kernel/git/stable/linux.git/drivers/iio, branch linux-5.16.y

iio: adc: Add check for devm_request_threaded_irq

2022-04-08T12:06:23+00:00

[ Upstream commit b30537a4cedcacf0ade2f33ebb7610178ed1e7d7 ] As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value and return error if fails. Fixes: fa659a40b80b ("iio: adc: twl6030-gpadc: Use devm_* API family") Signed-off-by: Jiasheng Jiang Link: https://lore.kernel.org/r/20220224062849.3280966-1-jiasheng@iscas.ac.cn Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: mma8452: Fix probe failing when an i2c_device_id is used

2022-04-08T12:06:22+00:00

[ Upstream commit a47ac019e7e8129b93a0b991e04b2a59872e053d ] The mma8452_driver declares both of_match_table and i2c_driver.id_table match-tables, but its probe() function only checked for of matches. Add support for i2c_device_id matches. This fixes the driver not loading on some x86 tablets (e.g. the Nextbook Ares 8) where the i2c_client is instantiated by platform code using an i2c_device_id. Drop of_match_ptr() protection to avoid unused warning. Fixes: c3cdd6e48e35 ("iio: mma8452: refactor for seperating chip specific data") Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20220208124336.511884-1-hdegoede@redhat.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: inkern: make a best effort on offset calculation

2022-04-08T12:05:21+00:00

commit ca85123354e1a65a22170286387b4791997fe864 upstream. iio_convert_raw_to_processed_unlocked() assumes the offset is an integer. Make a best effort to get a valid offset value for fractional cases without breaking implicit truncations. Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Liam Beguin Reviewed-by: Peter Rosin Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220108205319.2046348-4-liambeguin@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: inkern: apply consumer scale when no channel scale is available

2022-04-08T12:05:21+00:00

commit 14b457fdde38de594a4bc4bd9075019319d978da upstream. When a consumer calls iio_read_channel_processed() and no channel scale is available, it's assumed that the scale is one and the raw value is returned as expected. On the other hand, if the consumer calls iio_convert_raw_to_processed() the scaling factor requested by the consumer is not applied. This for example causes the consumer to process mV when expecting uV. Make sure to always apply the scaling factor requested by the consumer. Fixes: adc8ec5ff183 ("iio: inkern: pass through raw values if no scaling") Signed-off-by: Liam Beguin Reviewed-by: Peter Rosin Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220108205319.2046348-3-liambeguin@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: inkern: apply consumer scale on IIO_VAL_INT cases

2022-04-08T12:05:21+00:00

commit 1bca97ff95c732a516ebb68da72814194980e0a5 upstream. When a consumer calls iio_read_channel_processed() and the channel has an integer scale, the scale channel scale is applied and the processed value is returned as expected. On the other hand, if the consumer calls iio_convert_raw_to_processed() the scaling factor requested by the consumer is not applied. This for example causes the consumer to process mV when expecting uV. Make sure to always apply the scaling factor requested by the consumer. Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Liam Beguin Reviewed-by: Peter Rosin Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220108205319.2046348-2-liambeguin@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: afe: rescale: use s64 for temporary scale calculations

2022-04-08T12:05:21+00:00

commit 51593106b608ae4247cc8da928813347da16d025 upstream. All four scaling coefficients can take signed values. Make tmp a signed 64-bit integer and switch to div_s64() to preserve signs during 64-bit divisions. Fixes: 8b74816b5a9a ("iio: afe: rescale: new driver") Signed-off-by: Liam Beguin Reviewed-by: Peter Rosin Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220108205319.2046348-5-liambeguin@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: aspeed: Add divider flag to fix incorrect voltage reading.

2022-04-08T12:05:21+00:00

commit 571426631acf46e2999c7ecd1e9d048172969a43 upstream. The formula for the ADC sampling period in ast2400/ast2500 is: ADC clock period = PCLK * 2 * (ADC0C[31:17] + 1) * (ADC0C[9:0]) When ADC0C[9:0] is set to 0 the sampling voltage will be lower than expected, because the hardware may not have enough time to charge/discharge to a stable voltage. This patch use the flag CLK_DIVIDER_ONE_BASED which will use the raw value read from the register, with the value of zero considered invalid to conform to the corrected formula. Fixes: 573803234e72 ("iio: Aspeed ADC") Reported-by: Konstantin Klubnichkin Signed-off-by: Billy Tsai Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20220221012705.22008-1-billy_tsai@aspeedtech.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: Fix error handling for PM

2022-03-02T10:51:13+00:00

commit 632fe0bb8c5b9c06ec961f575ee42a6fff5eceeb upstream. The pm_runtime_enable will increase power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). In the PM Runtime docs: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. We should do this in error handling. Fix this problem for the following drivers: bmc150, bmg160, kmx61, kxcj-1013, mma9551, mma9553. Fixes: 7d0ead5c3f00 ("iio: Reconcile operation order between iio_register/unregister and pm functions") Signed-off-by: Miaoqian Lin Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220106112309.16879-1-linmq006@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: imu: st_lsm6dsx: wait for settling time in st_lsm6dsx_read_oneshot

2022-03-02T10:51:13+00:00

commit ea85bf906466191b58532bb19f4fbb4591f0a77e upstream. We need to wait for sensor settling time (~ 3/ODR) before reading data in st_lsm6dsx_read_oneshot routine in order to avoid corrupted samples. Fixes: 290a6ce11d93 ("iio: imu: add support to lsm6dsx driver") Reported-by: Mario Tesi Tested-by: Mario Tesi Signed-off-by: Lorenzo Bianconi Link: https://lore.kernel.org/r/b41ebda5535895298716c76d939f9f165fcd2d13.1644098120.git.lorenzo@kernel.org Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: accel: fxls8962af: add padding to regmap for SPI

2022-03-02T10:51:12+00:00

commit ccbed9d8d2a5351d8238f2d3f0741c9a3176f752 upstream. Add missing don't care padding between address and data for SPI transfers Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers") Signed-off-by: Sean Nyekjaer Link: https://lore.kernel.org/r/20211220125144.3630539-1-sean@geanix.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman