kernel/git/stable/linux.git/drivers/media/i2c, branch linux-4.4.y

Revert "tc358743: fix register i2c_rd/wr function fix"

2022-02-03T08:27:54+00:00

This reverts commit a3f9c74652c749486bf9e989caabcae6f68272ee. The reverted commit was backported and applied twice on the stable branch: - First as commit 44f3c2b6e5e9 ("tc358743: fix register i2c_rd/wr function fix") at the right position `i2c_wr8_and_or` - Then as commit a3f9c74652c7 ("tc358743: fix register i2c_rd/wr function fix") on the wrong function `i2c_wr16_and_or` Fixes: a3f9c74652c7 ("tc358743: fix register i2c_rd/wr function fix") Signed-off-by: Guillaume Bertholon Signed-off-by: Greg Kroah-Hartman

media: mt9p031: Fix corrupted frame after restarting stream

2021-11-26T10:58:37+00:00

[ Upstream commit 0961ba6dd211a4a52d1dd4c2d59be60ac2dc08c7 ] To prevent corrupted frames after starting and stopping the sensor its datasheet specifies a specific pause sequence to follow: Stopping: Set Pause_Restart Bit -> Set Restart Bit -> Set Chip_Enable Off Restarting: Set Chip_Enable On -> Clear Pause_Restart Bit The Restart Bit is cleared automatically and must not be cleared manually as this would cause undefined behavior. Signed-off-by: Dirk Bender Signed-off-by: Stefan Riedmueller Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

tc358743: fix register i2c_rd/wr function fix

2021-09-22T09:41:18+00:00

commit 4b0755e90ae03ba40174842af6fa810355960fbc upstream. The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil Cc: Mauro Carvalho Chehab Signed-off-by: Philipp Zabel Acked-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: tc358743: Fix error return code in tc358743_probe_of()

2021-07-20T14:22:33+00:00

[ Upstream commit a6b1e7093f0a099571fc8836ab4a589633f956a8 ] When the CSI bps per lane is not in the valid range, an appropriate error code -EINVAL should be returned. However, we currently do not explicitly assign this error code to 'ret'. As a result, 0 was incorrectly returned. Fixes: 256148246852 ("[media] tc358743: support probe from device tree") Reported-by: Hulk Robot Signed-off-by: Zhen Lei Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: I2C: change 'RST' to "RSET" to fix multiple build errors

2021-07-20T14:22:33+00:00

[ Upstream commit 8edcb5049ac29aa3c8acc5ef15dd4036543d747e ] The use of an enum named 'RST' conflicts with a #define macro named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h. The MIPS use of RST was there first (AFAICT), so change the media/i2c/ uses of RST to be named 'RSET'. 'git grep -w RSET' does not report any naming conflicts with the new name. This fixes multiple build errors: arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST' 356 | RST, | ^~~ ../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST' 180 | RST, | ^~~ ../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token 15 | #define RST (1 << 15) | ^ ../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST' 238 | RST, | ^~~ and some others that I have trimmed. Fixes: cac47f1822fc ("[media] V4L: Add S5C73M3 camera driver") Fixes: 8b99312b7214 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor") Fixes: 7d459937dc09 ("[media] Add driver for Samsung S5K5BAF camera sensor") Fixes: bfa8dd3a0524 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) Cc: Andrzej Hajda Cc: Sylwester Nawrocki Cc: Sangwook Lee Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: i2c: adv7511-v4l2: fix possible use-after-free in adv7511_remove()

2021-05-22T08:38:18+00:00

[ Upstream commit 2c9541720c66899adf6f3600984cf3ef151295ad ] This driver's remove path calls cancel_delayed_work(). However, that function does not wait until the work function finishes. This means that the callback function may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling cancel_delayed_work_sync(), which ensures that the work is properly cancelled, no longer running, and unable to re-schedule itself. Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: tc358743: initialize variable

2020-10-29T08:03:02+00:00

[ Upstream commit 274cf92d5dff5c2fec1a518078542ffe70d07646 ] clang static analysis flags this error tc358743.c:1468:9: warning: Branch condition evaluates to a garbage value return handled ? IRQ_HANDLED : IRQ_NONE; ^~~~~~~ handled should be initialized to false. Fixes: d747b806abf4 ("[media] tc358743: add direct interrupt handling") Signed-off-by: Tom Rix Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: m5mols: Check function pointer in m5mols_sensor_power

2020-10-29T08:03:02+00:00

[ Upstream commit 52438c4463ac904d14bf3496765e67750766f3a6 ] clang static analysis reports this error m5mols_core.c:767:4: warning: Called function pointer is null (null dereference) [core.CallAndMessage] info->set_power(&client->dev, 0); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In other places, the set_power ptr is checked. So add a check. Fixes: bc125106f8af ("[media] Add support for M-5MOLS 8 Mega Pixel camera ISP") Signed-off-by: Tom Rix Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: i2c: mt9v032: fix enum mbus codes and frame sizes

2020-02-28T14:38:53+00:00

[ Upstream commit 1451d5ae351d938a0ab1677498c893f17b9ee21d ] This driver supports both the mt9v032 (color) and the mt9v022 (mono) sensors. Depending on which sensor is used, the format from the sensor is different. The format.code inside the dev struct holds this information. The enum mbus and enum frame sizes need to take into account both type of sensors, not just the color one. To solve this, use the format.code in these functions instead of the hardcoded bayer color format (which is only used for mt9v032). [Sakari Ailus: rewrapped commit message] Suggested-by: Wenyou Yang Signed-off-by: Eugen Hristev Reviewed-by: Laurent Pinchart Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

media: ov6650: Fix .get_fmt() V4L2_SUBDEV_FORMAT_TRY support

2020-01-29T09:21:50+00:00

[ Upstream commit 39034bb0c26b76a2c3abc54aa28c185f18b40c2f ] Commit da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") converted a former ov6650_g_fmt() video operation callback to an ov6650_get_fmt() pad operation callback. However, the converted function disregards a format->which flag that pad operations should obey and always returns active frame format settings. That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with -EINVAL, or providing the response from a pad config argument, likely updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt(). Since implementation of the latter is trivial, go for it. Fixes: da298c6d98d5 ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") Signed-off-by: Janusz Krzysztofik Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin