kernel/git/stable/linux.git/drivers/mmc/host, branch linux-5.2.y

mmc: mtk-sd: Re-store SDIO IRQs mask at system resume

2019-10-05T11:13:57+00:00

[ Upstream commit 1c81d69d4c98aab56c5a7d5a810f84aefdb37e9b ] In cases when SDIO IRQs have been enabled, runtime suspend is prevented by the driver. However, this still means msdc_runtime_suspend|resume() gets called during system suspend/resume, via pm_runtime_force_suspend|resume(). This means during system suspend/resume, the register context of the mtk-sd device most likely loses its register context, even in cases when SDIO IRQs have been enabled. To re-enable the SDIO IRQs during system resume, the mtk-sd driver currently relies on the mmc core to re-enable the SDIO IRQs when it resumes the SDIO card, but this isn't the recommended solution. Instead, it's better to deal with this locally in the mtk-sd driver, so let's do that. Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: dw_mmc: Re-store SDIO IRQs mask at system resume

2019-10-05T11:13:56+00:00

[ Upstream commit 7c526608d5afb62cbc967225e2ccaacfdd142e9d ] In cases when SDIO IRQs have been enabled, runtime suspend is prevented by the driver. However, this still means dw_mci_runtime_suspend|resume() gets called during system suspend/resume, via pm_runtime_force_suspend|resume(). This means during system suspend/resume, the register context of the dw_mmc device most likely loses its register context, even in cases when SDIO IRQs have been enabled. To re-enable the SDIO IRQs during system resume, the dw_mmc driver currently relies on the mmc core to re-enable the SDIO IRQs when it resumes the SDIO card, but this isn't the recommended solution. Instead, it's better to deal with this locally in the dw_mmc driver, so let's do that. Tested-by: Matthias Kaehlcke Signed-off-by: Ulf Hansson Reviewed-by: Douglas Anderson Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci: Fix incorrect switch to HS mode

2019-10-05T11:13:56+00:00

[ Upstream commit c894e33ddc1910e14d6f2a2016f60ab613fd8b37 ] When switching from any MMC speed mode that requires 1.8v (HS200, HS400 and HS400ES) to High Speed (HS) mode, the system ends up configured for SDR12 with a 50MHz clock which is an illegal mode. This happens because the SDHCI_CTRL_VDD_180 bit in the SDHCI_HOST_CONTROL2 register is left set and when this bit is set, the speed mode is controlled by the SDHCI_CTRL_UHS field in the SDHCI_HOST_CONTROL2 register. The SDHCI_CTRL_UHS field will end up being set to 0 (SDR12) by sdhci_set_uhs_signaling() because there is no UHS mode being set. The fix is to change sdhci_set_uhs_signaling() to set the SDHCI_CTRL_UHS field to SDR25 (which is the same as HS) for any switch to HS mode. This was found on a new eMMC controller that does strict checking of the speed mode and the corresponding clock rate. It caused the switch to HS400 mode to fail because part of the sequence to switch to HS400 requires a switch from HS200 to HS before going to HS400. Suggested-by: Adrian Hunter Signed-off-by: Al Cooper Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: tmio: Fixup runtime PM management during remove

2019-09-19T07:10:56+00:00

commit 87b5d602a1cc76169b8d81ec2c74c8d95d9350dc upstream. Accessing the device when it may be runtime suspended is a bug, which is the case in tmio_mmc_host_remove(). Let's fix the behaviour. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Tested-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

mmc: tmio: Fixup runtime PM management during probe

2019-09-19T07:10:55+00:00

commit aa86f1a3887523d78bfadd1c4e4df8f919336511 upstream. The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the runtime PM status of the device, as to make it reflect the current status of the HW. This works fine for most cases, but unfortunate not for all. Especially, there is a generic problem when the device has a genpd attached and that genpd have the ->start|stop() callbacks assigned. More precisely, if the driver calls pm_runtime_set_active() during ->probe(), genpd does not get to invoke the ->start() callback for it, which means the HW isn't really fully powered on. Furthermore, in the next phase, when the device becomes runtime suspended, genpd will invoke the ->stop() callback for it, potentially leading to usage count imbalance problems, depending on what's implemented behind the callbacks of course. To fix this problem, convert to call pm_runtime_get_sync() from tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to avoid bumping usage counters and unnecessary re-initializing the HW the first time the tmio driver's ->runtime_resume() callback is called, introduce a state flag to keeping track of this. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Tested-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman

Revert "mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller"

2019-09-19T07:10:55+00:00

commit 49baa01c8b99ef92958e18fb58ebeb5dfdcde8af upstream. This reverts commit 414126f9e5abf1973c661d24229543a9458fa8ce. This commit broke eMMC storage access on a new consumer MiniPC based on AMD SoC, which has eMMC connected to: 02:00.0 SD Host controller: O2 Micro, Inc. Device 8620 (rev 01) (prog-if 01) Subsystem: O2 Micro, Inc. Device 0002 During probe, several errors are seen including: mmc1: Got data interrupt 0x02000000 even though no data operation was in progress. mmc1: Timeout waiting for hardware interrupt. mmc1: error -110 whilst initialising MMC card Reverting this commit allows the eMMC storage to be detected & usable again. Signed-off-by: Daniel Drake Fixes: 414126f9e5ab ("mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

Revert "mmc: bcm2835: Terminate timeout work synchronously"

2019-09-19T07:10:55+00:00

commit aea64b583601aa5e0d6ea51a0420e46e43710bd4 upstream. The commit 37fefadee8bb ("mmc: bcm2835: Terminate timeout work synchronously") causes lockups in case of hardware timeouts due the timeout work also calling cancel_delayed_work_sync() on its own. So revert it. Fixes: 37fefadee8bb ("mmc: bcm2835: Terminate timeout work synchronously") Cc: stable@vger.kernel.org Signed-off-by: Stefan Wahren Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-sprd: Fix the incorrect soft reset operation when runtime resuming

2019-09-16T06:23:22+00:00

[ Upstream commit c6303c5d52d5ec3e5bce2e6a5480fa2a1baa45e6 ] The SD host controller specification defines 3 types software reset: software reset for data line, software reset for command line and software reset for all. Software reset for all means this reset affects the entire Host controller except for the card detection circuit. In sdhci_runtime_resume_host() we always do a software "reset for all", which causes the Spreadtrum variant controller to work abnormally after resuming. To fix the problem, let's do a software reset for the data and the command part, rather than "for all". However, as sdhci_runtime_resume() is a common sdhci function and we don't want to change the behaviour for other variants, let's introduce a new in-parameter for it. This enables the caller to decide if a "reset for all" shall be done or not. Signed-off-by: Baolin Wang Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-sprd: add get_ro hook function

2019-09-06T08:23:49+00:00

[ Upstream commit 4eae8cbdff942a423926486be4e781a77d619966 ] sprd's sd host controller doesn't support write protect to sd card. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Chunyan Zhang Signed-off-by: Chunyan Zhang Reviewed-by: Baolin Wang Tested-by: Baolin Wang Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin

mmc: sdhci-sprd: Implement the get_max_timeout_count() interface

2019-09-06T08:23:49+00:00

[ Upstream commit 7486831d7d6aebcf851f9a4bbe65080351d5c9fb ] Implement the get_max_timeout_count() interface to set the Spredtrum SD host controller actual maximum timeout count. Signed-off-by: Baolin Wang Acked-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin