kernel/git/stable/linux.git/drivers/media/common, branch linux-5.12.y

media: siano: Fix out-of-bounds warnings in smscore_load_firmware_family2()

2021-07-14T14:59:33+00:00

[ Upstream commit 13dfead49db07225335d4f587a560a2210391a1a ] Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of its msg_data array from 4 to 5 elements. Notice that at some point the 5th element of msg_data is being accessed in function smscore_load_firmware_family2(): 1006 trigger_msg->msg_data[4] = 4; /* Task ID */ Also, there is no need for the object _trigger_msg_ of type struct sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data in struct sms_msg_data is a one-element array, which causes multiple out-of-bounds warnings when accessing beyond its first element in function smscore_load_firmware_family2(): 992 struct sms_msg_data *trigger_msg = 993 (struct sms_msg_data *) msg; 994 995 pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n"); 996 SMS_INIT_MSG(&msg->x_msg_header, 997 MSG_SMS_SWDOWNLOAD_TRIGGER_REQ, 998 sizeof(struct sms_msg_hdr) + 999 sizeof(u32) * 5); 1000 1001 trigger_msg->msg_data[0] = firmware->start_address; 1002 /* Entry point */ 1003 trigger_msg->msg_data[1] = 6; /* Priority */ 1004 trigger_msg->msg_data[2] = 0x200; /* Stack size */ 1005 trigger_msg->msg_data[3] = 0; /* Parameter */ 1006 trigger_msg->msg_data[4] = 4; /* Task ID */ even when enough dynamic memory is allocated for _msg_: 929 /* PAGE_SIZE buffer shall be enough and dma aligned */ 930 msg = kmalloc(PAGE_SIZE, GFP_KERNEL | coredev->gfp_buf_flags); but as _msg_ is casted to (struct sms_msg_data *): 992 struct sms_msg_data *trigger_msg = 993 (struct sms_msg_data *) msg; the out-of-bounds warnings are actually valid and should be addressed. Fix this by declaring object _msg_ of type struct sms_msg_data5 *, which contains a 5-elements array, instead of just 4. And use _msg_ directly, instead of creating object trigger_msg. This helps with the ongoing efforts to enable -Warray-bounds by fixing the following warnings: CC [M] drivers/media/common/siano/smscoreapi.o drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’: drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1003 | trigger_msg->msg_data[1] = 6; /* Priority */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~ drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1004 | trigger_msg->msg_data[2] = 0x200; /* Stack size */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~ drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1005 | trigger_msg->msg_data[3] = 0; /* Parameter */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~ drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds] 1006 | trigger_msg->msg_data[4] = 4; /* Task ID */ | ~~~~~~~~~~~~~~~~~~~~~^~~ In file included from drivers/media/common/siano/smscoreapi.c:12: drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’ 619 | u32 msg_data[1]; | ^~~~~~~~ Fixes: 018b0c6f8acb ("[media] siano: make load firmware logic to work with newer firmwares") Co-developed-by: Kees Cook Signed-off-by: Kees Cook Signed-off-by: Gustavo A. R. Silva Signed-off-by: Sasha Levin

media: siano: fix device register error path

2021-07-14T14:59:21+00:00

[ Upstream commit 5368b1ee2939961a16e74972b69088433fc52195 ] As reported by smatch: drivers/media/common/siano/smsdvb-main.c:1231 smsdvb_hotplug() warn: '&client->entry' not removed from list If an error occur at the end of the registration logic, it won't drop the device from the list. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: saa7146: use sg_dma_len when building pgtable

2021-05-14T08:52:35+00:00

[ Upstream commit e56429b09d5e0802b86f84ec7c24025886c9f88b ] The new AMD IOMMU DMA implementation concatenates sglist entries under certain conditions, and because saa7146 accessed the length member directly, it did not support this scenario. This fixes IO_PAGE_FAULTs by using the sg_dma_len macro. Fixes: be62dbf554c5 ("iommu/amd: Convert AMD iommu driver to the dma-iommu api") Signed-off-by: Tasos Sahanidis Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

Merge tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm

2021-02-23T01:45:02+00:00

Pull follow_pfn() updates from Daniel Vetter: "Fixes around VM_FPNMAP and follow_pfn: - replace mm/frame_vector.c by get_user_pages in misc/habana and drm/exynos drivers, then move that into media as it's sole user - close race in generic_access_phys - s390 pci ioctl fix of this series landed in 5.11 already - properly revoke iomem mappings (/dev/mem, pci files)" * tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm: PCI: Revoke mappings like devmem PCI: Also set up legacy files only after sysfs init sysfs: Support zapping of binary attr mmaps resource: Move devmem revoke code to resource framework /dev/mem: Only set filp->f_mapping PCI: Obey iomem restrictions for procfs mmap mm: Close race in generic_access_phys media: videobuf2: Move frame_vector into media subsystem mm/frame-vector: Use FOLL_LONGTERM misc/habana: Use FOLL_LONGTERM for userptr misc/habana: Stop using frame_vector helpers drm/exynos: Use FOLL_LONGTERM for g2d cmdlists drm/exynos: Stop using frame_vector helpers

Merge tag 'v5.11-rc6' into patchwork

2021-02-01T09:03:45+00:00

Linux 5.11-rc6 * tag 'v5.11-rc6': (1466 commits) Linux 5.11-rc6 leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon dt-bindings: Cleanup standard unit properties soc: litex: Properly depend on HAS_IOMEM tty: avoid using vfs_iocb_iter_write() for redirected console writes null_blk: cleanup zoned mode initialization cifs: fix dfs domain referrals drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. io_uring: reinforce cancel on flush during exit cifs: returning mount parm processing errors correctly rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration ...

media: videobuf2-v4l2: remove redundant error test

2021-01-27T13:16:05+00:00

request_fd is validated under media_request_get_by_fd() just below this check. Thus remove it. Suggested-by: Tomasz Figa Signed-off-by: Helen Koike Reviewed-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing"

2021-01-12T14:49:12+00:00

The updated length check for dmabuf types broke existing usage in v4l2 userland clients. Fixes: 961d3b27 ("media: videobuf2: Fix length check for single plane dmabuf queueing") Cc: stable@vger.kernel.org Signed-off-by: Naushir Patuck Tested-by: Kieran Bingham Reviewed-by: Kieran Bingham Reviewed-by: Laurent Pinchart Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

media: videobuf2: Move frame_vector into media subsystem

2021-01-12T13:15:31+00:00

It's the only user. This also garbage collects the CONFIG_FRAME_VECTOR symbol from all over the tree (well just one place, somehow omap media driver still had this in its Kconfig, despite not using it). Reviewed-by: John Hubbard Acked-by: Hans Verkuil Acked-by: Mauro Carvalho Chehab Acked-by: Tomasz Figa Signed-off-by: Daniel Vetter Cc: Jason Gunthorpe Cc: Pawel Osciak Cc: Marek Szyprowski Cc: Kyungmin Park Cc: Tomasz Figa Cc: Mauro Carvalho Chehab Cc: Andrew Morton Cc: John Hubbard Cc: Jérôme Glisse Cc: Jan Kara Cc: Dan Williams Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: Daniel Vetter Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-7-daniel.vetter@ffwll.ch

mm/frame-vector: Use FOLL_LONGTERM

2021-01-12T13:15:17+00:00

This is used by media/videbuf2 for persistent dma mappings, not just for a single dma operation and then freed again, so needs FOLL_LONGTERM. Unfortunately current pup_locked doesn't support FOLL_LONGTERM due to locking issues. Rework the code to pull the pup path out from the mmap_sem critical section as suggested by Jason. By relying entirely on the vma checks in pin_user_pages and follow_pfn (for vm_flags and vma_is_fsdax) we can also streamline the code a lot. Note that pin_user_pages_fast is a safe replacement despite the seeming lack of checking for vma->vm_flasg & (VM_IO | VM_PFNMAP). Such ptes are marked with pte_mkspecial (which pup_fast rejects in the fastpath), and only architectures supporting that support the pin_user_pages_fast fastpath. Signed-off-by: Daniel Vetter Cc: Christoph Hellwig Cc: Jason Gunthorpe Cc: Pawel Osciak Cc: Marek Szyprowski Cc: Kyungmin Park Cc: Tomasz Figa Cc: Mauro Carvalho Chehab Cc: Andrew Morton Cc: John Hubbard Cc: Jérôme Glisse Cc: Jan Kara Cc: Dan Williams Cc: linux-mm@kvack.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-media@vger.kernel.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-6-daniel.vetter@ffwll.ch

media: videobuf2: always call poll_wait() on queues

2021-01-04T12:12:46+00:00

do_poll()/do_select() seem to set the _qproc member of poll_table to NULL the first time they are called on a given table, making subsequent calls of poll_wait() on that table no-ops. This is a problem for vb2 which calls poll_wait() on the V4L2 queues' waitqueues only when a queue-related event is requested, which may not necessarily be the case during the first poll. Fix this by making the call to poll_wait() happen first thing and unconditionally in vb2_core_poll(). Signed-off-by: Alexandre Courbot Signed-off-by: Mauro Carvalho Chehab