ones: drivers/iio

2020-07-13T14:05:59+00:00

Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov Signed-off-by: Jonathan Cameron

iio:humidity:hts221 Fix alignment and data leak issues

2020-07-05T13:22:48+00:00

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. Explicit alignment of ts needed to ensure consistent padding on all architectures (particularly x86_32 with it's 4 byte alignment of s64) Fixes: e4a70e3e7d84 ("iio: humidity: add support to hts221 rh/temp combo device") Reported-by: Lars-Peter Clausen Acked-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron Cc:

iio:humidity:hdc100x Fix alignment and data leak issues

2020-07-05T13:22:48+00:00

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() data. This data is allocated with kzalloc so no data can leak apart from previous readings. Fixes: 16bf793f86b2 ("iio: humidity: hdc100x: add triggered buffer support for HDC100X") Reported-by: Lars-Peter Clausen Acked-by: Matt Ranostay Cc: Alison Schofield Signed-off-by: Jonathan Cameron Cc:

iio: Move attach/detach of the poll func to the core

2020-06-20T16:34:44+00:00

All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen Signed-off-by: Alexandru Ardelean Tested-by: Eugen Hristev #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron

iio: remove left-over parent assignments

2020-06-14T10:50:04+00:00

These were found by doing some shell magic: ------------ for file in $(git grep -w devm_iio_device_alloc | cut -d: -f1 | sort | uniq) ; do if grep 'parent =' $file | grep -v trig | grep -vq devm_; then echo "$file -> $(grep "parent =" $file)" fi done ----------- The output is bearable [after the semantic patch is applied]. There is a mix of trigger assignments with some iio device parent assignments that are removed via this patch. JC: A few more added via inspection of all parent = statements in drivers/iio. Some of these may just have crossed with this series, others were less obvious to scripting due to some cross file / module boundary calls. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: remove explicit IIO device parent assignment

2020-06-14T10:49:59+00:00

This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: humidity: hts221: remove usage of iio_priv_to_dev()

2020-06-14T10:49:13+00:00

We may want to get rid of the iio_priv_to_dev() helper. That's a bit uncertain at this point. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. For this driver, removing the iio_priv_to_dev() helper means passing the iio_dev object on hts221_allocate_buffers() & hts221_allocate_trigger(). Signed-off-by: Alexandru Ardelean Signed-off-by: Jonathan Cameron

iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger

2020-05-10T08:35:53+00:00

The main intent here is to get rid of the iio_buffer_set_attrs() helper, or at least rework it's usage a bit. The problem with that helper is that it needs a pointer to the buffer, which makes supporting multiple buffers per IIO device a bit more cumbersome. The hid_sensor_setup_trigger() is pretty much used in the same way: - iio_triggered_buffer_setup() gets called before - then hid_sensor_setup_trigger() and hid_sensor_setup_batch_mode() gets called which may attach some fifo attributes This change merges the 2 together under the hid_sensor_setup_trigger() function. Only the &iio_pollfunc_store_time is passed to all devices, so it's not even required to pass it explicitly outside of the common hid_sensor_setup_trigger() function. Moving the devm_iio_triggered_buffer_setup/cleanup() calls into the common place code can help the rework of the buffer code, since it is in one place. One detail of the change is that there are 2 drivers that use devm_iio_triggered_buffer_setup(). That function gets implicitly replaced with iio_triggered_buffer_setup()/cleanup(), but since all drivers call both hid_sensor_setup_trigger9) & hid_sensor_remove_trigger() trigger, the iio_triggered_buffer_cleanup() piggy backs on the hid_sensor_remove_trigger() call, which should cover the cleanup. Signed-off-by: Alexandru Ardelean Acked-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron

iio: humidity: hts221: Drop unneeded casting when print error code

2020-03-21T10:27:15+00:00

Explicit casting in printf() usually shows that something is not okay. Here, we really don't need it by providing correct specifier. Signed-off-by: Andy Shevchenko Signed-off-by: Jonathan Cameron