kernel/git/stable/linux.git/drivers/media/usb, branch linux-6.8.y

media: uvcvideo: Add quirk for Logitech Rally Bar

2024-05-30T07:49:41+00:00

[ Upstream commit 07731053d11f7647d5d8bc23caac997a4d562dfe ] Logitech Rally Bar devices, despite behaving as UVC cameras, have a different power management system that the other cameras from Logitech. USB_QUIRK_RESET_RESUME is applied to all the UVC cameras from Logitech at the usb core. Unfortunately, USB_QUIRK_RESET_RESUME causes undesired USB disconnects in the Rally Bar that make them completely unusable. There is an open discussion about if we should fix this in the core or add a quirk in the UVC driver. In order to enable this hardware, let's land this patch first, and we can revert it later if there is a different conclusion. Fixes: e387ef5c47dd ("usb: Add USB_QUIRK_RESET_RESUME for all Logitech UVC webcams") Acked-by: Greg Kroah-Hartman Reviewed-by: Devinder Khroad Reviewed-by: Sergey Senozhatsky Reviewed-by: Laurent Pinchart Signed-off-by: Ricardo Ribalda Link: https://lore.kernel.org/r/20240404-rallybar-v6-1-6d67bb6b69af@chromium.org Signed-off-by: Laurent Pinchart Signed-off-by: Sasha Levin

media: usbtv: Remove useless locks in usbtv_video_free()

2024-03-26T22:17:16+00:00

[ Upstream commit 65e6a2773d655172143cc0b927cdc89549842895 ] Remove locks calls in usbtv_video_free() because are useless and may led to a deadlock as reported here: https://syzkaller.appspot.com/x/bisect.txt?x=166dc872180000 Also remove usbtv_stop() call since it will be called when unregistering the device. Before 'c838530d230b' this issue would only be noticed if you disconnect while streaming and now it is noticeable even when disconnecting while not streaming. Fixes: c838530d230b ("media: media videobuf2: Be more flexible on the number of queue stored buffers") Fixes: f3d27f34fdd7 ("[media] usbtv: Add driver for Fushicai USBTV007 video frame grabber") Signed-off-by: Benjamin Gaignard Reviewed-by: Tomasz Figa Tested-by: Hans Verkuil Signed-off-by: Hans Verkuil [hverkuil: fix minor spelling mistake in log message] Signed-off-by: Sasha Levin

media: go7007: fix a memleak in go7007_load_encoder

2024-03-26T22:17:14+00:00

[ Upstream commit b9b683844b01d171a72b9c0419a2d760d946ee12 ] In go7007_load_encoder, bounce(i.e. go->boot_fw), is allocated without a deallocation thereafter. After the following call chain: saa7134_go7007_init |-> go7007_boot_encoder |-> go7007_load_encoder |-> kfree(go) go is freed and thus bounce is leaked. Fixes: 95ef39403f89 ("[media] go7007: remember boot firmware") Signed-off-by: Zhipeng Lu Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: pvrusb2: fix uaf in pvr2_context_set_notify

2024-03-26T22:17:14+00:00

[ Upstream commit 0a0b79ea55de8514e1750884e5fec77f9fdd01ee ] [Syzbot reported] BUG: KASAN: slab-use-after-free in pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35 Read of size 4 at addr ffff888113aeb0d8 by task kworker/1:1/26 CPU: 1 PID: 26 Comm: kworker/1:1 Not tainted 6.8.0-rc1-syzkaller-00046-gf1a27f081c1f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc4/0x620 mm/kasan/report.c:488 kasan_report+0xda/0x110 mm/kasan/report.c:601 pvr2_context_set_notify+0x2c4/0x310 drivers/media/usb/pvrusb2/pvrusb2-context.c:35 pvr2_context_notify drivers/media/usb/pvrusb2/pvrusb2-context.c:95 [inline] pvr2_context_disconnect+0x94/0xb0 drivers/media/usb/pvrusb2/pvrusb2-context.c:272 Freed by task 906: kasan_save_stack+0x33/0x50 mm/kasan/common.c:47 kasan_save_track+0x14/0x30 mm/kasan/common.c:68 kasan_save_free_info+0x3f/0x60 mm/kasan/generic.c:640 poison_slab_object mm/kasan/common.c:241 [inline] __kasan_slab_free+0x106/0x1b0 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inline] slab_free mm/slub.c:4299 [inline] kfree+0x105/0x340 mm/slub.c:4409 pvr2_context_check drivers/media/usb/pvrusb2/pvrusb2-context.c:137 [inline] pvr2_context_thread_func+0x69d/0x960 drivers/media/usb/pvrusb2/pvrusb2-context.c:158 [Analyze] Task A set disconnect_flag = !0, which resulted in Task B's condition being met and releasing mp, leading to this issue. [Fix] Place the disconnect_flag assignment operation after all code in pvr2_context_disconnect() to avoid this issue. Reported-and-tested-by: syzbot+ce750e124675d4599449@syzkaller.appspotmail.com Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload") Signed-off-by: Edward Adam Davis Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: pvrusb2: fix pvr2_stream_callback casts

2024-03-26T22:17:08+00:00

[ Upstream commit 30baa4a96b23add91a87305baaeba82c4e109e1f ] clang-16 complains about a control flow integrity (KCFI) issue in pvrusb2, which casts three different prototypes into pvr2_stream_callback: drivers/media/usb/pvrusb2/pvrusb2-v4l2.c:1070:30: error: cast from 'void (*)(struct pvr2_v4l2_fh *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 1070 | pvr2_stream_set_callback(sp,(pvr2_stream_callback)pvr2_v4l2_notify,fh); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/media/usb/pvrusb2/pvrusb2-context.c:110:6: error: cast from 'void (*)(struct pvr2_context *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 110 | (void (*)(void *))pvr2_context_notify, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/media/usb/pvrusb2/pvrusb2-dvb.c:152:6: error: cast from 'void (*)(struct pvr2_dvb_adapter *)' to 'pvr2_stream_callback' (aka 'void (*)(void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 152 | (pvr2_stream_callback) pvr2_dvb_notify, adap); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Change the functions to actually take a void* argument so the cast is no longer needed. Fixes: bb8ce9d9143c ("V4L/DVB (7682): pvrusb2-dvb: finish up stream & buffer handling") Signed-off-by: Arnd Bergmann Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: pvrusb2: remove redundant NULL check

2024-03-26T22:17:07+00:00

[ Upstream commit 95ac1210fb2753f968ebce0730d4fbc553c2a3dc ] Pointer dip->stream cannot be NULL due to a shift, thus remove redundant NULL check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: c74e0062684b ("V4L/DVB (5059): Pvrusb2: Be smarter about mode restoration") Signed-off-by: Daniil Dulov Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: go7007: add check of return value of go7007_read_addr()

2024-03-26T22:17:07+00:00

[ Upstream commit 0b70530ee740861f4776ff724fcc25023df1799a ] If go7007_read_addr() returns error channel is not assigned a value. In this case go to allocfail. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 866b8695d67e ("Staging: add the go7007 video driver") Signed-off-by: Daniil Dulov Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: em28xx: annotate unchecked call to media_device_register()

2024-03-26T22:17:02+00:00

[ Upstream commit fd61d77a3d28444b2635f0c8b5a2ecd6a4d94026 ] Static analyzers generate alerts for an unchecked call to `media_device_register()`. However, in this case, the device will work reliably without the media controller API. Add a comment above the call to prevent future unnecessary changes. Suggested-by: Mauro Carvalho Chehab Fixes: 37ecc7b1278f ("[media] em28xx: add media controller support") Signed-off-by: Nikita Zhandarovich Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin

media: videobuf2: core: Rename min_buffers_needed field in vb2_queue

2023-12-13T16:31:27+00:00

Rename min_buffers_needed into min_queued_buffers and update the documentation about it. Signed-off-by: Benjamin Gaignard Signed-off-by: Hans Verkuil [hverkuil: Drop the change where min_queued_buffers + 1 buffers would be] [hverkuil: allocated. Now this patch only renames this field instead of making] [hverkuil: a functional change as well.] [hverkuil: Renamed 3 remaining min_buffers_needed occurrences.]

media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations

2023-12-13T15:52:35+00:00

The subdev .[gs]_frame_interval are video operations, but they operate on pads (and even on streams). Not only is this confusing, it causes practical issues for drivers as the operations don't receive a subdev state pointer, requiring manual state handling. To improve the situation, turn the operations into pad operations, and extend them to receive a state pointer like other pad operations. While at it, rename the operations to .[gs]et_frame_interval at the same time to match the naming scheme of other pad operations. This isn't strictly necessary, but given that all drivers using those operations need to be modified, handling the rename separately would generate more churn for very little gain (if at all). Signed-off-by: Laurent Pinchart Reviewed-by: Hans Verkuil Reviewed-by: Philipp Zabel # for imx-media Reviewed-by: Luca Ceresoli # for tegra-video Signed-off-by: Hans Verkuil