kernel/git/stable/linux.git/drivers/media/video/tm6000, branch master

[media] rename most media/video usb drivers to media/usb

2012-08-15T19:25:07+00:00

Rename all USB drivers with their own directory under drivers/media/video into drivers/media/usb and update the building system. Signed-off-by: Mauro Carvalho Chehab

[media] common: move media/common/tuners to media/tuners

2012-08-14T02:40:28+00:00

Move the tuners one level up, as the "common" directory will be used by drivers that are shared between more than one driver. Signed-off-by: Mauro Carvalho Chehab

[media] move the dvb/frontends to drivers/media/dvb-frontends

2012-08-14T02:13:41+00:00

Raise the DVB frontends one level up, as the intention is to remove the drivers/media/dvb directory. Signed-off-by: Mauro Carvalho Chehab

[media] dvb: move the dvb core one level up

2012-08-14T02:08:14+00:00

just like the V4L2 core, move the DVB core to drivers/media, as the intention is to get rid of both "video" and "dvb" directories. Signed-off-by: Mauro Carvalho Chehab

[media] tm6000: remove V4L2_FL_LOCK_ALL_FOPS

2012-08-09T22:47:45+00:00

Add proper locking to the file operations, allowing for the removal of the V4L2_FL_LOCK_ALL_FOPS flag. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] v4l: fix compiler warnings

2012-05-14T17:49:38+00:00

media_build/v4l/adv7343.c: In function 'adv7343_setstd': media_build/v4l/adv7343.c:133:6: warning: variable 'output_idx' set but not used [-Wunused-but-set-variable] media_build/v4l/tvp5150.c: In function 'tvp5150_mbus_fmt': media_build/v4l/tvp5150.c:833:14: warning: variable 'std' set but not used [-Wunused-but-set-variable] media_build/v4l/tvp7002.c: In function 'tvp7002_query_dv_preset': media_build/v4l/tvp7002.c:673:18: warning: variable 'device' set but not used [-Wunused-but-set-variable] media_build/v4l/c-qcam.c: In function 'qc_capture': media_build/v4l/c-qcam.c:381:33: warning: variable 'bitsperxfer' set but not used [-Wunused-but-set-variable] media_build/v4l/pms.c: In function 'pms_s_std': media_build/v4l/pms.c:738:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] media_build/v4l/pms.c: In function 'init_mediavision': media_build/v4l/pms.c:959:6: warning: variable 'id' set but not used [-Wunused-but-set-variable] media_build/v4l/cx25821-alsa.c: In function 'cx25821_irq': media_build/v4l/cx25821-alsa.c:294:6: warning: variable 'audint_count' set but not used [-Wunused-but-set-variable] media_build/v4l/zr364xx.c: In function 'zr364xx_fillbuff': media_build/v4l/zr364xx.c:510:25: warning: variable 'frm' set but not used [-Wunused-but-set-variable] media_build/v4l/s2255drv.c: In function 's2255_fillbuff': media_build/v4l/s2255drv.c:637:23: warning: variable 'frm' set but not used [-Wunused-but-set-variable] media_build/v4l/s2255drv.c: In function 'vidioc_s_fmt_vid_cap': media_build/v4l/s2255drv.c:990:6: warning: variable 'norm' set but not used [-Wunused-but-set-variable] media_build/v4l/tm6000-stds.c: In function 'tm6000_set_audio_std': media_build/v4l/tm6000-stds.c:341:10: warning: variable 'nicam_flag' set but not used [-Wunused-but-set-variable] media_build/v4l/tm6000-video.c: In function 'get_next_buf': media_build/v4l/tm6000-video.c:172:8: warning: variable 'outp' set but not used [-Wunused-but-set-variable] media_build/v4l/tm6000-video.c: In function 'copy_streams': media_build/v4l/tm6000-video.c:214:36: warning: variable 'c' set but not used [-Wunused-but-set-variable] media_build/v4l/tm6000-input.c: In function 'tm6000_ir_urb_received': media_build/v4l/tm6000-input.c:171:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable] media_build/v4l/usbvision-core.c: In function 'usbvision_decompress': media_build/v4l/usbvision-core.c:604:23: warning: variable 'max_pos' set but not used [-Wunused-but-set-variable] media_build/v4l/usbvision-core.c: In function 'usbvision_parse_compress': media_build/v4l/usbvision-core.c:705:39: warning: variable 'rc' set but not used [-Wunused-but-set-variable] media_build/v4l/usbvision-core.c:705:22: warning: variable 'bytes_per_pixel' set but not used [-Wunused-but-set-variable] media_build/v4l/zoran_device.c: In function 'write_overlay_mask': media_build/v4l/zoran_device.c:545:6: warning: variable 'reg' set but not used [-Wunused-but-set-variable] media_build/v4l/go7007-v4l2.c: In function 'go7007_streamoff': media_build/v4l/go7007-v4l2.c:79:6: warning: variable 'retval' set but not used [-Wunused-but-set-variable] Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab

[media] v4l2-dev: add flag to have the core lock all file operations

2012-05-14T12:19:38+00:00

This used to be the default if the lock pointer was set, but now that lock is by default only used for ioctl serialization. Those drivers that already used core locking have this flag set explicitly, except for some drivers where it was obvious that there was no need to serialize any file operations other than ioctl. The drivers that didn't need this flag were: drivers/media/radio/dsbr100.c drivers/media/radio/radio-isa.c drivers/media/radio/radio-keene.c drivers/media/radio/radio-miropcm20.c drivers/media/radio/radio-mr800.c drivers/media/radio/radio-tea5764.c drivers/media/radio/radio-timb.c drivers/media/video/vivi.c sound/i2c/other/tea575x-tuner.c The other drivers that use core locking and where it was not immediately obvious that this flag wasn't needed were changed so that the flag is set together with a comment that that driver needs work to avoid having to set that flag. This will often involve taking the core lock in the fops themselves. Eventually this flag should go and it should not be used in new drivers. There are a few reasons why we want to avoid core locking of non-ioctl fops: in the case of mmap this can lead to a deadlock in rare situations since when mmap is called the mmap_sem is held and it is possible for other parts of the code to take that lock as well (copy_from_user()/copy_to_user() perform a down_read(&mm->mmap_sem) when a page fault occurs). It is very unlikely that that happens since the core lock serializes all fops, but the kernel warns about it if lock validation is turned on. For poll it is also undesirable to take the core lock as that can introduce increased latency. The same is true for read/write. While it was possible to make flags or something to turn on/off taking the core lock for each file operation, in practice it is much simpler to just not take it at all except for ioctl and leave it to the driver to take the lock. There are only a handful fops compared to the zillion ioctls we have. I also wanted to make it obvious which drivers still take the lock for all fops, so that's why I chose to have drivers set it explicitly. Signed-off-by: Hans Verkuil Acked-by: Hans de Goede Signed-off-by: Mauro Carvalho Chehab

[media] tm6000: don't use KERNEL_VERSION

2012-04-19T19:49:30+00:00

As reported by Marcos: > The output of "make versioncheck" told us that: > > drivers/staging/media/easycap/easycap_ioctl.c: 2442: need linux/version.h Now that drivers/media/video/v4l2-ioctl.c fills cap->version: case VIDIOC_QUERYCAP: { struct v4l2_capability *cap = (struct v4l2_capability *)arg; if (!ops->vidioc_querycap) break; cap->version = LINUX_VERSION_CODE; V4L2 drivers that use video_ioctl2() shouldn't initialize it anymore. Reported-by: Marcos Paulo de Souza Signed-off-by: Mauro Carvalho Chehab

[media] tm6000: Don't use pointer after freeing it in tm6000_ir_fini()

2012-02-08T12:59:56+00:00

In tm6000_ir_fini() there seems to be a problem. rc_unregister_device(ir->rc); calls rc_free_device() on the pointer it is given, which frees it. Subsequently the function does: if (!ir->polling) __tm6000_ir_int_stop(ir->rc); and __tm6000_ir_int_stop() dereferences the pointer it is given, which has already been freed. and it also does: tm6000_ir_stop(ir->rc); which also dereferences the (already freed) pointer. So, it seems that the call to rc_unregister_device() should be move below the calls to __tm6000_ir_int_stop() and tm6000_ir_stop(), so those don't operate on a already freed pointer. But, I must admit that I don't know this code *at all*, so someone who knows the code should take a careful look before applying this patch. It is based purely on inspection of facts of what is beeing freed where and not at all on understanding what the code does or why. I don't even have a means to test it, so beyond testing that the change compiles it has seen no testing what-so-ever. Anyway, here's a proposed patch. Signed-off-by: Jesper Juhl Reviewed-by: Thierry Reding Signed-off-by: Mauro Carvalho Chehab

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2012-01-15T20:49:56+00:00

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (655 commits) [media] revert patch: HDIC HD29L2 DMB-TH USB2.0 reference design driver mb86a20s: Add a few more register settings at the init seq mb86a20s: Group registers into the same line [media] [PATCH] don't reset the delivery system on DTV_CLEAR [media] [BUG] it913x-fe fix typo error making SNR levels unstable [media] cx23885: Query the CX25840 during enum_input for status [media] cx25840: Add support for g_input_status [media] rc-videomate-m1f.c Rename to match remote controler name [media] drivers: media: au0828: Fix dependency for VIDEO_AU0828 [media] convert drivers/media/* to use module_platform_driver() [media] drivers: video: cx231xx: Fix dependency for VIDEO_CX231XX_DVB [media] Exynos4 JPEG codec v4l2 driver [media] doc: v4l: selection: choose pixels as units for selection rectangles [media] v4l: s5p-tv: mixer: fix setup of VP scaling [media] v4l: s5p-tv: mixer: add support for selection API [media] v4l: emulate old crop API using extended crop/compose API [media] doc: v4l: add documentation for selection API [media] doc: v4l: add binary images for selection API [media] v4l: add support for selection api [media] hd29l2: fix review findings ...