kernel/git/stable/linux.git/drivers/iio, branch linux-6.15.y

iio: adc: ad7768-1: Ensure SYNC_IN pulse minimum timing requirement

2025-08-20T16:36:00+00:00

[ Upstream commit 7e54d932873d91a55d1b89b7389876d78aeeab32 ] The SYNC_IN pulse width must be at least 1.5 x Tmclk, corresponding to ~2.5 µs at the lowest supported MCLK frequency. Add a 3 µs delay to ensure reliable synchronization timing even for the worst-case scenario. Signed-off-by: Jonathan Santos Reviewed-by: David Lechner Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/d3ee92a533cd1207cf5c5cc4d7bdbb5c6c267f68.1749063024.git.Jonathan.Santos@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: ad_sigma_delta: don't overallocate scan buffer

2025-08-20T16:35:55+00:00

[ Upstream commit 5a2f15c5a8e017d0951e6dc62aa7b5b634f56881 ] Fix overallocating the size of the scan buffer by converting bits to bytes. The size is meant to be in bytes, so scanbits needs to be divided by 8. Signed-off-by: David Lechner Reviewed-by: Andy Shevchenko Reviewed-by: Nuno Sá Link: https://patch.msgid.link/20250701-iio-adc-ad7173-add-spi-offload-support-v3-1-42abb83e3dac@baylibre.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: ad7949: use spi_is_bpw_supported()

2025-08-01T08:51:23+00:00

[ Upstream commit 7b86482632788acd48d7b9ee1867f5ad3a32ccbb ] Use spi_is_bpw_supported() instead of directly accessing spi->controller ->bits_per_word_mask. bits_per_word_mask may be 0, which implies that 8-bits-per-word is supported. spi_is_bpw_supported() takes this into account while spi_ctrl_mask == SPI_BPW_MASK(8) does not. Fixes: 0b2a740b424e ("iio: adc: ad7949: enable use with non 14/16-bit controllers") Closes: https://lore.kernel.org/linux-spi/c8b8a963-6cef-4c9b-bfef-dab2b7bd0b0f@sirena.org.uk/ Signed-off-by: David Lechner Reviewed-by: Andy Shevchenko Link: https://patch.msgid.link/20250611-iio-adc-ad7949-use-spi_is_bpw_supported-v1-1-c4e15bfd326e@baylibre.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: fix potential out-of-bound write

2025-08-01T08:51:23+00:00

[ Upstream commit 16285a0931869baa618b1f5d304e1e9d090470a8 ] The buffer is set to 20 characters. If a caller write more characters, count is truncated to the max available space in "simple_write_to_buffer". To protect from OoB access, check that the input size fit into buffer and add a zero terminator after copy to the end of the copied data. Fixes: 6d5dd486c715 iio: core: make use of simple_write_to_buffer() Signed-off-by: Markus Burri Link: https://patch.msgid.link/20250508130612.82270-4-markus.burri@mt.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: common: st_sensors: Fix use of uninitialize device structs

2025-07-24T06:58:31+00:00

commit 9f92e93e257b33e73622640a9205f8642ec16ddd upstream. Throughout the various probe functions &indio_dev->dev is used before it is initialized. This caused a kernel panic in st_sensors_power_enable() when the call to devm_regulator_bulk_get_enable() fails and then calls dev_err_probe() with the uninitialized device. This seems to only cause a panic with dev_err_probe(), dev_err(), dev_warn() and dev_info() don't seem to cause a panic, but are fixed as well. The issue is reported and traced here: [1] Link: https://lore.kernel.org/all/AM7P189MB100986A83D2F28AF3FFAF976E39EA@AM7P189MB1009.EURP189.PROD.OUTLOOK.COM/ [1] Cc: stable@vger.kernel.org Signed-off-by: Maud Spierings Reviewed-by: Andy Shevchenko Link: https://... [1] Link: https://patch.msgid.link/20250527-st_iio_fix-v4-1-12d89801c761@gocontroll.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: backend: fix out-of-bound write

2025-07-24T06:58:31+00:00

commit da9374819eb3885636934c1006d450c3cb1a02ed upstream. The buffer is set to 80 character. If a caller write more characters, count is truncated to the max available space in "simple_write_to_buffer". But afterwards a string terminator is written to the buffer at offset count without boundary check. The zero termination is written OUT-OF-BOUND. Add a check that the given buffer is smaller then the buffer to prevent. Fixes: 035b4989211d ("iio: backend: make sure to NULL terminate stack buffer") Signed-off-by: Markus Burri Reviewed-by: Nuno Sá Link: https://patch.msgid.link/20250508130612.82270-2-markus.burri@mt.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: stm32-adc: Fix race in installing chained IRQ handler

2025-07-24T06:58:31+00:00

commit e8ad595064f6ebd5d2d1a5d5d7ebe0efce623091 upstream. Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data(). Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core") Signed-off-by: Chen Ni Reviewed-by: Nuno Sá Tested-by: Fabrice Gasnier Reviewed-by: Fabrice Gasnier Link: https://patch.msgid.link/20250515083101.3811350-1-nichen@iscas.ac.cn Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: max1363: Reorder mode_list[] entries

2025-07-24T06:58:31+00:00

commit 8d8d7c1dbc46aa07a76acab7336a42ddd900be10 upstream. The IIO core issues warnings when a scan mask is a subset of a previous entry in the available_scan_masks array. On a board using a MAX11601, the following warning is observed: max1363 1-0064: available_scan_mask 7 subset of 6. Never used This occurs because the entries in the max11607_mode_list[] array are not ordered correctly. To fix this, reorder the entries so that no scan mask is a subset of an earlier one. While at it, reorder the mode_list[] arrays for other supported chips as well, to prevent similar warnings on different variants. Note fixes tag dropped as these were introduced over many commits a long time back and the side effect until recently was a reduction in sampling rate due to reading too many channels when only a few were desired. Now we have a sanity check that reports this error but that is not where the issue was introduced. Cc: stable@vger.kernel.org Signed-off-by: Fabio Estevam Acked-by: Matti Vaittinen Link: https://patch.msgid.link/20250516173900.677821-2-festevam@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]

2025-07-24T06:58:31+00:00

commit 6d21f2c2dd843bceefd9455f2919f6bb526797f0 upstream. Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"), booting a board populated with a MAX11601 results in a flood of warnings: max1363 1-0064: available_scan_mask 8 subset of 0. Never used max1363 1-0064: available_scan_mask 9 subset of 0. Never used max1363 1-0064: available_scan_mask 10 subset of 0. Never used max1363 1-0064: available_scan_mask 11 subset of 0. Never used max1363 1-0064: available_scan_mask 12 subset of 0. Never used max1363 1-0064: available_scan_mask 13 subset of 0. Never used ... These warnings are caused by incorrect offsets used for differential channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros. The max1363_mode_table[] defines the differential channel mappings as follows: MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12), MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13), MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14), MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15), MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16), MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17), MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18), MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19), MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20), MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21), MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22), MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23), Update the macros to follow this same pattern, ensuring that the scan masks are valid and preventing the warnings. Cc: stable@vger.kernel.org Suggested-by: Jonathan Cameron Signed-off-by: Fabio Estevam Acked-by: Matti Vaittinen Link: https://patch.msgid.link/20250516173900.677821-1-festevam@gmail.com Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: axp20x_adc: Add missing sentinel to AXP717 ADC channel maps

2025-07-24T06:58:31+00:00

commit 3281ddcea6429f7bc1fdb39d407752dd1371aba9 upstream. The AXP717 ADC channel maps is missing a sentinel entry at the end. This causes a KASAN warning. Add the missing sentinel entry. Fixes: 5ba0cb92584b ("iio: adc: axp20x_adc: add support for AXP717 ADC") Signed-off-by: Chen-Yu Tsai Link: https://patch.msgid.link/20250607135627.2086850-1-wens@kernel.org Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman