kernel/git/stable/linux.git/drivers/input/rmi4, branch master

Merge branch 'next' into for-linus

2026-08-15T04:26:07+00:00

Prepare input updates for 7.3 merge window.

Input: rmi4 - use platform data instead of query, when available

2026-08-13T19:13:43+00:00

Platform data may define touchscreen-x-mm and touchscreen-y-mm, but these were quietly overridden by data provided by sensor. Signed-off-by: David Heidelberg Link: https://patch.msgid.link/20260731-respect-x-y-mm-v1-0-3e85a4bec745@ixit.cz Link: https://patch.msgid.link/20260806-respect-x-y-mm-v2-1-e0681ed3d63c@ixit.cz Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue

2026-08-05T17:09:53+00:00

Previously, rmi_f54_buffer_queue() waited for the worker thread to finish but ignored whether it succeeded. If the worker failed (e.g., due to a timeout or register read failure), the queue thread would silently return success, delivering stale or uninitialized memory to userspace. Add a 'report_error' field to struct f54_data to store the worker's exit status. Check this field in rmi_f54_buffer_queue() after the worker finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error occurred. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Reported-by: sashiko-bot@kernel.org Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-6-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: rmi_smbus - remove conditional return with no effect

2026-08-05T04:27:53+00:00

Both branches of the check return the same value, so the check has no effect. Remove it and return the value directly. This is the result of running the Coccinelle script from scripts/coccinelle/misc/cond_return_no_effect.cocci. Signed-off-by: Sang-Heon Jeon Link: https://patch.msgid.link/20260729171001.260698-3-ekffu200098@gmail.com Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - block s_input when F54 queue is busy

2026-08-05T04:20:12+00:00

Changing the input (diagnostic report type) mid-stream changes the report size. Since V4L2 buffers are allocated based on the size at stream start, changing the input while streaming could lead to a heap buffer overflow if the new size is larger than the allocated buffers. Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue is busy (streaming). Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Reviewed-by: Hans Verkuil Link: https://patch.msgid.link/20260626051802.4033172-5-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer

2026-08-05T04:17:03+00:00

rmi_f54_work() reads a diagnostics report from the device into f54->report_data, sizing the transfer with rmi_f54_get_report_size(): report_size = rmi_f54_get_report_size(f54); ... for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) { int size = min(F54_REPORT_DATA_SIZE, report_size - i); ... rmi_read_block(.., f54->report_data + i, size); } report_data is allocated once at probe from F54's own electrode counts (array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))), but rmi_f54_get_report_size() computes the size from drv_data->num_*_electrodes when those are set, i.e. from the F55 function's electrode counts. Both counts come straight from device queries (F54 and F55 each report up to 255 electrodes) and nothing constrains the F55 counts to the F54 ones. A malicious or malfunctioning RMI4 device that reports larger F55 electrode counts than its F54 counts makes report_size exceed the allocation, so the read loop writes past report_data (and the V4L2 dequeue memcpy() then reads past it). On conforming hardware the F55 configured electrodes are a subset of the F54 physical electrodes, so report_size never exceeds the buffer and well-behaved devices are unaffected. Record the allocation size and reject a report that does not fit, mirroring the existing zero-size check. Fixes: c762cc68b6a1 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54") Cc: stable@vger.kernel.org Signed-off-by: Bryam Vargas Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-3-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - zero report size on F54 work error

2026-08-05T04:16:51+00:00

In rmi_f54_work(), if an error occurs during report request or command verification, the code jumped directly to the 'error' label, bypassing the 'abort' label where f54->report_size was normally zeroed out. This left f54->report_size containing its previous successful payload size. If a user then altered the V4L2 format to a smaller size, and a subsequent run failed, rmi_f54_buffer_queue() would copy the stale, larger payload size into the shrunken V4L2 buffer, causing a heap buffer overflow. Fix this by merging the 'abort' and 'error' labels into a single 'out' exit path, and ensuring that f54->report_size is always set to 0 on failure by checking for error and zeroing the local report_size first. Fixes: 3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics") Cc: stable@vger.kernel.org Reported-by: sashiko-bot@kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: synaptics-rmi4 - fix F55 transmitter electrode count typo

2026-08-05T04:16:42+00:00

During F55 sensor detection, the transmitter (TX) electrode count was incorrectly assigned the value of the receiver (RX) electrode count due to copy-paste typos. This incorrect value was then propagated to the driver data and used by F54 to determine the diagnostics report size. On devices with more RX than TX electrodes, this inflated the perceived TX count, leading to incorrect report size calculations and potential out-of-bounds buffer accesses. Fix the typos by correctly assigning the TX electrode counts. Fixes: 6adba43fd222 ("Input: synaptics-rmi4 - add support for F55 sensor tuning") Fixes: c762cc68b6a1 ("Input: synaptics-rmi4 - propagate correct number of rx and tx electrodes to F54") Reported-by: sashiko-bot@kernel.org Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Link: https://patch.msgid.link/20260626051802.4033172-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov

Input: rmi4 - tolerate short register descriptor structure

2026-06-27T05:23:40+00:00

Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports a register descriptor structure size that is too small for the number of registers it claims to have in the presence map. The remaining bytes in the structure are 0, which with the new strict bounds checking causes the parser to fail with -EIO, aborting the device probe. Tolerate such short reads by dropping the remaining (unparseable or 0-size) registers from the list instead of failing the probe, preventing the driver from trying to use them. Fixes: 0adb483fbf2d ("Input: rmi4 - refactor register descriptor parsing") Reported-by: Barry K. Nathan Tested-by: Barry K. Nathan Cc: stable@vger.kernel.org Assisted-by: Antigravity:gemini-3.5-flash Signed-off-by: Dmitry Torokhov

Revert "Input: rmi4 - fix register descriptor address calculation"

2026-06-27T05:22:42+00:00

The register descriptor presence register is a packet register, which means its bytes share a single RMI address. It does not occupy consecutive addresses, and the register structure that follows it is located at the next RMI address (presence_address + 1), not (presence_address + presence_size). Revert the incorrect address calculation introduced in commit a98518e72439. Reported-by: "Barry K. Nathan" Tested-by: "Barry K. Nathan" Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov