kernel/git/stable/linux.git/drivers/iio/light, branch linux-5.11.y

iio: tsl2583: Fix division by a zero lux_val

2021-05-19T08:29:55+00:00

commit af0e1871d79cfbb91f732d2c6fa7558e45c31038 upstream. The lux_val returned from tsl2583_get_lux can potentially be zero, so check for this to avoid a division by zero and an overflowed gain_trim_val. Fixes clang scan-build warning: drivers/iio/light/tsl2583.c:345:40: warning: Either the condition 'lux_val<0' is redundant or there is division by zero at line 345. [zerodivcond] Fixes: ac4f6eee8fe8 ("staging: iio: TAOS tsl258x: Device driver") Signed-off-by: Colin Ian King Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER

2021-05-19T08:29:52+00:00

[ Upstream commit 7061803522ee7876df1ca18cdd1e1551f761352d ] During commit 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger"), the iio_triggered_buffer_{setup,cleanup}() functions got moved under the hid-sensor-trigger module. The above change works fine, if any of the sensors get built. However, when only the common hid-sensor-trigger module gets built (and none of the drivers), then the IIO_TRIGGERED_BUFFER symbol isn't selected/enforced. Previously, each driver would enforce/select the IIO_TRIGGERED_BUFFER symbol. With this change the HID_SENSOR_IIO_TRIGGER (for the hid-sensor-trigger module) will enforce that IIO_TRIGGERED_BUFFER gets selected. All HID sensor drivers select the HID_SENSOR_IIO_TRIGGER symbol. So, this change removes the IIO_TRIGGERED_BUFFER enforcement from each driver. Fixes: 067fda1c065ff ("iio: hid-sensors: move triggered buffer setup into hid_sensor_setup_trigger") Reported-by: Thomas Deutschmann Cc: Srinivas Pandruvada Signed-off-by: Alexandru Ardelean Acked-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210414084955.260117-1-aardelean@deviqon.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: light: gp2ap002: Fix rumtime PM imbalance on error

2021-05-19T08:29:51+00:00

[ Upstream commit 8edb79af88efc6e49e735f9baf61d9f0748b881f ] When devm_request_threaded_irq() fails, we should decrease the runtime PM counter to keep the counter balanced. But when iio_device_register() fails, we need not to decrease it because we have already decreased it before. Signed-off-by: Dinghao Liu Reviewed-by: Linus Walleij Fixes: 97d642e23037 ("iio: light: Add a driver for Sharp GP2AP002x00F") Link: https://lore.kernel.org/r/20210407034927.16882-1-dinghao.liu@zju.edu.cn Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: hid-sensor-prox: Fix scale not correct issue

2021-03-24T10:54:14+00:00

commit d68c592e02f6f49a88e705f13dfc1883432cf300 upstream. Currently, the proxy sensor scale is zero because it just return the exponent directly. To fix this issue, this patch use hid_sensor_format_scale to process the scale first then return the output. Fixes: 39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver") Signed-off-by: Ye Xiang Link: https://lore.kernel.org/r/20210130102530.31064-1-xiang.ye@intel.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio:light:st_uvis25: Fix timestamp alignment and prevent data leak.

2020-12-03T19:40:27+00:00

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv() This data is allocated with kzalloc() so no data can leak apart from previous readings. A local unsigned int variable is used for the regmap call so it is clear there is no potential issue with writing into the padding of the structure. Fixes: 3025c8688c1e ("iio: light: add support for UVIS25 sensor") Reported-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Acked-by: Lorenzo Bianconi Cc: Link: https://lore.kernel.org/r/20200920112742.170751-3-jic23@kernel.org

iio:light:rpr0521: Fix timestamp alignment and prevent data leak.

2020-12-03T19:40:26+00:00

One of a class of bugs pointed out by Lars in a recent review. iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned to the size of the timestamp (8 bytes). This is not guaranteed in this driver which uses an array of smaller elements on the stack. As Lars also noted this anti pattern can involve a leak of data to userspace and that indeed can happen here. We close both issues by moving to a suitable structure in the iio_priv(). This data is allocated with kzalloc() so no data can leak apart from previous readings and in this case the status byte from the device. The forced alignment of ts is not necessary in this case but it potentially makes the code less fragile. >From personal communications with Mikko: We could probably split the reading of the int register, but it would mean a significant performance cost of 20 i2c clock cycles. Fixes: e12ffd241c00 ("iio: light: rpr0521 triggered buffer") Signed-off-by: Jonathan Cameron Reviewed-by: Alexandru Ardelean Cc: Mikko Koivunen Cc: Link: https://lore.kernel.org/r/20200920112742.170751-2-jic23@kernel.org

Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

2020-11-24T07:30:08+00:00

Jonathan writes: First set of new device support, features and cleanups for IIO in the 5.11 cycle Usual mixed bag of new drivers / device support + cleanups etc with the addition of a fairly big set of yaml conversions. Txt to yaml format conversions. In some cases dropped separate binding and moved to trivial devices (drop). Listed by manufacturer - dht11 temperature(drop) - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303 adi,adis16480 adi,adf4350 - ams,as3935 - asahi-kasei,ak8974 - atmel,sama5d2-adc - avago,apds9300 avago,apds9960 - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180 - brcm,iproc-static-adc - capella,cm36651 - domintech,dmard06(drop) - fsl,mag3110 fsl,mma8452 fsl,vf610-dac - hoperf,hp03 - honeywell,hmc5843 - kionix,kxcjk1013 - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102 maxim,max31856 maxim,max31855k maxim,max44009 maxim,max5481 maxim,max5821 - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop) - mediatek,mt2701-auxadc - melexis,mlx90614 melexis,mlx90632 - memsic,mmc35240(drop) - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725 - murata,zap2326 - nxp,fxas21002c nxp,lpc1850-dac - pni,rm3100 - qcom,pm8018-adc qcom,spmi-iadc - renesas,isl29501 renesas,rcar-gyroadc - samsung,sensorhub-rinato - sensiron,sgp30 - sentech,sx9500 - sharp,gp2ap020a00f - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180 - ti,adc084s021 ti,ads124s08 ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612 ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07 - upisemi,us51882 - vishay,vcnl4035 - x-powers,axp209 New device support * adi,ad5685 - Add support for AD5338R dual output 10-bit DAC - Add DT-binding doc. * mediatek,mt6360 - New driver for this SoC ADC with bindings and using new channel label support in the IIO core. * st,lsm6dsx - Add support for LSM6DST Core: * Add "label" to device channels, provided via a new core callback. Including DT docs for when that is the source, and ABI docs. * Add devm_iio_triggered_buffer_setup_ext to take extra attributes. * dmaengine, unwrap use of iio_buffer_set_attrs() * Drop iio_buffer_set_attrs() * Centralize ioctl call handling. Later fix to ensure -EINVAL returned if no handler has run. * Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect any known existing drivers, but will impact a future one. * kernel-doc fix in trigger.h * file-ops ordering cleanup Features * semtech,sx9310 - Add control of hardware gain, proximity thresholds, hysteresis and debounce. - Increase what information on hardware configuration can be provided via DT. Cleanup and minor features * adi,ad5685 - Add of_match_table * adi,ad7292 - Drop pointless spi_set_drvdata() call * adi,ad7298 - Drop platform data and tidy up external reference config. * adi,ad7303 - Drop platform data handling as unused. * adi,ad7768 - Add new label attribute for channels provided from dt. * adi,ad7887 - devm_ usage in probe simplifying remove and error handling. * adi,adis16201 - Drop pointless spi_set_drvdata() call * adi,adis16209 - Drop pointless spi_set_drvdata() call * adi,adis16240 - White space fixup * adi,adxl372 - use new devm_iio_triggered-buffer_setup_ext() * amlogic,meson-saradc - Drop pointless semicolon. * amstaos,tsl2563 - Put back i2c_device_id table as needed for greybus probing. * atmel,at91_adc - Use of_device_get_match_data() instead of open coding it. - Constify some driver data - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr() - Drop platform data as mostly dead code. - Tidy up reference voltage logic * atmel-sama5d2 - Drop a pointless semicolon - Merge buffer and trigger init into a separate function - Use new devm_iio_triggered_buff_setup_ext() * avago,apds9960 - Drop a pointless semicolon * bosch,bmc150 - Drop a pointless semicolon - Use new iio_triggered_buffer_setup_ext() * bosch,bmp280 - Drop a pointless semicolon * fsl,mma8452 - Constification * (google),cros_ec - Use new devm_iio_triggered_buffer_setup_ext() * hid-sensors - Use new iio_triggered_buffer_setup_ext() * ingenic,adc - Drop a pointless semicolon * invensense,icm426xx - Fix MAINTAINERS entry missing : * mediatek,mt6577_audxac - Add binding doc for mt8516 compatible with mt8173 * motorola,cpcap-adc - Fix an implicit fallthrough marking that clang needs to avoid warning. * samsung,exynos-adc - Stop relying on users counter form input device in ISR. * st,lsm6dsx - add vdd and vddio regulator control (including binding update) * st,stm32-adc - Tidy up code for dma transfers. - Adapt clock duty cycle for proper functioning. Note no known problems with existing boards. * st,vl53l0x-i2c - Put back i2c_device_id table as needed for greybus probing. * vishay,vcnl4035 - Put back i2c_device_id table as needed for greybus probing. * tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits) dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion. dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion. dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion. dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion dt-bindings:iio:light:st,vl6180: txt to yaml format conversion. dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion. dt-bindings:iio:light:ti,opt3001: txt to yaml conversion dt-bindings:iio:light:maxim,max44009: txt to yaml conversion. dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion. dt-bindings:iio:light:capella,cm36651: txt to yaml conversion. dt-bindings:iio:light:avago,apds9960: txt to yaml conversion dt-bindings:iio:light:avago,apds9300: txt to yaml conversion. dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion ...

iio: light: fix kconfig dependency bug for VCNL4035

2020-11-08T15:43:44+00:00

When VCNL4035 is enabled and IIO_BUFFER is disabled, it results in the following Kbuild warning: WARNING: unmet direct dependencies detected for IIO_TRIGGERED_BUFFER Depends on [n]: IIO [=y] && IIO_BUFFER [=n] Selected by [y]: - VCNL4035 [=y] && IIO [=y] && I2C [=y] The reason is that VCNL4035 selects IIO_TRIGGERED_BUFFER without depending on or selecting IIO_BUFFER while IIO_TRIGGERED_BUFFER depends on IIO_BUFFER. This can also fail building the kernel. Honor the kconfig dependency to remove unmet direct dependency warnings and avoid any potential build failures. Fixes: 55707294c4eb ("iio: light: Add support for vishay vcnl4035") Signed-off-by: Necip Fazil Yildiran Link: https://bugzilla.kernel.org/show_bug.cgi?id=209883 Link: https://lore.kernel.org/r/20201102223523.572461-1-fazilyildiran@gmail.com Cc: Signed-off-by: Jonathan Cameron

iio:light:tsl2563 use generic fw accessors

2020-11-01T15:28:55+00:00

Replace of_property_read_u32() with device_property_read_u32(), when reading the amstaos,cover-comp-gain.This opens up the possibility of passing the properties during platform instantiation of the device by a suitable populated struct property_entry. Additionally, a minor change in logic is added to remove the of_node present check. Signed-off-by: Vaishnav M A Link: https://lore.kernel.org/r/20201018203552.GA816421@ubuntu Signed-off-by: Jonathan Cameron

iio: light: vcnl4035 add i2c_device_id

2020-11-01T15:28:32+00:00

Add i2c_device_id table for the vcnl4035 driver, enabling device instantiation using i2c_new_client_device() or from userspace in cases where device-tree based description is not possible now, like device(s) on a gbphy i2c adapter created by greybus. Signed-off-by: Vaishnav M A Link: https://lore.kernel.org/r/20201018195357.GA814864@ubuntu Signed-off-by: Jonathan Cameron