kernel/git/stable/linux.git/drivers/media/common, branch linux-5.11.y

media: saa7146: use sg_dma_len when building pgtable

2021-05-14T08:49:52+00:00

[ Upstream commit e56429b09d5e0802b86f84ec7c24025886c9f88b ] The new AMD IOMMU DMA implementation concatenates sglist entries under certain conditions, and because saa7146 accessed the length member directly, it did not support this scenario. This fixes IO_PAGE_FAULTs by using the sg_dma_len macro. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Signed-off-by: Tasos Sahanidis Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing"

2021-01-12T14:49:12+00:00

The updated length check for dmabuf types broke existing usage in v4l2 userland clients. Fixes: 961d3b27 ("media: videobuf2: Fix length check for single plane dmabuf queueing") Cc: stable@vger.kernel.org Signed-off-by: Naushir Patuck Tested-by: Kieran Bingham Reviewed-by: Kieran Bingham Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2020-12-14T19:47:37+00:00

Pull media updates from Mauro Carvalho Chehab: - some rework at the uAPI pixel format docs - the smiapp driver has started to gain support for MIPI CSS camera sensors and was renamed - two new sensor drivers: ov02a10 and ov9734 - Meson gained a driver for the 2D acceleration unit - Rockchip rkisp1 driver was promoted from staging - Cedrus driver gained support for VP8 - two new remote controller keymaps were added - the usual set of fixes cleanups and driver improvements * tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits) media: ccs: Add support for obtaining C-PHY configuration from firmware media: ccs-pll: Print pixel rates media: ccs: Print written register values media: ccs: Add support for DDR OP SYS and OP PIX clocks media: ccs-pll: Add support for DDR OP system and pixel clocks media: ccs: Dual PLL support media: ccs-pll: Add trivial dual PLL support media: ccs-pll: Separate VT divisor limit calculation from the rest media: ccs-pll: Fix VT post-PLL divisor calculation media: ccs-pll: Make VT divisors 16-bit media: ccs-pll: Rework bounds checks media: ccs-pll: Print relevant information on PLL tree media: ccs-pll: Better separate OP and VT sub-tree calculation media: ccs-pll: Check for derating and overrating, support non-derating sensors media: ccs-pll: Split off VT subtree calculation media: ccs-pll: Add C-PHY support media: ccs-pll: Add sanity checks media: ccs-pll: Add support flexible OP PLL pixel clock divider media: ccs-pll: Support two cycles per pixel on OP domain media: ccs-pll: Add support for extended input PLL clock divider ...

Merge tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm

2020-12-14T19:07:56+00:00

Pull drm updates from Dave Airlie: "Not a huge amount of big things here, AMD has support for a few new HW variants (vangogh, green sardine, dimgrey cavefish), Intel has some more DG1 enablement. We have a few big reworks of the TTM layers and interfaces, GEM and atomic internal API reworks cross tree. fbdev is marked orphaned in here as well to reflect the current reality. core: - documentation updates - deprecate DRM_FORMAT_MOD_NONE - atomic crtc enable/disable rework - GEM convert drivers to gem object functions - remove SCATTER_LIST_MAX_SEGMENT sched: - avoid infinite waits ttm: - remove AGP support - don't modify caching for swapout - ttm pinning rework - major TTM reworks - new backend allocator - multihop support vram-helper: - top down BO placement fix - TTM changes - GEM object support displayport: - DP 2.0 DPCD prep work - DP MST extended DPCD caps fbdev: - mark as orphaned amdgpu: - Initial Vangogh support - Green Sardine support - Dimgrey Cavefish support - SG display support for renoir - SMU7 improvements - gfx9+ modiifier support - CI BACO fixes radeon: - expose voltage via hwmon on SUMO amdkfd: - fix unique id handling i915: - more DG1 enablement - bigjoiner support - integer scaling filter support - async flip support - ICL+ DSI command mode - Improve display shutdown - Display refactoring - eLLC machine fbdev loading fix - dma scatterlist fixes - TGL hang fixes - eLLC display buffer caching on SKL+ - MOCS PTE seeting for gen9+ msm: - Shutdown hook - GPU cooling device support - DSI 7nm and 10nm phy/pll updates - sm8150/sm2850 DPU support - GEM locking re-work - LLCC system cache support aspeed: - sysfs output config support ast: - LUT fix - new display mode gma500: - remove 2d framebuffer accel panfrost: - move gpu reset to a worker exynos: - new HDMI mode support mediatek: - MT8167 support - yaml bindings - MIPI DSI phy code moved etnaviv: - new perf counter - more lockdep annotation hibmc: - i2c DDC support ingenic: - pixel clock reset fix - reserved memory support - allow both DMA channels at once - different pixel format support - 30/24/8-bit palette modes tilcdc: - don't keep vblank irq enabled vc4: - new maintainer added - DSI registration fix virtio: - blob resource support - host visible and cross-device support - uuid api support" * tag 'drm-next-2020-12-11' of git://anongit.freedesktop.org/drm/drm: (1754 commits) drm/amdgpu: Initialise drm_gem_object_funcs for imported BOs drm/amdgpu: fix size calculation with stolen vga memory drm/amdgpu: remove amdgpu_ttm_late_init and amdgpu_bo_late_init drm/amdgpu: free the pre-OS console framebuffer after the first modeset drm/amdgpu: enable runtime pm using BACO on CI dGPUs drm/amdgpu/cik: enable BACO reset on Bonaire drm/amd/pm: update smu10.h WORKLOAD_PPLIB setting for raven drm/amd/pm: remove one unsupported smu function for vangogh drm/amd/display: setup system context for APUs drm/amd/display: add S/G support for Vangogh drm/amdkfd: Fix leak in dmabuf import drm/amdgpu: use AMDGPU_NUM_VMID when possible drm/amdgpu: fix sdma instance fw version and feature version init drm/amd/pm: update driver if version for dimgrey_cavefish drm/amd/display: 3.2.115 drm/amd/display: [FW Promotion] Release 0.0.45 drm/amd/display: Revert DCN2.1 dram_clock_change_latency update drm/amd/display: Enable gpu_vm_support for dcn3.01 drm/amd/display: Fixed the audio noise during mode switching with HDCP mode on drm/amd/display: Add wm table for Renoir ...

media: Rename stateful codec control macros

2020-12-03T11:27:32+00:00

For historical reasons, stateful codec controls are named as {}_MPEG_{}. While we can't at this point sanely change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER), we can least change the more meaningful macros such as classes macros. Signed-off-by: Ezequiel Garcia Tested-by: Jernej Skrabec Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: saa7146: switch from 'pci_' to 'dma_' API

2020-12-03T07:57:07+00:00

The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'saa7146_pgtable_alloc()' GFP_KERNEL can be used because the callers are either .buf_prepare functions or function that already use GFP_KERNEL (hidden in a 'vmalloc_32()' call). When memory is allocated in 'saa7146_init_one()' GFP_KERNEL can be used because it is probe function and no lock is taken in the between. When memory is allocated in 'saa7146_vv_init()' GFP_KERNEL can be used because this function already uses GFP_KERNEL and no lock is taken in the between. When memory is allocated in 'vbi_workaround()' GFP_KERNEL can be used because it is only called from a .open function. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: vb2: set cache sync hints when init buffers

2020-12-02T12:00:57+00:00

We need to set ->need_cache_sync_on_prepare and ->need_cache_sync_on_finish when we initialize vb2 buffer. Currently these flags are set/adjusted only in V4L2's vb2_queue_or_prepare_buf(), which means that for the code paths that don't use V4L2 vb2 will always tell videobuf2 core to skip ->prepare() and ->finish() cache syncs/flushes. Fix this by setting cache sync hints for new buffers; except VB2_MEMORY_DMABUF buffers, for which DMA exporter syncs caches. Fixes: f5f5fa73fbfb ("media: videobuf2: handle V4L2 buffer cache flags") Reported-by: Tomasz Figa Signed-off-by: Sergey Senozhatsky Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: siano: fix memory leak of debugfs members in smsdvb_hotplug

2020-11-26T13:26:19+00:00

When dvb_create_media_graph fails, the debugfs kept inside client should be released. However, the current implementation does not release them. Fix this by adding a new goto label to call smsdvb_debugfs_release. Fixes: 0d3ab8410dcb ("[media] dvb core: must check dvb_create_media_graph()") Signed-off-by: Keita Suzuki Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: Bulk remove BUG_ON(in_interrupt())

2020-11-16T09:31:10+00:00

None of these BUG_ON()'s is justified. BUG_ON() should only be used when there is really no way to survive. If at all these could be replaced by lockdep_assert_preemption_enabled() to cover all invalid caller context and not just those covered by in_interrupt(). But all functions which are invoked from those places contain already debug mechanisms to catch wrong context, so having these extra checks is not having any advantage. Signed-off-by: Thomas Gleixner Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: v4l2: allocate v4l2_clip objects early

2020-11-16T09:31:06+00:00

The v4l2_format based ioctls can have an indirect pointer to an array of v4l2_clip structures for overlay mode, depending on the 'type' member. There are only five drivers that use the overlay mode and copy the data through the __user pointer. Change the five drivers to use memcpy() instead, and copy the data in common code using the check_array_args() helpers. This allows for a subsequent patch that use the same mechanism for compat ioctl handlers. Note that there is another pointer for a 'bitmap' that is only used in the 'vivid' driver and nowhere else. There is no easy way to use the same trick without adding complexity to the common code, so this remains a __user pointer. [hverkuil: fix: CHECK: spaces preferred around that '*' (ctx:VxV)] [hverkuil: fix: CHECK: Alignment should match open parenthesis] Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab