kernel/git/stable/linux.git/drivers/media/rc, branch linux-4.17.y

media: rc: mce_kbd decoder: low timeout values cause double keydowns

2018-08-03T05:48:00+00:00

[ Upstream commit c421c62a4a08aba220ad7176ef4aa4b0ced9480a ] The mce keyboard repeats pressed keys every 100ms. If the IR timeout is set to less than that, we send key up events before the repeat arrives, so we have key up/key down for each IR repeat. The keyboard ends any sequence with a 0 scancode, in which case all keys are cleared so there is no need to run the timeout timer: it only exists for the case that the final 0 was not received. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

media: rc: mce_kbd decoder: fix stuck keys

2018-07-03T09:27:07+00:00

commit 63039c29f7a4ce8a8bd165173840543c0098d7b0 upstream. The MCE Remote sends a 0 scancode when keys are released. If this is not received or decoded, then keys can get "stuck"; the keyup event is not sent since the input_sync() is missing from the timeout handler. Cc: stable@vger.kernel.org Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

media: rc: ensure input/lirc device can be opened after register

2018-06-25T23:51:30+00:00

commit d7832cd2a3c87eb6ae1e802c88b6fc56c5823f6d upstream. Since commit cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") rc_open() will return -ENODEV if rcdev->registered is false. Ensure this is set before we register the input device and the lirc device, else we have a short window where the neither the lirc or input device can be opened. Fixes: cb84343fced1 ("media: lirc: do not call close() or open() on unregistered devices") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

MAINTAINERS & files: Canonize the e-mails I use at files

2018-05-04T10:21:06+00:00

From now on, I'll start using my @kernel.org as my development e-mail. As such, let's remove the entries that point to the old mchehab@s-opensource.com at MAINTAINERS file. For the files written with a copyright with mchehab@s-opensource, let's keep Samsung on their names, using mchehab+samsung@kernel.org, in order to keep pointing to my employer, with sponsors the work. For the files written before I join Samsung (on July, 4 2013), let's just use mchehab@kernel.org. For bug reports, we can simply point to just kernel.org, as this will reach my mchehab+samsung inbox anyway. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Brian Warner Signed-off-by: Mauro Carvalho Chehab

Merge tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2018-04-04T00:16:59+00:00

Pull media updates from Mauro Carvalho Chehab: - new CEC pin injection code for testing purposes - DVB frontend cxd2099 promoted from staging - new platform driver for Sony cxd2880 DVB devices - new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x, tw9910.c - removal of unused cx18 and ivtv alsa mixers - the reneseas-ceu driver doesn't depend on soc_camera anymore and moved from staging - removed the mantis_vp3028 driver, unused since 2009 - s5p-mfc: add support for version 10 of the MSP - added a decoder for imon protocol - atomisp: lots of cleanups - imx074 and mt9t031: don't depend on soc_camera anymore, being promoted from staging - added helper functions to better support DVB I2C binding - lots of driver improvements and cleanups * tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits) media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd) media: fimc-capture: get rid of two warnings media: dvb-usb-v2: fix a missing dependency of I2C_MUX media: uvc: to the right check at uvc_ioctl_enum_framesizes() media: cec-core: fix a bug at cec_error_inj_write() media: tda9840: cleanup a warning media: tm6000: avoid casting just to print pointer address media: em28xx-input: improve error handling code media: zr364xx: avoid casting just to print pointer address media: vivid-radio-rx: add a cast to avoid a warning media: saa7134-alsa: don't use casts to print a buffer address media: solo6x10: get rid of an address space warning media: zoran: don't cast pointers to print them media: ir-kbd-i2c: change the if logic to avoid a warning media: ir-kbd-i2c: improve error handling code media: saa7134-input: improve error handling media: s2255drv: fix a casting warning media: ivtvfb: Cleanup some warnings media: videobuf-dma-sg: Fix a weird cast soc_camera: fix a weird cast on printk ...

media: rc: mceusb: pid 0x0609 vid 0x031d does not under report carrier cycles

2018-03-21T18:03:03+00:00

This mceusb does not need the carrier count quirk, with it set it reports the carrier higher than it is. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: mceusb: add IR learning support features (IR carrier frequency measurement and wide-band/short-range receiver)

2018-03-21T18:02:21+00:00

Windows Media Center IR transceivers include two IR receivers; wide-band/short-range and narrow-band/long-range. The short-range (5cm distance) receiver is for IR learning and has IR carrier frequency measuring ability. Add mceusb driver support to select the short range IR receiver and enable pass through of its IR carrier frequency measurements. RC and LIRC already support these mceusb driver additions. Test platform: Linux raspberrypi 4.9.59-v7+ #1047 SMP Sun Oct 29 12:19:23 GMT 2017 armv7l GNU/Linux mceusb 1-1.2:1.0: Registered Pinnacle Systems PCTV Remote USB with mce emulator interface version 1 mceusb 1-1.2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active) Sony TV remote control ir-ctl from v4l-utils pi@raspberrypi:~ $ ir-ctl -V IR raw version 1.12.3 pi@raspberrypi:~ $ ir-ctl -m -r ... pulse 650 space 550 pulse 650 space 600 pulse 600 space 600 pulse 1200 space 600 pulse 650 space 550 pulse 650 space 600 pulse 600 space 600 pulse 550 carrier 40004 space 16777215 ^C pi@raspberrypi:~ $ exit Signed-off-by: A Sun Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc: meson-ir: lower timeout and make configurable

2018-03-21T17:59:38+00:00

A timeout of 200ms is much longer than necessary, and delays the decoding decoding of a single scancode and the last scancode when a button is being held. This makes the remote seem sluggish. If the min_timeout and max_timeout values are set, the timeout is configurable via the LIRC_SET_REC_TIMEOUT ioctl. Tested-by: Matthias Reichl Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: rc: meson-ir: add timeout on idle

2018-03-21T17:54:51+00:00

Meson doesn't seem to be able to generate timeout events in hardware. So install a software timer to generate the timeout events required by the decoders to prevent "ghost keypresses". Reported-by: Matthias Reichl Tested-by: Matthias Reichl Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab

media: imon: rename protocol from other to imon

2018-03-21T15:13:15+00:00

This renames the protocol for the imon rc driver from other to imon, since it is now an known protocol. Although different name will show up in the sysfs protocol file, loading a keymap using existing ir-keytable versions still works. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab