kernel/git/stable/linux.git/drivers/iio/light, branch linux-6.15.y

iio: hid-sensor-prox: Add support for 16-bit report size

2025-07-06T09:04:07+00:00

[ Upstream commit ad02ca57e44e9936fca5095840fad9d4b47c5559 ] On Intel platforms, the HID_USAGE_SENSOR_HUMAN_PROXIMITY report size is 16 bits. This patch adds support for handling 16-bit report sizes for the HID_USAGE_SENSOR_HUMAN_PROXIMITY usage in the HID sensor proximity driver. Previously, the driver only supported 8-bit and 32-bit report sizes. With this change, the driver can now correctly process 16-bit proximity data, ensuring accurate human presence detection on platforms where this report size is used. Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/20250317013634.4117399-1-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: light: al3000a: Fix an error handling path in al3000a_probe()

2025-07-06T09:04:07+00:00

[ Upstream commit c0461f8e842495041c18b2c67647501d55c17441 ] If regmap_write() fails in al3000a_init(), al3000a_set_pwr_off is not called. In order to avoid such a situation, move the devm_add_action_or_reset() which calls al3000a_set_pwr_off right after a successful al3000a_set_pwr_on. Signed-off-by: David Heidelberg Link: https://patch.msgid.link/20250402-al3010-iio-regmap-v4-2-d189bea87261@ixit.cz Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: hid-sensor-prox: Fix incorrect OFFSET calculation

2025-04-07T18:32:50+00:00

The OFFSET calculation in the prox_read_raw() was incorrectly using the unit exponent, which is intended for SCALE calculations. Remove the incorrect OFFSET calculation and set it to a fixed value of 0. Cc: stable@vger.kernel.org Fixes: 39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver") Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/20250331055022.1149736-4-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron

iio: hid-sensor-prox: support multi-channel SCALE calculation

2025-04-07T18:32:49+00:00

With the introduction of multi-channel support in commit 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels"), each channel requires an independent SCALE calculation, but the existing code only calculates SCALE for a single channel. Addresses the problem by modifying the driver to perform independent SCALE calculations for each channel. Cc: stable@vger.kernel.org Fixes: 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels") Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/20250331055022.1149736-3-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron

iio: hid-sensor-prox: Restore lost scale assignments

2025-04-07T18:32:49+00:00

The variables `scale_pre_decml`, `scale_post_decml`, and `scale_precision` were assigned in commit d68c592e02f6 ("iio: hid-sensor-prox: Fix scale not correct issue"), but due to a merge conflict in commit 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next"), these assignments were lost. Add back lost assignments and replace `st->prox_attr` with `st->prox_attr[0]` because commit 596ef5cf654b ("iio: hid-sensor-prox: Add support for more channels") changed `prox_attr` to an array. Cc: stable@vger.kernel.org # 5.13+ Fixes: 9c15db92a8e5 ("Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next") Signed-off-by: Zhang Lixu Acked-by: Srinivas Pandruvada Link: https://patch.msgid.link/20250331055022.1149736-2-lixu.zhang@intel.com Signed-off-by: Jonathan Cameron

iio: light: opt3001: fix deadlock due to concurrent flag access

2025-04-07T18:32:49+00:00

The threaded IRQ function in this driver is reading the flag twice: once to lock a mutex and once to unlock it. Even though the code setting the flag is designed to prevent it, there are subtle cases where the flag could be true at the mutex_lock stage and false at the mutex_unlock stage. This results in the mutex not being unlocked, resulting in a deadlock. Fix it by making the opt3001_irq() code generally more robust, reading the flag into a variable and using the variable value at both stages. Fixes: 94a9b7b1809f ("iio: light: add support for TI's opt3001 light sensor") Cc: stable@vger.kernel.org Signed-off-by: Luca Ceresoli Link: https://patch.msgid.link/20250321-opt3001-irq-fix-v1-1-6c520d851562@bootlin.com Signed-off-by: Jonathan Cameron

Merge tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

2025-03-14T06:15:12+00:00

Jonathan writes: IIO: New device support, features and cleanup for the 6.15 cycle. The usual mixture of new drivers, support in existing drivers for new devices, a range of features and general subsystem cleanup. Two merges of immutable branches in here: * SPI offload support. Culmination of a long effort to bring the ability to offload triggered sequences of SPI operations to specific hardware, allow high datarate acquisition over an SPI bus (if you have the right hardware / FPGA firmware) * GPIO set-array-helper - enables code simplification. New device support ================== adi,ad3552r-hs: - Add support for AD3541r and AD3542r via newly supported FPGA HDL. adi,ad4030 - New driver supporting the AD4030, AD4630 AD4630-16, AD4640-24, AD4632-16, AD4632-24 1 and 2 channel high precision SPI ADCs. adi,ad4851 - New driver and backend support for the AD4851, AD4852, AD4853, AD4854, AD4855, AD4846, AD4857, AD4858 and AD4858I high speed multichannel simultaneous sampling ADCs. adi,ad7191 - New driver for this 24-bit ADC for precision bridge applications, adi,ad7380 - Add support for the adaq4381-4 which is a 14-bit version of the already supported adaq4380-1 adi,adis16550 - New driver using the ADIS library (which needed extensions) for this IMU. brcm,apds9160 - New driver for this proximity and ambient light sensor. dynaimage,al3000a - New driver for this illuminance sensor. mcube,mc3230 - Add support for the mc3510c accelerometer with a different scale to existing supported parts (some rework preceded this) nxp,imx93 - Add compatibles for imx94 and imx95 which are fully compatible with imx93. rockchip,saradc - Add support for the RK3528 ADC - Add support for the RK3562 ADC silab,si7210 - New driver to support this I2C Hall effect magnetic position sensor. ti,ads7138 - New driver supporting the ADS7128 and AD7138 I2C ADCs. Staging driver drop =================== adi,adis16240 - Drop this impact sensor. Interesting part but complex hence never left staging due to ABI challenges. No longer readily available so drop driver. New features ============ Documentation - A really nice overview document introduce ADC terminology and how it maps to IIO. core - New description for FAULT events, used in the ad7173. - filter_type ABI used in ad4130. buffer-dmaengine - Split DMA channel request from buffer allocation (for SPI offload) - Add a new _with_handle setup variant. (for SPI offload) adi,adf4371 - Add control of reference clock type and support for frequency doubling where appropriate. adi,ad4695 - Support SPI offload. - Support oversampling control. adi,ad5791 - Support SPI offload. adi,ad7124 - Add channel calibration support. adi,ad7380: - Alert support (threshold interrupts) - SPI offload support. adi,ad7606 - Support writing registers when using backend enabling software control of modes. adi,ad7944 - Support SPI offload. adi,ad9832 - Use devm_regulator_get_enable() to simplify code. adi,ad9834 - Use devm_regulator_get_enable() to simplify code. adi,adxl345 - Improve IRQ handling code. - Add debug access to registers. bosch,bmi270 - Add temperature channel support. - Add data ready trigger. google,cross_ec - Add trace events. mcube,mc3230 - Add mount matrix support - Add an OF match table. Cleanup and minor bug fixes =========================== Tree wide: - Stop using iio_device_claim_direct_scoped() and introduce sparse friendly iio_device_claim/release_direct() The conditional scoped cleanup has proved hard to deal with, requiring workarounds for various compiler issues and in is rather non-intuitive so abandon that experiment. One of the attractions of that approach was that it made it much harder to have unbalanced claim/release bugs so instead introduce a conditional-lock style boolean returning new pair of functions. These are inline in the header and have __acquire and __release calls allowing sparse to detect lack of balance. There are occasional false positives but so far those have reflected complex code paths that benefited from cleanup anyway. The first set of driver conversions are in this pull request, more to follow next cycle. Various related cleanup in drivers. Removal of the _scoped code is completed and the definition removed. - Use of str_enable_disable() and similar helpers. - Don't set regmap cache to REGCACHE_NONE as that's the default anyway. - Change some caches from RBTREE to MAPLE reflecting best practice. - Use the new gpiod_multi_set_value_cansleep() - Make sure to grab direct mode for some calibrations paths. - Avoid using memcmp on structures when checking for matching channel configs. Instead just match field by field. dt-bindings: - Fix up indentation inconsistencies. gts-helper: - Simplify building of available scale table. adi,ad-sigma-delta - Make sure to disable channel after calibration done. - Add error handling in configuring channel during calibration. adi,ad2s1201 - use a bitmap_write() rather than directly accessing underlying storage. adi,ad3552r-hs - Fix a wrong error message. - Make sure to use instruction mode for configuration. adi,ad4695 - Add a conversion to ensure exit from conversion mode. - Use custom regmap to handle required sclk rate change. - Fix an out of bounds array access - Simplify oversampling ratio handling. adi,ad4851 - Fix a sign bug. adi,ad5791 - Fix wrong exported number of storage bits. adi,ad7124 - Disable all channels at probe to avoid strange initial configurations. adi,ad7173 - Rework to allow static const struct ad_sigma_delta without need to make a copy. adi,ad7623 - Drop a BSD license tag that the authors consider unnecessary. adi,ad7768-1 - Fix channels sign description exposed to user space. - Set MOSI idle state to avoid accidental device reset. - Avoid some overkill locking. adi,axi-dac - Check if device interface is busy when enabling data stream. - Add control of bus mode. bosch,bmi270 - Move a struct definition to a c file as only used there. vishay,veml6030 - Enable regmap cache to reduce bus traffic. - Fix ABI bug around scale reporting. vishay,vem6075 - Check array bounds to harden against broken hardware. Various other minor tweaks and fixes not called out. * * tag 'iio-for-6.15a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (223 commits) doc: iio: ad7380: describe offload support iio: ad7380: add support for SPI offload iio: light: Add check for array bounds in veml6075_read_int_time_ms iio: adc: ti-ads7924 Drop unnecessary function parameters staging: iio: ad9834: Use devm_regulator_get_enable() staging: iio: ad9832: Use devm_regulator_get_enable() iio: gyro: bmg160_spi: add of_match_table dt-bindings: iio: adc: Add i.MX94 and i.MX95 support iio: adc: ad7768-1: remove unnecessary locking Documentation: ABI: add wideband filter type to sysfs-bus-iio iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset iio: adc: ad7768-1: Fix conversion result sign iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config() iio: adc: ad7124: Implement system calibration iio: adc: ad7124: Implement internal calibration at probe time iio: adc: ad_sigma_delta: Add error checking for ad_sigma_delta_set_channel() iio: adc: ad4130: Adapt internal names to match official filter_type ABI iio: adc: ad7173: Fix comparison of channel configs iio: adc: ad7124: Fix comparison of channel configs iio: adc: ad4130: Fix comparison of channel setups ...

iio: light: Add check for array bounds in veml6075_read_int_time_ms

2025-03-11T19:09:17+00:00

The array contains only 5 elements, but the index calculated by veml6075_read_int_time_index can range from 0 to 7, which could lead to out-of-bounds access. The check prevents this issue. Coverity Issue CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN) overrun-local: Overrunning array veml6075_it_ms of 5 4-byte elements at element index 7 (byte offset 31) using index int_index (which evaluates to 7) This is hardening against potentially broken hardware. Good to have but not necessary to backport. Fixes: 3b82f43238ae ("iio: light: add VEML6075 UVA and UVB light sensor driver") Signed-off-by: Karan Sanghavi Reviewed-by: Javier Carrasco Link: https://patch.msgid.link/Z7dnrEpKQdRZ2qFU@Emma Signed-off-by: Jonathan Cameron

iio: light: Fix spelling mistake "regist" -> "register"

2025-03-04T14:50:52+00:00

There are spelling mistakes in dev_err messages. Fix them. Signed-off-by: Colin Ian King Link: https://patch.msgid.link/20250228090228.679535-1-colin.i.king@gmail.com Signed-off-by: Jonathan Cameron

iio: light: Add support for AL3000a illuminance sensor

2025-03-04T13:17:48+00:00

AL3000a is a simple I2C-based ambient light sensor, which is closely related to AL3010 and AL3320a, but has significantly different way of processing data generated by the sensor. Tested-by: Robert Eckelmann Tested-by: Antoni Aloy Torrens Signed-off-by: Svyatoslav Ryhel Reviewed-by: David Heidelberg Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20250217140336.107476-3-clamor95@gmail.com Signed-off-by: Jonathan Cameron