kernel/git/stable/linux.git/drivers/interconnect/qcom, branch linux-5.12.y

interconnect: qcom: Add missing MODULE_DEVICE_TABLE

2021-06-03T07:09:45+00:00

[ Upstream commit 1fd86e280d8b21762901e43d42d66dbfe8b8e0d3 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot Signed-off-by: Zou Wei Link: https://lore.kernel.org/r/1620704673-104205-1-git-send-email-zou_wei@huawei.com Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov Signed-off-by: Sasha Levin

interconnect: qcom: bcm-voter: add a missing of_node_put()

2021-06-03T07:09:44+00:00

[ Upstream commit a00593737f8bac2c9e97b696e7ff84a4446653e8 ] Add a missing of_node_put() in of_bcm_voter_get() to avoid the reference leak. Signed-off-by: Subbaraman Narayanamurthy Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1619116570-13308-1-git-send-email-subbaram@codeaurora.org Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Georgi Djakov Signed-off-by: Sasha Levin

interconnect: qcom: msm8939: remove rpm-ids from non-RPM nodes

2021-03-08T13:09:15+00:00

Some nodes are incorrectly marked as RPM-controlled (they have RPM master and slave ids assigned), but are actually controlled by the application CPU instead. The RPM complains when we send requests for resources that it can't control. Let's fix this by replacing the IDs, with the default "-1" in which case no requests are sent. See commit c497f9322af9 ("interconnect: qcom: msm8916: Remove rpm-ids from non-RPM nodes") where this was done for msm8916. Signed-off-by: Benjamin Li Reviewed-by: Jun Nie Link: https://lore.kernel.org/r/20210205015205.22947-3-benl@squareup.com Signed-off-by: Georgi Djakov

Merge branch 'icc-sdx55' into icc-next

2021-02-01T12:26:57+00:00

Add interconnect driver support for SDX55 platform for scaling the bandwidth requirements over RPMh. * icc-sdx55 dt-bindings: interconnect: Add Qualcomm SDX55 DT bindings interconnect: qcom: Add SDX55 interconnect provider driver Link: https://lore.kernel.org/r/20210121053254.8355-1-manivannan.sadhasivam@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: Add SDX55 interconnect provider driver

2021-01-27T11:11:33+00:00

Add driver for the Qualcomm interconnect buses found in SDX55 based platforms. The topology consists of several NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Based on SM8250 driver and generated from downstream dts. Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20210121053254.8355-3-manivannan.sadhasivam@linaro.org Signed-off-by: Georgi Djakov

Merge branch 'icc-msm8939' into icc-next

2021-01-11T17:59:36+00:00

Split shared RPM based interconnect operation code and add support for MSM8939 interconnect. * icc-msm8939 interconnect: qcom: Consolidate interconnect RPM support interconnect: qcom: qcs404: use shared code dt-bindings: interconnect: single yaml file for RPM interconnect drivers dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings interconnect: qcom: Add MSM8939 interconnect provider driver Signed-off-by: Georgi Djakov

interconnect: qcom: Add MSM8939 interconnect provider driver

2021-01-05T11:11:01+00:00

Add driver for the Qualcomm interconnect buses found in MSM8939 based platforms. The topology consists of four NoCs that are controlled by a remote processor that collects the aggregated bandwidth for each master-slave pairs. Signed-off-by: Jun Nie Link: https://lore.kernel.org/r/20201204075345.5161-6-jun.nie@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: qcs404: use shared code

2021-01-05T11:10:12+00:00

Use shared code for aggregate functionalities and probe function to remove duplicated code. Signed-off-by: Jun Nie Link: https://lore.kernel.org/r/20201204075345.5161-3-jun.nie@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: Consolidate interconnect RPM support

2021-01-05T11:09:58+00:00

Add RPM based interconnect driver implements the set and aggregate functionalities that translates bandwidth requests into RPM messages. These modules provide a common set of functionalities for all Qualcomm RPM based interconnect providers and should help reduce code duplication when adding new providers. Signed-off-by: Jun Nie Link: https://lore.kernel.org/r/20201204075345.5161-2-jun.nie@linaro.org Signed-off-by: Georgi Djakov

interconnect: qcom: fix rpmh link failures

2020-12-28T12:03:02+00:00

When CONFIG_COMPILE_TEST is set, it is possible to build some of the interconnect drivers into the kernel while their dependencies are loadable modules, which is bad: arm-linux-gnueabi-ld: drivers/interconnect/qcom/bcm-voter.o: in function `qcom_icc_bcm_voter_commit': (.text+0x1f8): undefined reference to `rpmh_invalidate' arm-linux-gnueabi-ld: (.text+0x20c): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2b0): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: (.text+0x2e8): undefined reference to `rpmh_write_batch' arm-linux-gnueabi-ld: drivers/interconnect/qcom/icc-rpmh.o: in function `qcom_icc_bcm_init': (.text+0x2ac): undefined reference to `cmd_db_read_addr' arm-linux-gnueabi-ld: (.text+0x2c8): undefined reference to `cmd_db_read_aux_data' The exact dependencies are a bit complicated, so split them out into a hidden Kconfig symbol that all drivers can in turn depend on to get it right. Fixes: 976daac4a1c5 ("interconnect: qcom: Consolidate interconnect RPMh support") Signed-off-by: Arnd Bergmann Reviewed-by: Bjorn Andersson Link: https://lore.kernel.org/r/20201204165030.3747484-1-arnd@kernel.org Signed-off-by: Georgi Djakov